From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759778Ab1FAUkR (ORCPT ); Wed, 1 Jun 2011 16:40:17 -0400 Received: from opensource.wolfsonmicro.com ([80.75.67.52]:55814 "EHLO opensource2.wolfsonmicro.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1758951Ab1FAUkQ (ORCPT ); Wed, 1 Jun 2011 16:40:16 -0400 From: Mark Brown To: Samuel Ortiz Cc: Sascha Hauer , linux-kernel@vger.kernel.org, Mark Brown Subject: [PATCH] mfd: Support dynamic allocation of IRQ range for wm831x Date: Wed, 1 Jun 2011 21:39:32 +0100 Message-Id: <1306960772-329-1-git-send-email-broonie@opensource.wolfsonmicro.com> X-Mailer: git-send-email 1.7.5.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Use irq_allocate_desc() to get the IRQ range, which turns into a noop on non-sparse systems. Since all existing users are non-sparse there should be no compatibility issues. Signed-off-by: Mark Brown --- drivers/mfd/wm831x-irq.c | 15 ++++++++++++--- 1 files changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index b23d8d5..a25a7d5 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -527,9 +527,18 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq) 0xffff); } - if (!pdata || !pdata->irq_base) { - dev_err(wm831x->dev, - "No interrupt base specified, no interrupts\n"); + /* Try to dynamically allocate IRQs if no base is specified */ + if (!pdata || !pdata->irq_base) + wm831x->irq_base = -1; + else + wm831x->irq_base = pdata->irq_base; + + wm831x->irq_base = irq_alloc_descs(wm831x->irq_base, 0, + WM831X_NUM_IRQS, 0); + if (wm831x->irq_base < 0) { + dev_warn(wm831x->dev, "Failed to allocate IRQs: %d\n", + wm831x->irq_base); + wm831x->irq_base = 0; return 0; } -- 1.7.5.3