From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753706Ab1GINmP (ORCPT ); Sat, 9 Jul 2011 09:42:15 -0400 Received: from mail-pz0-f46.google.com ([209.85.210.46]:46990 "EHLO mail-pz0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753351Ab1GINmN (ORCPT ); Sat, 9 Jul 2011 09:42:13 -0400 From: Ravishankar To: gregkh@suse.de, wfp5p@virginia.edu Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, Ravishankar , Ravishankar Subject: [PATCH 2/2] Staging: comedi: fix warning: line over 80 character issue in s626.c Date: Sat, 9 Jul 2011 19:24:43 +0530 Message-Id: <1310219683-26160-1-git-send-email-ravishankarkm32@gmail.com> X-Mailer: git-send-email 1.6.5.2 In-Reply-To: <[PATCH 2/2]STAGING: Comedi: fix warning: line over 80 character issue in s626.c> References: <[PATCH 2/2]STAGING: Comedi: fix warning: line over 80 character issue in s626.c> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Ravishankar This is a patch to the s626.c file that fixes up a warning: line over 80 character found by the checkpatch.pl tool Signed-off-by: Ravishankar --- drivers/staging/comedi/drivers/s626.c | 16 ++++++++++------ 1 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c index 290d4d8..fee5faa 100644 --- a/drivers/staging/comedi/drivers/s626.c +++ b/drivers/staging/comedi/drivers/s626.c @@ -338,7 +338,8 @@ struct enc_private { uint16_t(*GetIntSrc) (struct comedi_device *dev, struct enc_private *); uint16_t(*GetLoadTrig) (struct comedi_device *dev, struct enc_private *); /* Return preload trigger source. */ uint16_t(*GetMode) (struct comedi_device *dev, struct enc_private *); /* Return standardized operating mode. */ - void (*PulseIndex) (struct comedi_device *dev, struct enc_private *); /* Generate soft index strobe. */ + /* Generate soft index strobe. */ + void (*PulseIndex) (struct comedi_device *dev, struct enc_private *); void (*SetEnable) (struct comedi_device *dev, struct enc_private *, uint16_t enab); /* Program clock enable. */ void (*SetIntSrc) (struct comedi_device *dev, struct enc_private *, uint16_t IntSource); /* Program interrupt source. */ void (*SetLoadTrig) (struct comedi_device *dev, struct enc_private *, uint16_t Trig); /* Program preload trigger source. */ @@ -349,7 +350,8 @@ struct enc_private { uint16_t MyCRB; /* Address of CRB register. */ uint16_t MyLatchLsw; /* Address of Latch least-significant-word */ /* register. */ - uint16_t MyEventBits[4]; /* Bit translations for IntSrc -->RDMISC2. */ + /* Bit translations for IntSrc -->RDMISC2. */ + uint16_t MyEventBits[4]; }; #define encpriv ((struct enc_private *)(dev->subdevices+5)->private) @@ -784,7 +786,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* | DEBI_CFG_INCQ| DEBI_CFG_16Q); //end */ /* Paging is disabled. */ - WR7146(P_DEBIPAGE, DEBI_PAGE_DISABLE); /* Disable MMU paging. */ + /* Disable MMU paging. */ + WR7146(P_DEBIPAGE, DEBI_PAGE_DISABLE); /* Init GPIO so that ADC Start* is negated. */ WR7146(P_GPIO, GPIO_BASE | GPIO1_HI); @@ -809,8 +812,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* devpriv->I2Cards= IsBoardRevA ? 0xA8 : 0xA0; // Set I2C EEPROM */ /* DeviceType (0xA0) */ /* and DeviceAddress<<1. */ - - devpriv->I2CAdrs = 0xA0; /* I2C device address for onboard */ + /* I2C device address for onboard */ + devpriv->I2CAdrs = 0xA0; /* eeprom(revb) */ /* Issue an I2C ABORT command to halt any I2C operation in */ @@ -828,7 +831,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it) for (i = 0; i < 2; i++) { WR7146(P_I2CSTAT, I2C_CLKSEL); /* Write I2C control: reset error flags. */ - MC_ENABLE(P_MC2, MC2_UPLD_IIC); /* Invoke command upload */ + /* Invoke command upload */ + MC_ENABLE(P_MC2, MC2_UPLD_IIC); while (!MC_TEST(P_MC2, MC2_UPLD_IIC)) ; /* and wait for upload to complete. */ -- 1.6.5.2