[PATCH 3/3]Remove one to many lll's in some comments.

["Justin P. Mattock" <justinmattock@gmail.com>]

From: "Justin P. Mattock" <justinmattock@gmail.com>

The patch below fixes some comments.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>

---
 drivers/acpi/acpica/hwxface.c  |    2 +-
 drivers/parport/parport_mfc3.c |    2 +-
 include/net/mac80211.h         |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index f75f81a..f34ba22 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -355,7 +355,7 @@ ACPI_EXPORT_SYMBOL(acpi_read_bit_register)
  *
  * PARAMETERS:  register_id     - ID of ACPI Bit Register to access
  *              Value           - Value to write to the register, in bit
- *                                position zero. The bit is automaticallly
+ *                                position zero. The bit is automatically
  *                                shifted to the correct position.
  *
  * RETURN:      Status
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
index 362db31..1c0c642 100644
--- a/drivers/parport/parport_mfc3.c
+++ b/drivers/parport/parport_mfc3.c
@@ -397,7 +397,7 @@ static void __exit parport_mfc3_exit(void)
 
 
 MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
-MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Paralllel Port");
+MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Parallel Port");
 MODULE_SUPPORTED_DEVICE("Multiface 3 Parallel Port");
 MODULE_LICENSE("GPL");
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index e6d6a66..7486e4d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1390,7 +1390,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  * DOC: Beacon filter support
  *
  * Some hardware have beacon filter support to reduce host cpu wakeups
- * which will reduce system power consumption. It usuallly works so that
+ * which will reduce system power consumption. It usually works so that
  * the firmware creates a checksum of the beacon but omits all constantly
  * changing elements (TSF, TIM etc). Whenever the checksum changes the
  * beacon is forwarded to the host, otherwise it will be just dropped. That
-- 
1.7.5.4