From: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
To: Grant Likely <grant.likely@secretlab.ca>,
linux-kernel@vger.kernel.org,
alexander.stein@systec-electronic.com
Cc: qi.wang@intel.com, yong.y.wang@intel.com, joel.clark@intel.com,
kok.howg.ewe@intel.com, toshiharu-linux@dsn.okisemi.com,
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Subject: [PATCH v2 2/3] pch_gpio: Support new device ML7223
Date: Fri, 27 May 2011 14:04:50 +0900 [thread overview]
Message-ID: <1306472691-6055-2-git-send-email-tomoya-linux@dsn.okisemi.com> (raw)
In-Reply-To: <1306472691-6055-1-git-send-email-tomoya-linux@dsn.okisemi.com>
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub).
The ML7223 IOH is for MP(Media Phone) use.
The ML7223 is companion chip for Intel Atom E6xx series.
The ML7223 is completely compatible for Intel EG20T PCH.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
---
drivers/gpio/Kconfig | 8 +++++++-
drivers/gpio/pch_gpio.c | 1 +
include/linux/pci_ids.h | 2 ++
3 files changed, 10 insertions(+), 1 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d3b2953..c0326da 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -329,13 +329,19 @@ config GPIO_LANGWELL
Say Y here to support Intel Langwell/Penwell GPIO.
config GPIO_PCH
- tristate "PCH GPIO of Intel Topcliff"
+ tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO"
depends on PCI && X86
help
This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
which is an IOH(Input/Output Hub) for x86 embedded processor.
This driver can access PCH GPIO device.
+ This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+ Output Hub), ML7223.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7223 is companion chip for Intel Atom E6xx series.
+ ML7223 is completely compatible for Intel EG20T PCH.
+
config GPIO_ML_IOH
tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
depends on PCI
diff --git a/drivers/gpio/pch_gpio.c b/drivers/gpio/pch_gpio.c
index 4d1c9c6..b46c2bd 100644
--- a/drivers/gpio/pch_gpio.c
+++ b/drivers/gpio/pch_gpio.c
@@ -285,6 +285,7 @@ static int pch_gpio_resume(struct pci_dev *pdev)
static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20TPCH_GPIO) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 6322199..c249218 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1077,6 +1077,8 @@
#define PCI_VENDOR_ID_TCONRAD 0x10da
#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508
+#define PCI_VENDOR_ID_ROHM 0x10DB
+
#define PCI_VENDOR_ID_NVIDIA 0x10de
#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020
#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028
--
1.7.4
next prev parent reply other threads:[~2011-05-27 5:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-27 5:04 [PATCH v2 1/3] pch_gpio: add EG20T PCH GPIO device definition Tomoya MORINAGA
2011-05-27 5:04 ` Tomoya MORINAGA [this message]
2011-05-27 5:04 ` [PATCH v2 3/3] pch_gpio: support interrupt function Tomoya MORINAGA
2011-05-27 7:08 ` Grant Likely
2011-05-27 8:28 ` Tomoya MORINAGA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306472691-6055-2-git-send-email-tomoya-linux@dsn.okisemi.com \
--to=tomoya-linux@dsn.okisemi.com \
--cc=alexander.stein@systec-electronic.com \
--cc=grant.likely@secretlab.ca \
--cc=joel.clark@intel.com \
--cc=kok.howg.ewe@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=qi.wang@intel.com \
--cc=toshiharu-linux@dsn.okisemi.com \
--cc=yong.y.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®