mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stephen Warren <swarren@nvidia.com>
To: Ben Dooks <ben-linux@fluff.org>
Cc: Dilan Lee <dilee@nvidia.com>,
	linux-i2c@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org, Stephen Warren <swarren@nvidia.com>
Subject: [PATCH] i2c/tegra: I2C driver uses the suspend_noirq/resume_noirq
Date: Fri,  5 Aug 2011 17:15:02 -0600	[thread overview]
Message-ID: <1312586102-27907-1-git-send-email-swarren@nvidia.com> (raw)

From: Dilan Lee <dilee@nvidia.com>

We found the register settings of wm8903(an audio codec) can't be modified
in snd_soc_suspend since I2C bus has been suspended before snd_soc_suspend.

Pop noise will occur when system resume from LP0 if the register settings of wm8903
haven't be modified correctly in snd_soc_suspend.

So, we use the suspend_noirq/resume_noirq callbacks to make sure I2C bus still
operates while running snd_soc_suspend.

Signed-off-by: Dilan Lee <dilee@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
When applying this, you'll get a trivial merge conflict with the other
i2c-tegra.c patch I just reposted titled "i2c: Tegra: Add of_match_table".
Just add the two lines to tegra_i2c_driver.driver in whichever order you
prefer:-).

 drivers/i2c/busses/i2c-tegra.c |   19 +++++++++++++------
 1 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 0c6e840..3d2bf19 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -687,8 +687,9 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int tegra_i2c_suspend(struct platform_device *pdev, pm_message_t state)
+static int tegra_i2c_suspend_noirq(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
 	i2c_lock_adapter(&i2c_dev->adapter);
@@ -698,8 +699,9 @@ static int tegra_i2c_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int tegra_i2c_resume(struct platform_device *pdev)
+static int tegra_i2c_resume_noirq(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 	int ret;
 
@@ -718,18 +720,23 @@ static int tegra_i2c_resume(struct platform_device *pdev)
 
 	return 0;
 }
+
+static const struct dev_pm_ops tegra_i2c_dev_pm_ops = {
+	.suspend_noirq = tegra_i2c_suspend_noirq,
+	.resume_noirq = tegra_i2c_resume_noirq,
+};
+#define TEGRA_I2C_DEV_PM_OPS (&tegra_i2c_dev_pm_ops)
+#else
+#define TEGRA_I2C_DEV_PM_OPS NULL
 #endif
 
 static struct platform_driver tegra_i2c_driver = {
 	.probe   = tegra_i2c_probe,
 	.remove  = tegra_i2c_remove,
-#ifdef CONFIG_PM
-	.suspend = tegra_i2c_suspend,
-	.resume  = tegra_i2c_resume,
-#endif
 	.driver  = {
 		.name  = "tegra-i2c",
 		.owner = THIS_MODULE,
+		.pm    = TEGRA_I2C_DEV_PM_OPS,
 	},
 };
 
-- 
1.7.0.4


             reply	other threads:[~2011-08-05 23:15 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-05 23:15 Stephen Warren [this message]
2011-08-06  4:33 ` Colin Cross
2011-08-06  8:48   ` Mark Brown
2011-08-11 19:35     ` Stephen Warren
2011-08-11 20:51       ` Colin Cross
2011-08-11 21:09         ` Stephen Warren
2011-08-11 21:43           ` Colin Cross
2011-08-12  0:45             ` Mark Brown
2011-08-12  2:59               ` Colin Cross
2011-08-12  3:14                 ` Mark Brown
2011-08-24 21:28                   ` Stephen Warren
2011-08-24 21:33                     ` Colin Cross
2011-08-30 16:25                       ` Stephen Warren
2011-08-31 16:28                         ` Arnd Bergmann
2011-08-31 16:31                           ` Mark Brown
2011-09-20 16:51                         ` Stephen Warren
2011-09-22 15:28                           ` Arnd Bergmann
2011-08-25 10:36                     ` Mark Brown
2011-08-12  0:18           ` Mark Brown
2011-09-22 17:01 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1312586102-27907-1-git-send-email-swarren@nvidia.com \
    --to=swarren@nvidia.com \
    --cc=ben-linux@fluff.org \
    --cc=dilee@nvidia.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome