From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: linux-kernel@vger.kernel.org
Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>, Samuel Oritz <sameo@linux.intel.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Graeme Gregory <gg@slimlogic.co.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 4/8] ASoC: Use new register map API for ASoC generic physical I/O
Date: Mon, 20 Jun 2011 13:54:45 +0100 [thread overview]
Message-ID: <1308574489-31322-4-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1308574489-31322-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Remove all the ASoC specific physical I/O code and replace it with calls
into the regmap API. The bulk write code can only be used safely if all
regmap calls are locked with the CODEC lock, we need to add bulk support
to the regmap API or replace the code with an open coded loop (though
currently it has no users...).
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
include/sound/soc.h | 2 +
sound/soc/Kconfig | 1 +
sound/soc/soc-io.c | 316 ++++-----------------------------------------------
3 files changed, 28 insertions(+), 291 deletions(-)
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 6424b10..40436b8 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -19,6 +19,7 @@
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/regmap.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/control.h>
@@ -570,6 +571,7 @@ struct snd_soc_codec {
const void *reg_def_copy;
const struct snd_soc_cache_ops *cache_ops;
struct mutex cache_rw_mutex;
+ int val_bytes;
/* dapm */
struct snd_soc_dapm_context dapm;
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 8224db5..32e5fd4 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -7,6 +7,7 @@ menuconfig SND_SOC
select SND_PCM
select AC97_BUS if SND_SOC_AC97_BUS
select SND_JACK if INPUT=y || INPUT=SND
+ select REGMAP
---help---
If you want ASoC support, you should say Y here and also to the
diff --git a/sound/soc/soc-io.c b/sound/soc/soc-io.c
index cca490c..5607cb6 100644
--- a/sound/soc/soc-io.c
+++ b/sound/soc/soc-io.c
@@ -13,26 +13,13 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
+#include <linux/regmap.h>
#include <sound/soc.h>
#include <trace/events/asoc.h>
-#ifdef CONFIG_SPI_MASTER
-static int do_spi_write(void *control, const char *data, int len)
-{
- struct spi_device *spi = control;
- int ret;
-
- ret = spi_write(spi, data, len);
- if (ret < 0)
- return ret;
-
- return len;
-}
-#endif
-
-static int do_hw_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value, const void *data, int len)
+static int hw_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
{
int ret;
@@ -49,13 +36,7 @@ static int do_hw_write(struct snd_soc_codec *codec, unsigned int reg,
return 0;
}
- ret = codec->hw_write(codec->control_data, data, len);
- if (ret == len)
- return 0;
- if (ret < 0)
- return ret;
- else
- return -EIO;
+ return regmap_write(codec->control_data, reg, value);
}
static unsigned int hw_read(struct snd_soc_codec *codec, unsigned int reg)
@@ -69,8 +50,11 @@ static unsigned int hw_read(struct snd_soc_codec *codec, unsigned int reg)
if (codec->cache_only)
return -1;
- BUG_ON(!codec->hw_read);
- return codec->hw_read(codec, reg);
+ ret = regmap_read(codec->control_data, reg, &val);
+ if (ret == 0)
+ return val;
+ else
+ return ret;
}
ret = snd_soc_cache_read(codec, reg, &val);
@@ -79,183 +63,18 @@ static unsigned int hw_read(struct snd_soc_codec *codec, unsigned int reg)
return val;
}
-static int snd_soc_4_12_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 data;
-
- data = cpu_to_be16((reg << 12) | (value & 0xffffff));
-
- return do_hw_write(codec, reg, value, &data, 2);
-}
-
-static int snd_soc_7_9_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 data;
-
- data = cpu_to_be16((reg << 9) | (value & 0x1ff));
-
- return do_hw_write(codec, reg, value, &data, 2);
-}
-
-static int snd_soc_8_8_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- reg &= 0xff;
- data[0] = reg;
- data[1] = value & 0xff;
-
- return do_hw_write(codec, reg, value, data, 2);
-}
-
-static int snd_soc_8_16_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
- u16 val = cpu_to_be16(value);
-
- data[0] = reg;
- memcpy(&data[1], &val, sizeof(val));
-
- return do_hw_write(codec, reg, value, data, 3);
-}
-
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
-static unsigned int do_i2c_read(struct snd_soc_codec *codec,
- void *reg, int reglen,
- void *data, int datalen)
-{
- struct i2c_msg xfer[2];
- int ret;
- struct i2c_client *client = codec->control_data;
-
- /* Write register */
- xfer[0].addr = client->addr;
- xfer[0].flags = 0;
- xfer[0].len = reglen;
- xfer[0].buf = reg;
-
- /* Read data */
- xfer[1].addr = client->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = datalen;
- xfer[1].buf = data;
-
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret == 2)
- return 0;
- else if (ret < 0)
- return ret;
- else
- return -EIO;
-}
-#endif
-
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
-static unsigned int snd_soc_8_8_read_i2c(struct snd_soc_codec *codec,
- unsigned int r)
-{
- u8 reg = r;
- u8 data;
- int ret;
-
- ret = do_i2c_read(codec, ®, 1, &data, 1);
- if (ret < 0)
- return 0;
- return data;
-}
-#else
-#define snd_soc_8_8_read_i2c NULL
-#endif
-
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
-static unsigned int snd_soc_8_16_read_i2c(struct snd_soc_codec *codec,
- unsigned int r)
-{
- u8 reg = r;
- u16 data;
- int ret;
-
- ret = do_i2c_read(codec, ®, 1, &data, 2);
- if (ret < 0)
- return 0;
- return (data >> 8) | ((data & 0xff) << 8);
-}
-#else
-#define snd_soc_8_16_read_i2c NULL
-#endif
-
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
-static unsigned int snd_soc_16_8_read_i2c(struct snd_soc_codec *codec,
- unsigned int r)
-{
- u16 reg = r;
- u8 data;
- int ret;
-
- ret = do_i2c_read(codec, ®, 2, &data, 1);
- if (ret < 0)
- return 0;
- return data;
-}
-#else
-#define snd_soc_16_8_read_i2c NULL
-#endif
-
-static int snd_soc_16_8_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
- u16 rval = cpu_to_be16(reg);
-
- memcpy(data, &rval, sizeof(rval));
- data[2] = value;
-
- return do_hw_write(codec, reg, value, data, 3);
-}
-
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
-static unsigned int snd_soc_16_16_read_i2c(struct snd_soc_codec *codec,
- unsigned int r)
-{
- u16 reg = cpu_to_be16(r);
- u16 data;
- int ret;
-
- ret = do_i2c_read(codec, ®, 2, &data, 2);
- if (ret < 0)
- return 0;
- return be16_to_cpu(data);
-}
-#else
-#define snd_soc_16_16_read_i2c NULL
-#endif
-
-static int snd_soc_16_16_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 data[2];
-
- data[0] = cpu_to_be16(reg);
- data[1] = cpu_to_be16(value);
-
- return do_hw_write(codec, reg, value, data, sizeof(data));
-}
-
/* Primitive bulk write support for soc-cache. The data pointed to by
- * `data' needs to already be in the form the hardware expects
- * including any leading register specific data. Any data written
- * through this function will not go through the cache as it only
- * handles writing to volatile or out of bounds registers.
+ * `data' needs to already be in the form the hardware expects. Any
+ * data written through this function will not go through the cache as
+ * it only handles writing to volatile or out of bounds registers.
+ *
+ * This is currently only supported for devices using the regmap API
+ * wrappers.
*/
-static int snd_soc_hw_bulk_write_raw(struct snd_soc_codec *codec, unsigned int reg,
+static int snd_soc_hw_bulk_write_raw(struct snd_soc_codec *codec,
+ unsigned int reg,
const void *data, size_t len)
{
- int ret;
-
/* To ensure that we don't get out of sync with the cache, check
* whether the base register is volatile or if we've directly asked
* to bypass the cache. Out of bounds registers are considered
@@ -266,66 +85,9 @@ static int snd_soc_hw_bulk_write_raw(struct snd_soc_codec *codec, unsigned int r
&& reg < codec->driver->reg_cache_size)
return -EINVAL;
- switch (codec->control_type) {
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
- case SND_SOC_I2C:
- ret = i2c_master_send(to_i2c_client(codec->dev), data, len);
- break;
-#endif
-#if defined(CONFIG_SPI_MASTER)
- case SND_SOC_SPI:
- ret = spi_write(to_spi_device(codec->dev), data, len);
- break;
-#endif
- default:
- BUG();
- }
-
- if (ret == len)
- return 0;
- if (ret < 0)
- return ret;
- else
- return -EIO;
+ return regmap_raw_write(codec->control_data, reg, data, len);
}
-static struct {
- int addr_bits;
- int data_bits;
- int (*write)(struct snd_soc_codec *codec, unsigned int, unsigned int);
- unsigned int (*read)(struct snd_soc_codec *, unsigned int);
- unsigned int (*i2c_read)(struct snd_soc_codec *, unsigned int);
-} io_types[] = {
- {
- .addr_bits = 4, .data_bits = 12,
- .write = snd_soc_4_12_write,
- },
- {
- .addr_bits = 7, .data_bits = 9,
- .write = snd_soc_7_9_write,
- },
- {
- .addr_bits = 8, .data_bits = 8,
- .write = snd_soc_8_8_write,
- .i2c_read = snd_soc_8_8_read_i2c,
- },
- {
- .addr_bits = 8, .data_bits = 16,
- .write = snd_soc_8_16_write,
- .i2c_read = snd_soc_8_16_read_i2c,
- },
- {
- .addr_bits = 16, .data_bits = 8,
- .write = snd_soc_16_8_write,
- .i2c_read = snd_soc_16_8_read_i2c,
- },
- {
- .addr_bits = 16, .data_bits = 16,
- .write = snd_soc_16_16_write,
- .i2c_read = snd_soc_16_16_read_i2c,
- },
-};
-
/**
* snd_soc_codec_set_cache_io: Set up standard I/O functions.
*
@@ -349,46 +111,18 @@ int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
int addr_bits, int data_bits,
enum snd_soc_control_type control)
{
- int i;
+ struct regmap_config config;
- for (i = 0; i < ARRAY_SIZE(io_types); i++)
- if (io_types[i].addr_bits == addr_bits &&
- io_types[i].data_bits == data_bits)
- break;
- if (i == ARRAY_SIZE(io_types)) {
- printk(KERN_ERR
- "No I/O functions for %d bit address %d bit data\n",
- addr_bits, data_bits);
- return -EINVAL;
- }
-
- codec->write = io_types[i].write;
+ codec->write = hw_write;
codec->read = hw_read;
codec->bulk_write_raw = snd_soc_hw_bulk_write_raw;
- switch (control) {
- case SND_SOC_I2C:
-#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
- codec->hw_write = (hw_write_t)i2c_master_send;
-#endif
- if (io_types[i].i2c_read)
- codec->hw_read = io_types[i].i2c_read;
-
- codec->control_data = container_of(codec->dev,
- struct i2c_client,
- dev);
- break;
+ config.reg_bits = addr_bits;
+ config.val_bits = data_bits;
- case SND_SOC_SPI:
-#ifdef CONFIG_SPI_MASTER
- codec->hw_write = do_spi_write;
-#endif
-
- codec->control_data = container_of(codec->dev,
- struct spi_device,
- dev);
- break;
- }
+ codec->control_data = regmap_init(codec->dev, &config);
+ if (IS_ERR(codec->control_data))
+ return PTR_ERR(codec->control_data);
return 0;
}
--
1.7.5.4
next prev parent reply other threads:[~2011-06-20 12:56 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-20 12:46 [PATCH 0/8] Generic I2C and SPI register map library Mark Brown
2011-06-20 12:54 ` [PATCH 1/8] regmap: Add generic non-memory mapped register access API Mark Brown
2011-06-20 12:54 ` [PATCH 2/8] regmap: Add I2C bus support Mark Brown
2011-06-20 23:22 ` Lars-Peter Clausen
2011-06-20 23:41 ` Mark Brown
2011-06-21 0:01 ` Lars-Peter Clausen
2011-06-20 12:54 ` [PATCH 3/8] regmap: Add SPI " Mark Brown
2011-06-20 23:26 ` Lars-Peter Clausen
2011-06-20 23:45 ` Mark Brown
2011-06-21 0:00 ` Lars-Peter Clausen
2011-06-20 12:54 ` Mark Brown [this message]
2011-06-20 12:54 ` [PATCH 5/8] mfd: Convert WM831x to use regmap API Mark Brown
2011-06-20 12:54 ` [PATCH 6/8] mfd: Convert WM8994 to use new register map API Mark Brown
2011-06-20 12:54 ` [PATCH 7/8] mfd: Convert pcf50633 " Mark Brown
2011-06-20 12:54 ` [PATCH 8/8] regulator: Convert tps65023 to use regmap API Mark Brown
2011-06-20 23:15 ` [PATCH 1/8] regmap: Add generic non-memory mapped register access API Lars-Peter Clausen
2011-06-21 0:14 ` Mark Brown
2011-06-21 0:45 ` Lars-Peter Clausen
2011-06-21 1:24 ` Mark Brown
2011-06-21 11:47 ` Dimitris Papastamos
2011-06-21 12:07 ` Mark Brown
2011-06-21 11:43 ` Dimitris Papastamos
2011-06-21 12:07 ` Mark Brown
2011-06-22 18:44 [PATCH 0/8] Generic I2C and SPI register map library Mark Brown
2011-06-22 18:45 ` [PATCH 1/8] regmap: Add generic non-memory mapped register access API Mark Brown
2011-06-22 18:45 ` [PATCH 4/8] ASoC: Use new register map API for ASoC generic physical I/O Mark Brown
2011-06-30 5:58 [PATCH 0/8] regmap: Generic I2C and SPI register map library Mark Brown
2011-06-30 6:00 ` [PATCH 1/8] regmap: Add generic non-memory mapped register access API Mark Brown
2011-06-30 6:00 ` [PATCH 4/8] ASoC: Use new register map API for ASoC generic physical I/O Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308574489-31322-4-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=dp@opensource.wolfsonmicro.com \
--cc=gg@slimlogic.co.uk \
--cc=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome