From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Greg KH <greg@kroah.com>, Grant Likely <grant@secretlab.ca>,
Jean Delvare <khali@linux-fr.org>,
Ben Dooks <ben-linux@fluff.org>
Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>, Samuel Oritz <sameo@linux.intel.com>,
linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 4/4] regulator: Convert tps65023 to use regmap API
Date: Fri, 15 Jul 2011 15:23:12 +0900 [thread overview]
Message-ID: <1310710992-24462-4-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1310710992-24462-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
---
drivers/regulator/Kconfig | 1 +
drivers/regulator/tps65023-regulator.c | 98 +++++++++-----------------------
2 files changed, 28 insertions(+), 71 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index d7ed20f..c8dc5f0 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -235,6 +235,7 @@ config REGULATOR_TPS6105X
config REGULATOR_TPS65023
tristate "TI TPS65023 Power regulators"
depends on I2C
+ select REGMAP
help
This driver supports TPS65023 voltage regulator chips. TPS65023 provides
three step-down converters and two general-purpose LDO voltage regulators.
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index fbddc15..3fa3ba5 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -25,6 +25,7 @@
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/regmap.h>
/* Register definitions */
#define TPS65023_REG_VERSION 0
@@ -125,93 +126,35 @@ struct tps_pmic {
struct i2c_client *client;
struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
const struct tps_info *info[TPS65023_NUM_REGULATOR];
- struct mutex io_lock;
+ struct regmap *regmap;
};
-static inline int tps_65023_read(struct tps_pmic *tps, u8 reg)
-{
- return i2c_smbus_read_byte_data(tps->client, reg);
-}
-
-static inline int tps_65023_write(struct tps_pmic *tps, u8 reg, u8 val)
-{
- return i2c_smbus_write_byte_data(tps->client, reg, val);
-}
-
static int tps_65023_set_bits(struct tps_pmic *tps, u8 reg, u8 mask)
{
- int err, data;
-
- mutex_lock(&tps->io_lock);
-
- data = tps_65023_read(tps, reg);
- if (data < 0) {
- dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
- err = data;
- goto out;
- }
-
- data |= mask;
- err = tps_65023_write(tps, reg, data);
- if (err)
- dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
-
-out:
- mutex_unlock(&tps->io_lock);
- return err;
+ return regmap_update_bits(tps->regmap, reg, mask, mask);
}
static int tps_65023_clear_bits(struct tps_pmic *tps, u8 reg, u8 mask)
{
- int err, data;
-
- mutex_lock(&tps->io_lock);
-
- data = tps_65023_read(tps, reg);
- if (data < 0) {
- dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
- err = data;
- goto out;
- }
-
- data &= ~mask;
-
- err = tps_65023_write(tps, reg, data);
- if (err)
- dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
-
-out:
- mutex_unlock(&tps->io_lock);
- return err;
-
+ return regmap_update_bits(tps->regmap, reg, mask, 0);
}
static int tps_65023_reg_read(struct tps_pmic *tps, u8 reg)
{
- int data;
+ unsigned int val;
+ int ret;
- mutex_lock(&tps->io_lock);
+ ret = regmap_read(tps->regmap, reg, &val);
- data = tps_65023_read(tps, reg);
- if (data < 0)
- dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
-
- mutex_unlock(&tps->io_lock);
- return data;
+ if (ret != 0)
+ return ret;
+ else
+ return val;
}
static int tps_65023_reg_write(struct tps_pmic *tps, u8 reg, u8 val)
{
- int err;
-
- mutex_lock(&tps->io_lock);
-
- err = tps_65023_write(tps, reg, val);
- if (err < 0)
- dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
-
- mutex_unlock(&tps->io_lock);
- return err;
+ return regmap_write(tps->regmap, reg, val);
}
static int tps65023_dcdc_is_enabled(struct regulator_dev *dev)
@@ -463,6 +406,10 @@ static struct regulator_ops tps65023_ldo_ops = {
.list_voltage = tps65023_ldo_list_voltage,
};
+static struct regmap_config tps65023_regmap_config = {
+ .reg_bits = 8, .val_bits = 8,
+};
+
static int __devinit tps_65023_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -488,7 +435,13 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
if (!tps)
return -ENOMEM;
- mutex_init(&tps->io_lock);
+ tps->regmap = regmap_init(&client->dev, &tps65023_regmap_config);
+ if (IS_ERR(tps->regmap)) {
+ error = PTR_ERR(tps->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ error);
+ goto fail_alloc;
+ }
/* common for all regulators */
tps->client = client;
@@ -523,10 +476,12 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
return 0;
- fail:
+fail:
while (--i >= 0)
regulator_unregister(tps->rdev[i]);
+ regmap_exit(tps->regmap);
+fail_alloc:
kfree(tps);
return error;
}
@@ -545,6 +500,7 @@ static int __devexit tps_65023_remove(struct i2c_client *client)
for (i = 0; i < TPS65023_NUM_REGULATOR; i++)
regulator_unregister(tps->rdev[i]);
+ regmap_exit(tps->regmap);
kfree(tps);
return 0;
--
1.7.5.4
next prev parent reply other threads:[~2011-07-15 6:23 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-15 6:22 [PATCH 0/4] regmap: Generic I2C and SPI register map library Mark Brown
2011-07-15 6:23 ` [PATCH 1/4] regmap: Add generic non-memory mapped register access API Mark Brown
2011-07-15 6:23 ` [PATCH 2/4] regmap: Add I2C bus support Mark Brown
2011-07-15 6:23 ` [PATCH 3/4] regmap: Add SPI " Mark Brown
2011-07-15 6:23 ` Mark Brown [this message]
2011-07-15 10:31 ` [PATCH 4/4] regulator: Convert tps65023 to use regmap API Jean Delvare
2011-07-15 12:16 ` Mark Brown
2011-07-15 12:58 ` Jean Delvare
2011-07-15 13:10 ` Mark Brown
2011-07-15 13:17 ` Mark Brown
2011-07-17 15:53 ` Jean Delvare
2011-07-18 0:00 ` Grant Likely
2011-07-18 9:44 ` Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2011-07-18 10:04 [PATCH 0/4] regmap: Generic I2C and SPI register map library Mark Brown
2011-07-18 10:07 ` [PATCH 1/4] regmap: Add generic non-memory mapped register access API Mark Brown
2011-07-18 10:07 ` [PATCH 4/4] regulator: Convert tps65023 to use regmap API Mark Brown
2011-07-16 2:48 [PATCH 0/4] regmap: Generic I2C and SPI register map library Mark Brown
2011-07-16 2:48 ` [PATCH 1/4] regmap: Add generic non-memory mapped register access API Mark Brown
2011-07-16 2:48 ` [PATCH 4/4] regulator: Convert tps65023 to use regmap API Mark Brown
2011-07-09 4:49 [PATCH 0/4] regmap: Generic I2C and SPI register map library Mark Brown
2011-07-09 4:50 ` [PATCH 1/4] regmap: Add generic non-memory mapped register access API Mark Brown
2011-07-09 4:50 ` [PATCH 4/4] regulator: Convert tps65023 to use regmap API Mark Brown
2011-07-15 2:53 ` Grant Likely
2011-07-15 4:48 ` Mark Brown
2011-07-15 18:29 ` Grant Likely
2011-07-16 1:47 ` Mark Brown
2011-07-16 2:06 ` Grant Likely
2011-07-16 2:13 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310710992-24462-4-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=ben-linux@fluff.org \
--cc=dp@opensource.wolfsonmicro.com \
--cc=grant@secretlab.ca \
--cc=greg@kroah.com \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome