From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Liam Girdwood <lrg@ti.com>, Tony Lindgren <tony@atomide.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
Peter Ujfalusi <peter.ujfalusi@ti.com>
Subject: [PATCH 0/8] MFD/ASoC: TWL4030/TWL6040 changes
Date: Wed, 1 Jun 2011 14:17:23 +0300 [thread overview]
Message-ID: <1306927051-8937-1-git-send-email-peter.ujfalusi@ti.com> (raw)
Hello,
The series will do three major things, and they are in one series, because they
pretty much depending on each other, so it is easier to handle them together.
1. Rename the twl4030-codec MFD driver to twl4030-audio
Since the ASoC multicomponent introduction (2.6.37) the twl4030-codec MFD dirver
had been using twl4030-audio to register (twl4030-codec is the ASoC codec
driver). The documentation refers to this part of twl as audio block, so it is
better to rename the driver as well to avoid confusion.
2. Introduction of MFD driver for twl6040.
The TWL6040 audio IC has codec and vibra functionality.
Convert the existing ASoC codec driver to use the new MFD driver's interface.
3. Vibrator driver for TWL6040 (Input/ForceFeedback driver)
The driver itself, and support for the vibrators in SDP4430 board.
The series has been tested on top of merged omap-next, asoc-next, and mfd-next.
It applies on top of linux-next as well.
Regards,
Peter
---
Misael Lopez Cruz (3):
mfd: twl6040: Add initial support
ASoC: twl6040: Convert into TWL6040 MFD child
input: Add initial support for TWL6040 vibrator
Peter Ujfalusi (5):
MFD: twl4030-codec: Rename internals from codec to audio
MFD: twl4030-codec -> twl4030-audio: Rename the driver
MFD: twl4030-audio: Rename platform data
MFD: twl6040: Change platform data for soc codec driver
OMAP4: SDP4430: Add twl6040 vibrator platform support
arch/arm/mach-omap2/board-3430sdp.c | 8 +-
arch/arm/mach-omap2/board-4430sdp.c | 50 +++-
arch/arm/mach-omap2/board-devkit8000.c | 8 +-
arch/arm/mach-omap2/board-igep0020.c | 8 +-
arch/arm/mach-omap2/board-omap3beagle.c | 8 +-
arch/arm/mach-omap2/board-omap3evm.c | 8 +-
arch/arm/mach-omap2/board-omap3pandora.c | 8 +-
arch/arm/mach-omap2/board-omap3stalker.c | 8 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 8 +-
arch/arm/mach-omap2/board-overo.c | 8 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 6 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 14 +-
arch/arm/plat-omap/include/plat/irqs.h | 12 +-
drivers/input/misc/Kconfig | 13 +-
drivers/input/misc/Makefile | 1 +
drivers/input/misc/twl4030-vibra.c | 12 +-
drivers/input/misc/twl6040-vibra.c | 428 +++++++++++++++++++
drivers/mfd/Kconfig | 8 +-
drivers/mfd/Makefile | 3 +-
drivers/mfd/twl-core.c | 13 +-
drivers/mfd/twl4030-audio.c | 278 ++++++++++++
drivers/mfd/twl4030-codec.c | 277 ------------
drivers/mfd/twl6040-core.c | 588 ++++++++++++++++++++++++++
drivers/mfd/twl6040-irq.c | 205 +++++++++
include/linux/i2c/twl.h | 21 +-
include/linux/mfd/twl4030-audio.h | 272 ++++++++++++
include/linux/mfd/twl4030-codec.h | 272 ------------
include/linux/mfd/twl6040.h | 260 ++++++++++++
sound/soc/codecs/Kconfig | 3 +-
sound/soc/codecs/twl4030.c | 22 +-
sound/soc/codecs/twl6040.c | 426 ++++---------------
sound/soc/codecs/twl6040.h | 118 -----
sound/soc/omap/sdp3430.c | 2 +-
sound/soc/omap/sdp4430.c | 2 +
sound/soc/omap/zoom2.c | 2 +-
35 files changed, 2290 insertions(+), 1090 deletions(-)
create mode 100644 drivers/input/misc/twl6040-vibra.c
create mode 100644 drivers/mfd/twl4030-audio.c
delete mode 100644 drivers/mfd/twl4030-codec.c
create mode 100644 drivers/mfd/twl6040-core.c
create mode 100644 drivers/mfd/twl6040-irq.c
create mode 100644 include/linux/mfd/twl4030-audio.h
delete mode 100644 include/linux/mfd/twl4030-codec.h
create mode 100644 include/linux/mfd/twl6040.h
--
1.7.5.3
next reply other threads:[~2011-06-01 11:18 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-01 11:17 Peter Ujfalusi [this message]
2011-06-01 11:17 ` [PATCH 1/8] MFD: twl4030-codec: Rename internals from codec to audio Peter Ujfalusi
2011-06-01 11:17 ` [PATCH 2/8] MFD: twl4030-codec -> twl4030-audio: Rename the driver Peter Ujfalusi
2011-06-01 11:17 ` [PATCH 3/8] MFD: twl4030-audio: Rename platform data Peter Ujfalusi
2011-06-01 12:07 ` Tony Lindgren
2011-06-01 12:54 ` Peter Ujfalusi
2011-06-01 13:00 ` Tony Lindgren
2011-06-01 13:17 ` Peter Ujfalusi
2011-06-01 13:38 ` Tony Lindgren
2011-06-02 6:15 ` Peter Ujfalusi
2011-06-03 8:08 ` Tony Lindgren
2011-06-03 13:38 ` Peter Ujfalusi
2011-06-06 9:55 ` Tony Lindgren
2011-06-01 11:17 ` [PATCH 4/8] mfd: twl6040: Add initial support Peter Ujfalusi
2011-06-01 13:47 ` T Krishnamoorthy, Balaji
2011-06-03 16:44 ` Peter Ujfalusi
2011-06-01 11:17 ` [PATCH 5/8] ASoC: twl6040: Convert into TWL6040 MFD child Peter Ujfalusi
2011-06-01 11:17 ` [PATCH 6/8] MFD: twl6040: Change platform data for soc codec driver Peter Ujfalusi
2011-06-01 11:17 ` [PATCH 7/8] input: Add initial support for TWL6040 vibrator Peter Ujfalusi
2011-06-01 11:17 ` [PATCH 8/8] OMAP4: SDP4430: Add twl6040 vibrator platform support Peter Ujfalusi
2011-06-02 8:29 ` [PATCH 0/8] MFD/ASoC: TWL4030/TWL6040 changes Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306927051-8937-1-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=sameo@linux.intel.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®