From: Keith Packard <keithp@keithp.com>
To: Dave Airlie <airlied@redhat.com>
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
intel-gfx@lists.freedesktop.org,
Keith Packard <keithp@keithp.com>
Subject: [PATCH 1/5] drm/i915: Use dp_detect_common in hotplug helper function
Date: Mon, 25 Jul 2011 23:36:30 -0700 [thread overview]
Message-ID: <1311662194-4050-2-git-send-email-keithp@keithp.com> (raw)
In-Reply-To: <1311662194-4050-1-git-send-email-keithp@keithp.com>
This uses the common dpcd reading routine, i915_dp_detect_common,
instead of open-coding a call to intel_dp_aux_native_read. Besides
reducing duplicated code, this also gains the read retries which
may be necessary when a cable is first plugged back in and the link
needs to be retrained.
Signed-off-by: Keith Packard <keithp@keithp.com>
---
drivers/gpu/drm/i915/intel_dp.c | 39 +++++++++++++++++++--------------------
1 files changed, 19 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index dcc7ae6..45db810 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1567,6 +1567,20 @@ intel_dp_link_down(struct intel_dp *intel_dp)
POSTING_READ(intel_dp->output_reg);
}
+static enum drm_connector_status
+i915_dp_detect_common(struct intel_dp *intel_dp)
+{
+ enum drm_connector_status status = connector_status_disconnected;
+
+ if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
+ sizeof (intel_dp->dpcd)) &&
+ (intel_dp->dpcd[DP_DPCD_REV] != 0)) {
+ status = connector_status_connected;
+ }
+
+ return status;
+}
+
/*
* According to DP spec
* 5.1.2:
@@ -1579,45 +1593,30 @@ intel_dp_link_down(struct intel_dp *intel_dp)
static void
intel_dp_check_link_status(struct intel_dp *intel_dp)
{
- int ret;
-
if (!intel_dp->base.base.crtc)
return;
+ /* Try to read receiver status if the link appears to be up */
if (!intel_dp_get_link_status(intel_dp)) {
intel_dp_link_down(intel_dp);
return;
}
- /* Try to read receiver status if the link appears to be up */
- ret = intel_dp_aux_native_read(intel_dp,
- 0x000, intel_dp->dpcd,
- sizeof (intel_dp->dpcd));
- if (ret != sizeof(intel_dp->dpcd)) {
+ /* Now read the DPCD to see if it's actually running */
+ if (i915_dp_detect_common(intel_dp) != connector_status_connected) {
intel_dp_link_down(intel_dp);
return;
}
if (!intel_channel_eq_ok(intel_dp)) {
+ DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
+ drm_get_encoder_name(&intel_dp->base.base));
intel_dp_start_link_train(intel_dp);
intel_dp_complete_link_train(intel_dp);
}
}
static enum drm_connector_status
-i915_dp_detect_common(struct intel_dp *intel_dp)
-{
- enum drm_connector_status status = connector_status_disconnected;
-
- if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
- sizeof (intel_dp->dpcd)) &&
- (intel_dp->dpcd[DP_DPCD_REV] != 0))
- status = connector_status_connected;
-
- return status;
-}
-
-static enum drm_connector_status
ironlake_dp_detect(struct intel_dp *intel_dp)
{
enum drm_connector_status status;
--
1.7.5.4
next prev parent reply other threads:[~2011-07-26 6:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-26 6:36 drm/i915: A selection of display port fixes Keith Packard
2011-07-26 6:36 ` Keith Packard [this message]
2011-07-26 16:36 ` [Intel-gfx] [PATCH 1/5] drm/i915: Use dp_detect_common in hotplug helper function Jesse Barnes
2011-07-26 6:36 ` [PATCH 2/5] drm/i915: Rename i915_dp_detect_common to intel_dp_get_dpcd Keith Packard
2011-07-26 16:37 ` [Intel-gfx] " Jesse Barnes
2011-07-26 6:36 ` [PATCH 3/5] drm/i915: In intel_dp_init, replace read of DPCD with intel_dp_get_dpcd Keith Packard
2011-07-26 16:38 ` [Intel-gfx] " Jesse Barnes
2011-07-26 6:36 ` [PATCH 4/5] drm/i915: Delay 250ms before running the hotplug code Keith Packard
2011-07-26 7:44 ` Daniel Vetter
2011-07-26 15:24 ` Keith Packard
2011-07-26 6:36 ` [PATCH 5/5] drm/i915: DP_PIPE_ENABLED must check transcoder on CPT Keith Packard
2011-07-26 16:46 ` [Intel-gfx] " Jesse Barnes
2011-07-26 18:48 ` [Intel-gfx] drm/i915: A selection of display port fixes Adam Jackson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311662194-4050-2-git-send-email-keithp@keithp.com \
--to=keithp@keithp.com \
--cc=airlied@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®