[PATCH] mach-ixp4xx: made gpio functions atomic

[Frans Meulenbroeks <fransmeulenbroeks@gmail.com>]

gpio_line_set and gpio_line config on ixp4xx were not atomic
This patch fixes this by surrounding them with local_irq_save and
local_irq_restore calls, similar to the way Lennert Buytenhek
implemented this for iop. (see arch/arm/plat-iop/gpio.c)

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
---

Note: an alternative solution would be to use the set_bit and 
clear_bit atomic functions, but I felt it better to do things
the same way as Lennert did. Also it could be that this is a few
bytes smaller. Didn't check that.

PS: please Cc me as I am not on the list

--- git/arch/arm/mach-ixp4xx/include/mach/platform.h.orig	2011-08-09 19:16:52.645482269 +0200
+++ git/arch/arm/mach-ixp4xx/include/mach/platform.h	2011-08-09 19:17:39.915482235 +0200
@@ -14,6 +14,8 @@
 #ifndef __ASSEMBLY__
 
 #include <asm/types.h>
+#include <asm/system.h>
+#include <linux/kernel.h>
 
 #ifndef	__ARMEB__
 #define	REG_OFFSET	0
@@ -150,10 +152,14 @@
 
 static inline void gpio_line_config(u8 line, u32 direction)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	if (direction == IXP4XX_GPIO_IN)
 		*IXP4XX_GPIO_GPOER |= (1 << line);
 	else
 		*IXP4XX_GPIO_GPOER &= ~(1 << line);
+	local_irq_restore(flags);
 }
 
 static inline void gpio_line_get(u8 line, int *value)
@@ -163,10 +169,14 @@
 
 static inline void gpio_line_set(u8 line, int value)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	if (value == IXP4XX_GPIO_HIGH)
 	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
 	else if (value == IXP4XX_GPIO_LOW)
 	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+	local_irq_restore(flags);
 }
 
 #endif // __ASSEMBLY__