From: Glauber Costa <glommer@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Rik van Riel <riel@redhat.com>,
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>,
Peter Zijlstra <peterz@infradead.org>,
Avi Kivity <avi@redhat.com>,
Anthony Liguori <aliguori@us.ibm.com>,
Eric B Munson <emunson@mgebm.net>
Subject: [PATCH 6/7] KVM-GST: adjust scheduler cpu power
Date: Mon, 13 Jun 2011 19:31:36 -0400 [thread overview]
Message-ID: <1308007897-17013-7-git-send-email-glommer@redhat.com> (raw)
In-Reply-To: <1308007897-17013-1-git-send-email-glommer@redhat.com>
This is a first proposal for using steal time information
to influence the scheduler. There are a lot of optimizations
and fine grained adjustments to be done, but it is working reasonably
so far for me (mostly)
With this patch (and some host pinnings to demonstrate the situation),
two vcpus with very different steal time (Say 80 % vs 1 %) will not get
an even distribution of processes. This is a situation that can naturally
arise, specially in overcommited scenarios. Previosly, the guest scheduler
would wrongly think that all cpus have the same ability to run processes,
lowering the overall throughput.
Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: Rik van Riel <riel@redhat.com>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Avi Kivity <avi@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
CC: Eric B Munson <emunson@mgebm.net>
---
arch/x86/Kconfig | 12 ++++++++++++
kernel/sched.c | 36 +++++++++++++++++++++++++++---------
kernel/sched_features.h | 4 ++--
3 files changed, 41 insertions(+), 11 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index da34972..b26f312 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -512,6 +512,18 @@ menuconfig PARAVIRT_GUEST
if PARAVIRT_GUEST
+config PARAVIRT_TIME_ACCOUNTING
+ bool "Paravirtual steal time accounting"
+ select PARAVIRT
+ default n
+ ---help---
+ Select this option to enable fine granularity task steal time
+ accounting. Time spent executing other tasks in parallel with
+ the current vCPU is discounted from the vCPU power. To account for
+ that, there can be a small performance impact.
+
+ If in doubt, say N here.
+
source "arch/x86/xen/Kconfig"
config KVM_CLOCK
diff --git a/kernel/sched.c b/kernel/sched.c
index 154cb14..d6b2749 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -530,6 +530,9 @@ struct rq {
u64 prev_irq_time;
#endif
u64 prev_steal_time;
+#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
+ u64 prev_steal_time_acc;
+#endif
/* calc_load related fields */
unsigned long calc_load_update;
@@ -1955,10 +1958,13 @@ void account_system_vtime(struct task_struct *curr)
}
EXPORT_SYMBOL_GPL(account_system_vtime);
+#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
+
static void update_rq_clock_task(struct rq *rq, s64 delta)
{
- s64 irq_delta;
+ s64 irq_delta = 0, steal = 0;
+#ifdef CONFIG_IRQ_TIME_ACCOUNTING
irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
/*
@@ -1981,12 +1987,29 @@ static void update_rq_clock_task(struct rq *rq, s64 delta)
rq->prev_irq_time += irq_delta;
delta -= irq_delta;
+#endif
+#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
+ if (static_branch((¶virt_steal_rq_enabled))) {
+
+ steal = paravirt_steal_clock(cpu_of(rq));
+ steal -= rq->prev_steal_time_acc;
+
+ rq->prev_steal_time_acc += steal;
+
+ if (steal > delta)
+ steal = delta;
+
+ delta -= steal;
+ }
+#endif
+
rq->clock_task += delta;
- if (irq_delta && sched_feat(NONIRQ_POWER))
- sched_rt_avg_update(rq, irq_delta);
+ if ((irq_delta + steal) && sched_feat(NONTASK_POWER))
+ sched_rt_avg_update(rq, irq_delta + steal);
}
+#ifdef CONFIG_IRQ_TIME_ACCOUNTING
static int irqtime_account_hi_update(void)
{
struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
@@ -2021,12 +2044,7 @@ static int irqtime_account_si_update(void)
#define sched_clock_irqtime (0)
-static void update_rq_clock_task(struct rq *rq, s64 delta)
-{
- rq->clock_task += delta;
-}
-
-#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
+#endif
#include "sched_idletask.c"
#include "sched_fair.c"
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index be40f73..ca3b025 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -61,9 +61,9 @@ SCHED_FEAT(LB_BIAS, 1)
SCHED_FEAT(OWNER_SPIN, 1)
/*
- * Decrement CPU power based on irq activity
+ * Decrement CPU power based on time not spent running tasks
*/
-SCHED_FEAT(NONIRQ_POWER, 1)
+SCHED_FEAT(NONTASK_POWER, 1)
/*
* Queue remote wakeups on the target CPU and process them
--
1.7.3.4
next prev parent reply other threads:[~2011-06-13 23:39 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-13 23:31 [PATCH 0/7] KVM steal time implementation Glauber Costa
2011-06-13 23:31 ` [PATCH 1/7] KVM-HDR Add constant to represent KVM MSRs enabled bit Glauber Costa
2011-06-14 0:59 ` Rik van Riel
2011-06-14 1:18 ` Eric B Munson
2011-06-13 23:31 ` [PATCH 2/7] KVM-HDR: KVM Steal time implementation Glauber Costa
2011-06-14 1:19 ` Eric B Munson
2011-06-14 1:33 ` Rik van Riel
2011-06-13 23:31 ` [PATCH 3/7] KVM-HV: " Glauber Costa
2011-06-14 1:20 ` Eric B Munson
2011-06-14 7:45 ` Gleb Natapov
2011-06-15 1:01 ` Glauber Costa
2011-06-15 3:09 ` Glauber Costa
2011-06-15 9:09 ` Gleb Natapov
2011-06-16 3:31 ` Glauber Costa
2011-06-16 11:27 ` Gleb Natapov
2011-06-16 12:11 ` Glauber Costa
2011-06-16 12:21 ` Gleb Natapov
2011-06-16 12:24 ` Glauber Costa
2011-06-19 12:35 ` Avi Kivity
2011-06-19 12:59 ` Gleb Natapov
2011-06-19 13:02 ` Avi Kivity
2011-06-20 7:21 ` Gleb Natapov
2011-06-20 8:02 ` Avi Kivity
2011-06-20 12:42 ` Glauber Costa
2011-06-20 13:38 ` Gleb Natapov
2011-06-14 12:20 ` Rik van Riel
2011-06-13 23:31 ` [PATCH 4/7] KVM-GST: Add a pv_ops stub for steal time Glauber Costa
2011-06-14 1:20 ` Eric B Munson
2011-06-14 13:23 ` Rik van Riel
2011-06-13 23:31 ` [PATCH 5/7] KVM-GST: KVM Steal time accounting Glauber Costa
2011-06-14 1:21 ` Eric B Munson
2011-06-14 10:10 ` Peter Zijlstra
2011-06-15 1:08 ` Glauber Costa
2011-06-15 9:28 ` Peter Zijlstra
2011-06-13 23:31 ` Glauber Costa [this message]
2011-06-14 1:21 ` [PATCH 6/7] KVM-GST: adjust scheduler cpu power Eric B Munson
2011-06-14 2:47 ` Asias He
2011-06-14 10:42 ` Peter Zijlstra
2011-06-15 1:26 ` Glauber Costa
2011-06-20 14:41 ` Peter Zijlstra
2011-06-13 23:31 ` [PATCH 7/7] KVM-GST: KVM Steal time registration Glauber Costa
2011-06-14 1:21 ` Eric B Munson
2011-06-14 8:06 ` Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308007897-17013-7-git-send-email-glommer@redhat.com \
--to=glommer@redhat.com \
--cc=aliguori@us.ibm.com \
--cc=avi@redhat.com \
--cc=emunson@mgebm.net \
--cc=jeremy.fitzhardinge@citrix.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=riel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®