From: Tejun Heo <tj@kernel.org>
To: oleg@redhat.com, jan.kratochvil@redhat.com, vda.linux@googlemail.com
Cc: linux-kernel@vger.kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, indan@nul.nu, bdonlan@gmail.com,
Tejun Heo <tj@kernel.org>
Subject: [PATCH 6/9] job control: make task_clear_jobctl_pending() clear TRAPPING automatically
Date: Fri, 13 May 2011 17:46:17 +0200 [thread overview]
Message-ID: <1305301580-9924-7-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1305301580-9924-1-git-send-email-tj@kernel.org>
JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to
(re)transit into TRACED. task_clear_jobctl_pending() must be called
when either tracee enters TRACED or the transition is cancelled for
some reason. The former is achieved by explicitly calling
task_clear_jobctl_pending() in ptrace_stop() and the latter by calling
it at the end of do_signal_stop().
Calling task_clear_jobctl_trapping() at the end of do_signal_stop()
limits the scope TRAPPING can be used and is fragile in that seemingly
unrelated changes to tracee's control flow can lead to stuck TRAPPING.
We already have task_clear_jobctl_pending() calls on those cancelling
events to clear JOBCTL_STOP_PENDING. Cancellations can be handled by
making those call sites use JOBCTL_PENDING_MASK instead and updating
task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is
called automatically if no stop/trap is pending.
This patch makes the above changes and removes the fallback
task_clear_jobctl_trapping() call from do_signal_stop().
Signed-off-by: Tejun Heo <tj@kernel.org>
---
fs/exec.c | 2 +-
kernel/signal.c | 13 ++++++++-----
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/fs/exec.c b/fs/exec.c
index c654664..6ef8958 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1659,7 +1659,7 @@ static int zap_process(struct task_struct *start, int exit_code)
t = start;
do {
- task_clear_jobctl_pending(t, JOBCTL_STOP_PENDING);
+ task_clear_jobctl_pending(t, JOBCTL_PENDING_MASK);
if (t != current && t->mm) {
sigaddset(&t->pending.signal, SIGKILL);
signal_wake_up(t, 1);
diff --git a/kernel/signal.c b/kernel/signal.c
index e67eaa0..91e57d3 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -253,6 +253,9 @@ static void task_clear_jobctl_trapping(struct task_struct *task)
* %JOBCTL_PENDING_MASK. If %JOBCTL_STOP_PENDING is being cleared, other
* STOP bits are cleared together.
*
+ * If clearing of @mask leaves no stop or trap pending, this function calls
+ * task_clear_jobctl_trapping().
+ *
* CONTEXT:
* Must be called with @task->sighand->siglock held.
*/
@@ -264,6 +267,9 @@ void task_clear_jobctl_pending(struct task_struct *task, unsigned int mask)
mask |= JOBCTL_STOP_CONSUME | JOBCTL_STOP_DEQUEUED;
task->jobctl &= ~mask;
+
+ if (!(task->jobctl & JOBCTL_PENDING_MASK))
+ task_clear_jobctl_trapping(task);
}
/**
@@ -933,7 +939,7 @@ static void complete_signal(int sig, struct task_struct *p, int group)
signal->group_stop_count = 0;
t = p;
do {
- task_clear_jobctl_pending(t, JOBCTL_STOP_PENDING);
+ task_clear_jobctl_pending(t, JOBCTL_PENDING_MASK);
sigaddset(&t->pending.signal, SIGKILL);
signal_wake_up(t, 1);
} while_each_thread(p, t);
@@ -1168,7 +1174,7 @@ int zap_other_threads(struct task_struct *p)
p->signal->group_stop_count = 0;
while_each_thread(p, t) {
- task_clear_jobctl_pending(t, JOBCTL_STOP_PENDING);
+ task_clear_jobctl_pending(t, JOBCTL_PENDING_MASK);
count++;
/* Don't bother with already dead threads */
@@ -1964,9 +1970,6 @@ retry:
goto retry;
}
- /* PTRACE_ATTACH might have raced with task killing, clear trapping */
- task_clear_jobctl_trapping(current);
-
spin_unlock_irq(¤t->sighand->siglock);
tracehook_finish_jctl();
--
1.7.1
next prev parent reply other threads:[~2011-05-13 15:47 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-13 15:46 [PATCHSET ptrace] ptrace: prepare for PTRACE_SEIZE/INTERRUPT Tejun Heo
2011-05-13 15:46 ` [PATCH 1/9] job control: reorganize wait_task_stopped() Tejun Heo
2011-05-16 11:56 ` Oleg Nesterov
2011-05-13 15:46 ` [PATCH 2/9] job control: rename signal->group_stop and flags to jobctl and rearrange flags Tejun Heo
2011-05-13 15:46 ` [PATCH 3/9] ptrace: ptrace_check_attach(): rename @kill to @ignore_state and add comments Tejun Heo
2011-05-13 15:46 ` [PATCH 4/9] ptrace: relocate set_current_state(TASK_TRACED) in ptrace_stop() Tejun Heo
2011-05-16 11:57 ` Oleg Nesterov
2011-05-16 13:16 ` Tejun Heo
2011-05-16 15:51 ` Oleg Nesterov
2011-05-16 15:59 ` Tejun Heo
2011-05-16 16:34 ` Oleg Nesterov
2011-05-13 15:46 ` [PATCH 5/9] job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending() Tejun Heo
2011-05-13 15:46 ` Tejun Heo [this message]
2011-05-16 12:25 ` [PATCH 6/9] job control: make task_clear_jobctl_pending() clear TRAPPING automatically Oleg Nesterov
2011-05-16 13:24 ` Tejun Heo
2011-05-16 16:00 ` Oleg Nesterov
2011-05-16 16:09 ` Tejun Heo
2011-05-13 15:46 ` [PATCH 7/9] ptrace: use bit_waitqueue for TRAPPING instead of wait_chldexit Tejun Heo
2011-05-13 15:46 ` [PATCH 8/9] ptrace: move JOBCTL_TRAPPING wait to wait(2) and ptrace_check_attach() Tejun Heo
2011-05-14 14:22 ` [PATCH UPDATED " Tejun Heo
2011-05-16 12:11 ` Oleg Nesterov
2011-05-16 13:36 ` Tejun Heo
2011-05-16 16:04 ` Oleg Nesterov
2011-05-13 15:46 ` [PATCH 9/9] ptrace: make TRAPPING wait interruptible Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305301580-9924-7-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=bdonlan@gmail.com \
--cc=indan@nul.nu \
--cc=jan.kratochvil@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oleg@redhat.com \
--cc=torvalds@linux-foundation.org \
--cc=vda.linux@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome