From: Leo Yan <leoy@marvell.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, hzhuang1@marvell.com,
nicolas.pitre@linaro.org, linux@arm.linux.org.uk,
plagnioj@jcrosoft.com
Cc: Leo Yan <leoy@marvell.com>
Subject: [PATCH 1/2] ARM: mmp: add sram allocator
Date: Thu, 11 Aug 2011 10:32:00 +0800 [thread overview]
Message-ID: <1313029921-32227-2-git-send-email-leoy@marvell.com> (raw)
In-Reply-To: <1313029921-32227-1-git-send-email-leoy@marvell.com>
On mmp platform, there have serveral sram banks;
these banks are mainly for audio, video and PM.
So add the sram allocator using genalloc to manage them.
Every sram bank will register its own platform device
info, after the sram allocator create the generic pool
for the sram bank, the user module can use the pool's
name to get the pool handler; then it can use the handler
to alloc/free memory with genalloc APIs.
Signed-off-by: Leo Yan <leoy@marvell.com>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-mmp/Makefile | 2 +-
arch/arm/mach-mmp/include/mach/sram.h | 35 +++++++
arch/arm/mach-mmp/sram.c | 168 +++++++++++++++++++++++++++++++++
4 files changed, 205 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-mmp/include/mach/sram.h
create mode 100644 arch/arm/mach-mmp/sram.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2c71a8f..c7545d1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -559,6 +559,7 @@ config ARCH_MMP
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
+ select GENERIC_ALLOCATOR
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index b0ac942..169c674 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -7,7 +7,7 @@ obj-y += common.o clock.o devices.o time.o
# SoC support
obj-$(CONFIG_CPU_PXA168) += pxa168.o irq-pxa168.o
obj-$(CONFIG_CPU_PXA910) += pxa910.o irq-pxa168.o
-obj-$(CONFIG_CPU_MMP2) += mmp2.o irq-mmp2.o
+obj-$(CONFIG_CPU_MMP2) += mmp2.o irq-mmp2.o sram.o
# board support
obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
diff --git a/arch/arm/mach-mmp/include/mach/sram.h b/arch/arm/mach-mmp/include/mach/sram.h
new file mode 100644
index 0000000..bedd2c4
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/sram.h
@@ -0,0 +1,35 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/sram.h
+ *
+ * SRAM Memory Management
+ *
+ * Copyright (c) 2011 Marvell Semiconductors Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_SRAM_H
+#define __ASM_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY 512
+
+enum sram_type {
+ MMP_DMA_UNDEFINED = 0,
+ MMP_ASRAM,
+ MMP_VSRAM,
+};
+
+struct sram_platdata {
+ char *pool_name;
+ int granularity;
+};
+
+extern struct gen_pool *sram_get_gpool(char *pool_name);
+
+#endif /* __ASM_ARCH_SRAM_H */
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
new file mode 100644
index 0000000..19ba19e
--- /dev/null
+++ b/arch/arm/mach-mmp/sram.c
@@ -0,0 +1,168 @@
+/*
+ * linux/arch/arm/mach-mmp/sram.c
+ *
+ * based on mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (c) 2011 Marvell Semiconductors Inc.
+ * All Rights Reserved
+ *
+ * Add for mmp sram support - Leo Yan <leoy@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/genalloc.h>
+
+#include <mach/sram.h>
+
+struct sram_bank_info {
+ char *pool_name;
+ struct gen_pool *gpool;
+ int granularity;
+
+ phys_addr_t sram_phys;
+ void __iomem *sram_virt;
+ u32 sram_size;
+
+ struct list_head node;
+};
+
+static DEFINE_MUTEX(sram_lock);
+static LIST_HEAD(sram_bank_list);
+
+struct gen_pool *sram_get_gpool(char *pool_name)
+{
+ struct sram_bank_info *info = NULL;
+
+ if (!pool_name)
+ return NULL;
+
+ mutex_lock(&sram_lock);
+
+ list_for_each_entry(info, &sram_bank_list, node)
+ if (!strcmp(pool_name, info->pool_name))
+ break;
+
+ mutex_unlock(&sram_lock);
+
+ if (&info->node == &sram_bank_list)
+ return NULL;
+
+ return info->gpool;
+}
+EXPORT_SYMBOL(sram_get_gpool);
+
+static int __devinit sram_probe(struct platform_device *pdev)
+{
+ struct sram_platdata *pdata = pdev->dev.platform_data;
+ struct sram_bank_info *info;
+ struct resource *res;
+ int ret = 0;
+
+ if (!pdata && !pdata->pool_name)
+ return -ENODEV;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (!resource_size(res))
+ return 0;
+
+ info->sram_phys = (phys_addr_t)res->start;
+ info->sram_size = resource_size(res);
+ info->sram_virt = ioremap(info->sram_phys, info->sram_size);
+ info->pool_name = kstrdup(pdata->pool_name, GFP_KERNEL);
+ info->granularity = pdata->granularity;
+
+ info->gpool = gen_pool_create(ilog2(info->granularity), -1);
+ if (!info->gpool) {
+ dev_err(&pdev->dev, "create pool failed\n");
+ ret = -ENOMEM;
+ goto create_pool_err;
+ }
+
+ ret = gen_pool_add_virt(info->gpool, (unsigned long)info->sram_virt,
+ info->sram_phys, info->sram_size, -1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "add new chunk failed\n");
+ ret = -ENOMEM;
+ goto add_chunk_err;
+ }
+
+ mutex_lock(&sram_lock);
+ list_add(&info->node, &sram_bank_list);
+ mutex_unlock(&sram_lock);
+
+ platform_set_drvdata(pdev, info);
+
+ dev_info(&pdev->dev, "initialized\n");
+ return 0;
+
+add_chunk_err:
+ gen_pool_destroy(info->gpool);
+create_pool_err:
+ iounmap(info->sram_virt);
+ kfree(info->pool_name);
+out:
+ kfree(info);
+ return ret;
+}
+
+static int __devexit sram_remove(struct platform_device *pdev)
+{
+ struct sram_bank_info *info;
+
+ info = platform_get_drvdata(pdev);
+ if (info == NULL)
+ return -ENODEV;
+
+ mutex_lock(&sram_lock);
+ list_del(&info->node);
+ mutex_unlock(&sram_lock);
+
+ gen_pool_destroy(info->gpool);
+ iounmap(info->sram_virt);
+ kfree(info->pool_name);
+ kfree(info);
+ return 0;
+}
+
+static const struct platform_device_id sram_id_table[] = {
+ { "asram", MMP_ASRAM },
+ { "vsram", MMP_VSRAM },
+ { }
+};
+
+static struct platform_driver sram_driver = {
+ .probe = sram_probe,
+ .remove = sram_remove,
+ .driver = {
+ .name = "mmp-sram",
+ },
+ .id_table = sram_id_table,
+};
+
+static int __init sram_init(void)
+{
+ return platform_driver_register(&sram_driver);
+}
+core_initcall(sram_init);
+
+MODULE_LICENSE("GPL");
--
1.7.4.1
next prev parent reply other threads:[~2011-08-11 2:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-11 2:31 [PATCH V3 0/2] ARM: mmp: add audio sram support Leo Yan
2011-08-11 2:32 ` Leo Yan [this message]
2011-08-11 2:32 ` [PATCH 2/2] ARM: mmp: register audio sram bank Leo Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313029921-32227-2-git-send-email-leoy@marvell.com \
--to=leoy@marvell.com \
--cc=hzhuang1@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=nicolas.pitre@linaro.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®