mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
To: Grant Likely <grant.likely@secretlab.ca>,
	linux-kernel@vger.kernel.org,
	alexander.stein@systec-electronic.com
Cc: qi.wang@intel.com, yong.y.wang@intel.com, joel.clark@intel.com,
	kok.howg.ewe@intel.com, toshiharu-linux@dsn.okisemi.com,
	Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Subject: [PATCH 3/3] gpio-ml-ioh: Fix suspend/resume issue
Date: Fri,  5 Aug 2011 13:04:22 +0900	[thread overview]
Message-ID: <1312517062-5582-3-git-send-email-tomoya-linux@dsn.okisemi.com> (raw)
In-Reply-To: <1312517062-5582-1-git-send-email-tomoya-linux@dsn.okisemi.com>

Currently, some registers are not saved in case changing to suspend state.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
---
 drivers/gpio/gpio-ml-ioh.c |   60 +++++++++++++++++++++++++++++++++++---------
 1 files changed, 48 insertions(+), 12 deletions(-)

diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 4fab37b..274fd4d 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -63,6 +63,7 @@ struct ioh_regs {
  * @pm_reg:	To store contents of PM register.
  * @im0_reg:	To store contents of interrupt mode regist0
  * @im1_reg:	To store contents of interrupt mode regist1
+ * @use_sel_reg: To store contents of GPIO_USE_SEL0~3
  */
 struct ioh_gpio_reg_data {
 	u32 ien_reg;
@@ -71,6 +72,7 @@ struct ioh_gpio_reg_data {
 	u32 pm_reg;
 	u32 im0_reg;
 	u32 im1_reg;
+	u32 use_sel_reg;
 };
 
 /**
@@ -81,6 +83,7 @@ struct ioh_gpio_reg_data {
  * @gpio:			Data for GPIO infrastructure.
  * @ioh_gpio_reg:		Memory mapped Register data is saved here
  *				when suspend.
+ * @gpio_use_sel:		Save GPIO_USE_SEL1~4 register for PM
  * @ch:				Indicate GPIO channel
  * @irq_base:		Save base of IRQ number for interrupt
  * @spinlock:		Used for register access protection in
@@ -92,6 +95,7 @@ struct ioh_gpio {
 	struct device *dev;
 	struct gpio_chip gpio;
 	struct ioh_gpio_reg_data ioh_gpio_reg;
+	u32 gpio_use_sel;
 	struct mutex lock;
 	int ch;
 	int irq_base;
@@ -169,12 +173,25 @@ static int ioh_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
  */
 static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
 {
-	chip->ioh_gpio_reg.po_reg = ioread32(&chip->reg->regs[chip->ch].po);
-	chip->ioh_gpio_reg.pm_reg = ioread32(&chip->reg->regs[chip->ch].pm);
-	chip->ioh_gpio_reg.ien_reg = ioread32(&chip->reg->regs[chip->ch].ien);
-	chip->ioh_gpio_reg.imask_reg = ioread32(&chip->reg->regs[chip->ch].imask);
-	chip->ioh_gpio_reg.im0_reg = ioread32(&chip->reg->regs[chip->ch].im_0);
-	chip->ioh_gpio_reg.im1_reg = ioread32(&chip->reg->regs[chip->ch].im_1);
+	int i;
+
+	for (i = 0; i < 8; i ++, chip++) {
+		chip->ioh_gpio_reg.po_reg =
+					ioread32(&chip->reg->regs[chip->ch].po);
+		chip->ioh_gpio_reg.pm_reg =
+					ioread32(&chip->reg->regs[chip->ch].pm);
+		chip->ioh_gpio_reg.ien_reg =
+				       ioread32(&chip->reg->regs[chip->ch].ien);
+		chip->ioh_gpio_reg.imask_reg =
+				     ioread32(&chip->reg->regs[chip->ch].imask);
+		chip->ioh_gpio_reg.im0_reg =
+				      ioread32(&chip->reg->regs[chip->ch].im_0);
+		chip->ioh_gpio_reg.im1_reg =
+				      ioread32(&chip->reg->regs[chip->ch].im_1);
+		if (i < 4)
+			chip->ioh_gpio_reg.use_sel_reg =
+					   ioread32(&chip->reg->ioh_sel_reg[i]);
+	}
 }
 
 /*
@@ -182,12 +199,25 @@ static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
  */
 static void ioh_gpio_restore_reg_conf(struct ioh_gpio *chip)
 {
-	iowrite32(chip->ioh_gpio_reg.po_reg, &chip->reg->regs[chip->ch].po);
-	iowrite32(chip->ioh_gpio_reg.pm_reg, &chip->reg->regs[chip->ch].pm);
-	iowrite32(chip->ioh_gpio_reg.ien_reg, &chip->reg->regs[chip->ch].ien);
-	iowrite32(chip->ioh_gpio_reg.imask_reg, &chip->reg->regs[chip->ch].imask);
-	iowrite32(chip->ioh_gpio_reg.im0_reg, &chip->reg->regs[chip->ch].im_0);
-	iowrite32(chip->ioh_gpio_reg.im1_reg, &chip->reg->regs[chip->ch].im_1);
+	int i;
+
+	for (i = 0; i < 8; i ++, chip++) {
+		iowrite32(chip->ioh_gpio_reg.po_reg,
+			  &chip->reg->regs[chip->ch].po);
+		iowrite32(chip->ioh_gpio_reg.pm_reg,
+			  &chip->reg->regs[chip->ch].pm);
+		iowrite32(chip->ioh_gpio_reg.ien_reg,
+			  &chip->reg->regs[chip->ch].ien);
+		iowrite32(chip->ioh_gpio_reg.imask_reg,
+			  &chip->reg->regs[chip->ch].imask);
+		iowrite32(chip->ioh_gpio_reg.im0_reg,
+			  &chip->reg->regs[chip->ch].im_0);
+		iowrite32(chip->ioh_gpio_reg.im1_reg,
+			  &chip->reg->regs[chip->ch].im_1);
+		if (i < 4)
+			iowrite32(chip->ioh_gpio_reg.use_sel_reg,
+				  &chip->reg->ioh_sel_reg[i]);
+	}
 }
 #endif
 
@@ -485,8 +515,11 @@ static int ioh_gpio_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	s32 ret;
 	struct ioh_gpio *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
 
+	spin_lock_irqsave(&chip->spinlock, flags);
 	ioh_gpio_save_reg_conf(chip);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	ret = pci_save_state(pdev);
 	if (ret) {
@@ -506,6 +539,7 @@ static int ioh_gpio_resume(struct pci_dev *pdev)
 {
 	s32 ret;
 	struct ioh_gpio *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
 
 	ret = pci_enable_wake(pdev, PCI_D0, 0);
 
@@ -517,9 +551,11 @@ static int ioh_gpio_resume(struct pci_dev *pdev)
 	}
 	pci_restore_state(pdev);
 
+	spin_lock_irqsave(&chip->spinlock, flags);
 	iowrite32(0x01, &chip->reg->srst);
 	iowrite32(0x00, &chip->reg->srst);
 	ioh_gpio_restore_reg_conf(chip);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	return 0;
 }
-- 
1.7.4.4


  parent reply	other threads:[~2011-08-05  4:05 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-05  4:04 [PATCH 1/3] gpio-ml-ioh: Delete unnecessary code Tomoya MORINAGA
2011-08-05  4:04 ` [PATCH 2/3] gpio-ml-ioh: Support interrupt function Tomoya MORINAGA
2011-08-05  4:04 ` Tomoya MORINAGA [this message]
2011-10-04 16:07   ` [PATCH 3/3] gpio-ml-ioh: Fix suspend/resume issue Grant Likely
2011-10-05  1:30     ` Tomoya MORINAGA
2011-10-05 17:52       ` Grant Likely
2011-10-06  0:40         ` Tomoya MORINAGA

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1312517062-5582-3-git-send-email-tomoya-linux@dsn.okisemi.com \
    --to=tomoya-linux@dsn.okisemi.com \
    --cc=alexander.stein@systec-electronic.com \
    --cc=grant.likely@secretlab.ca \
    --cc=joel.clark@intel.com \
    --cc=kok.howg.ewe@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=qi.wang@intel.com \
    --cc=toshiharu-linux@dsn.okisemi.com \
    --cc=yong.y.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®