From: Ravishankar <ravishankarkm32@gmail.com>
To: gregkh@suse.de, wfp5p@virginia.edu
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Ravishankar <ravi.shankar@greenturtles.in>,
Ravishankar <ravishankarkm32@gmail.com>
Subject: [PATCH] Staging: comedi: fix printk issue in cb_pcidas64.c
Date: Fri, 12 Aug 2011 13:07:07 +0530 [thread overview]
Message-ID: <1313134627-4781-1-git-send-email-ravishankarkm32@gmail.com> (raw)
In-Reply-To: <[PATCH]Staging: comedi: fix warning issue in cb_pcidas64.c>
From: Ravishankar <ravi.shankar@greenturtles.in>
This is a patch to the cb_pcidas64.c file that fixes up a printk warning found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
---
drivers/staging/comedi/drivers/cb_pcidas64.c | 27 ++++++++++++-------------
1 files changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 1e32419..915f60a 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1739,7 +1739,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
uint32_t local_range, local_decode;
int retval;
- printk("comedi%d: cb_pcidas64\n", dev->minor);
+ printk(KERN_INFO "comedi%d: cb_pcidas64\n", dev->minor);
/*
* Allocate the private structure area.
@@ -1776,17 +1776,16 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
}
if (dev->board_ptr == NULL) {
- printk
- ("No supported ComputerBoards/MeasurementComputing card found\n");
+ printk(KERN_WARNING "No supported"
+ " ComputerBoards/MeasurementComputing card found\n");
return -EIO;
}
- printk("Found %s on bus %i, slot %i\n", board(dev)->name,
- pcidev->bus->number, PCI_SLOT(pcidev->devfn));
+ printk(KERN_DEBUG "Found %s on bus %i, slot %i\n", board(dev)->name,
+ pcidev->bus->number, PCI_SLOT(pcidev->devfn));
if (comedi_pci_enable(pcidev, driver_cb_pcidas.driver_name)) {
- printk(KERN_WARNING
- " failed to enable PCI device and request regions\n");
+ printk(KERN_WARNING " failed to enable PCI device and request regions\n");
return -EIO;
}
pci_set_master(pcidev);
@@ -1814,7 +1813,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (!priv(dev)->plx9080_iobase || !priv(dev)->main_iobase
|| !priv(dev)->dio_counter_iobase) {
- printk(" failed to remap io memory\n");
+ printk(KERN_WARNING " failed to remap io memory\n");
return -ENOMEM;
}
@@ -1850,17 +1849,17 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
priv(dev)->hw_revision =
hw_revision(dev, readw(priv(dev)->main_iobase + HW_STATUS_REG));
- printk(" stc hardware revision %i\n", priv(dev)->hw_revision);
+ printk(KERN_DEBUG " stc hardware revision %i\n", priv(dev)->hw_revision);
init_plx9080(dev);
init_stc_registers(dev);
/* get irq */
if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
"cb_pcidas64", dev)) {
- printk(" unable to allocate irq %u\n", pcidev->irq);
+ printk(KERN_WARNING " unable to allocate irq %u\n", pcidev->irq);
return -EINVAL;
}
dev->irq = pcidev->irq;
- printk(" irq %u\n", dev->irq);
+ printk(KERN_DEBUG " irq %u\n", dev->irq);
retval = setup_subdevices(dev);
if (retval < 0)
@@ -1882,7 +1881,7 @@ static int detach(struct comedi_device *dev)
{
unsigned int i;
- printk("comedi%d: cb_pcidas: remove\n", dev->minor);
+ printk(KERN_INFO "comedi%d: cb_pcidas: remove\n", dev->minor);
if (dev->irq)
free_irq(dev->irq, dev);
@@ -2067,7 +2066,7 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
DEBUG_PRINT(" looped %i times waiting for data\n", i);
if (i == timeout) {
comedi_error(dev, " analog input read insn timed out");
- printk(" status 0x%x\n", bits);
+ printk(KERN_DEBUG " status 0x%x\n", bits);
return -ETIME;
}
if (board(dev)->layout == LAYOUT_4020)
@@ -2093,7 +2092,7 @@ static int ai_config_calibration_source(struct comedi_device *dev,
else
num_calibration_sources = 8;
if (source >= num_calibration_sources) {
- printk("invalid calibration source: %i\n", source);
+ printk(KERN_WARNING "invalid calibration source: %i\n", source);
return -EINVAL;
}
--
1.6.5.2
parent reply other threads:[~2011-08-12 7:37 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <[PATCH]Staging: comedi: fix warning issue in cb_pcidas64.c>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313134627-4781-1-git-send-email-ravishankarkm32@gmail.com \
--to=ravishankarkm32@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=ravi.shankar@greenturtles.in \
--cc=wfp5p@virginia.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®