From: "Koul, Vinod" <vinod.koul@intel.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Jassi Brar <jaswinder.singh@linaro.org>,
sundaram@ti.com, dan.j.williams@intel.com,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
rmk+kernel@arm.linux.org.uk, nsekhar@ti.com
Subject: Re: [PATCH] DMAEngine: Define generic transfer request api
Date: Fri, 19 Aug 2011 19:13:24 +0530 [thread overview]
Message-ID: <1313761404.18591.1.camel@vkoul-udesk3> (raw)
In-Reply-To: <CACRpkdaY_wuz+zS-iKCPT-M7EpvtxCNX+OJ6NROSaQtZ6XoNMg@mail.gmail.com>
On Tue, 2011-08-16 at 15:06 +0200, Linus Walleij wrote:
> On Tue, Aug 16, 2011 at 2:56 PM, Koul, Vinod <vinod.koul@intel.com> wrote:
>
> > Currently we have two approaches to solve this problem first being the
> > DMA_STRIDE_CONFIG proposed by Linus W, I feel this one is better
> > approach as this can give client ability to configure each transfer
> > rather than set for the channel. Linus W, do you agree?
>
> I think Sundaram is in the position of doing some heavy work on
> using one or the other of the API:s, and I think he is better
> suited than anyone else of us to select what scheme to use,
> in the end he's going to write the first code using the API.
And Unfortunately TI folks don't seem to care about this discussion :(
Haven't seen anything on this from them, or on previous RFC by Jassi
--
~Vinod
next prev parent reply other threads:[~2011-08-19 13:43 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-12 11:14 Jassi Brar
2011-08-16 12:56 ` Koul, Vinod
2011-08-16 13:06 ` Linus Walleij
2011-08-19 13:43 ` Koul, Vinod [this message]
2011-08-19 14:19 ` Linus Walleij
2011-08-19 15:46 ` Jassi Brar
2011-08-19 17:28 ` Koul, Vinod
2011-08-19 18:45 ` Jassi Brar
2011-08-23 14:43 ` Matt Porter
2011-08-16 14:32 ` Jassi Brar
2011-09-15 7:46 ` [PATCHv2] " Jassi Brar
2011-09-15 8:22 ` Russell King
2011-09-15 10:02 ` Jassi Brar
2011-09-16 7:17 ` Barry Song
2011-09-16 11:03 ` Jassi Brar
2011-09-16 9:07 ` Vinod Koul
2011-09-16 12:30 ` Jassi Brar
2011-09-16 17:06 ` Vinod Koul
2011-09-16 17:51 ` Jassi Brar
2011-09-19 3:23 ` Vinod Koul
2011-09-20 12:12 ` [PATCHv3] DMAEngine: Define interleaved " Jassi Brar
2011-09-20 16:52 ` Vinod Koul
2011-09-20 18:08 ` Jassi Brar
2011-09-21 6:32 ` Vinod Koul
2011-09-21 6:45 ` Jassi Brar
2011-09-21 6:51 ` Vinod Koul
2011-09-21 7:31 ` Jassi Brar
2011-09-21 10:18 ` Russell King
2011-09-21 15:21 ` Jassi Brar
2011-09-28 6:39 ` [PATCHv4] " Jassi Brar
2011-09-28 9:03 ` Vinod Koul
2011-09-28 15:15 ` Jassi Brar
2011-09-29 11:17 ` Vinod Koul
2011-09-30 6:43 ` Barry Song
2011-09-30 16:01 ` Jassi Brar
2011-10-01 3:05 ` Barry Song
2011-10-01 18:11 ` Vinod Koul
2011-10-01 18:45 ` Jassi Brar
2011-10-01 18:41 ` Jassi Brar
2011-10-01 18:48 ` Jassi Brar
2011-10-02 0:33 ` Barry Song
2011-10-03 6:24 ` Jassi Brar
2011-10-03 16:13 ` Russell King
2011-10-03 16:19 ` Jassi Brar
2011-10-03 17:15 ` Williams, Dan J
2011-10-03 18:23 ` Jassi Brar
2011-10-05 18:19 ` Williams, Dan J
2011-10-06 9:06 ` Jassi Brar
2011-10-05 18:14 ` Williams, Dan J
2011-10-06 7:12 ` Jassi Brar
2011-10-07 5:45 ` Vinod Koul
2011-10-07 11:27 ` Jassi Brar
2011-10-07 14:19 ` Vinod Koul
2011-10-07 14:38 ` Jassi Brar
2011-10-10 6:53 ` Vinod Koul
2011-10-10 9:16 ` Jassi Brar
2011-10-10 9:18 ` Vinod Koul
2011-10-10 9:53 ` Jassi Brar
2011-10-10 10:45 ` Vinod Koul
2011-10-10 11:16 ` Jassi Brar
2011-10-10 16:02 ` Vinod Koul
2011-10-10 16:28 ` Jassi Brar
2011-10-11 11:56 ` Vinod Koul
2011-10-11 15:57 ` Jassi Brar
2011-10-11 16:45 ` Vinod Koul
2011-10-12 5:41 ` Barry Song
2011-10-12 6:19 ` Vinod Koul
2011-10-12 6:30 ` Jassi Brar
2011-10-12 6:53 ` Barry Song
2011-10-11 16:44 ` Williams, Dan J
2011-10-11 18:42 ` Jassi Brar
2011-10-14 18:11 ` Bounine, Alexandre
2011-10-14 17:50 ` Bounine, Alexandre
2011-10-14 18:36 ` Jassi Brar
2011-10-14 19:15 ` Bounine, Alexandre
2011-10-15 11:25 ` Jassi Brar
2011-10-17 14:07 ` Bounine, Alexandre
2011-10-17 15:16 ` Jassi Brar
2011-10-17 18:00 ` Bounine, Alexandre
2011-10-17 19:29 ` Jassi Brar
2011-10-17 21:07 ` Bounine, Alexandre
2011-10-18 5:45 ` Jassi Brar
2011-10-18 7:42 ` Russell King
2011-10-18 8:30 ` Jassi Brar
2011-10-18 8:26 ` Vinod Koul
2011-10-18 8:37 ` Jassi Brar
2011-10-18 14:44 ` Bounine, Alexandre
2011-10-18 9:49 ` Russell King
2011-10-18 11:50 ` Jassi Brar
2011-10-18 11:59 ` Russell King
2011-10-18 17:57 ` Bounine, Alexandre
2011-10-24 3:49 ` Vinod Koul
2011-10-24 12:36 ` Bounine, Alexandre
2011-10-24 15:27 ` Vinod Koul
2011-10-18 17:26 ` Bounine, Alexandre
2011-10-18 17:35 ` Russell King
2011-10-18 17:53 ` Jassi Brar
2011-10-18 13:51 ` Bounine, Alexandre
2011-10-18 14:54 ` Jassi Brar
2011-10-18 15:15 ` Bounine, Alexandre
2011-09-30 15:47 ` Jassi Brar
2011-10-13 7:03 ` [PATCHv5] " Jassi Brar
2011-10-14 7:32 ` Barry Song
2011-10-14 11:51 ` Jassi Brar
2011-10-14 13:31 ` Vinod Koul
2011-10-14 13:51 ` Jassi Brar
2011-10-14 14:05 ` Vinod Koul
2011-10-14 14:18 ` Vinod Koul
2011-10-14 14:55 ` Barry Song
2011-10-14 15:06 ` Vinod Koul
2011-10-14 15:38 ` Barry Song
2011-10-14 16:09 ` Vinod Koul
2011-10-14 16:35 ` Jassi Brar
2011-10-14 17:04 ` Vinod Koul
2011-10-14 17:59 ` Jassi Brar
2011-10-15 17:11 ` Vinod Koul
2011-10-14 15:16 ` Vinod Koul
2011-10-14 15:50 ` Barry Song
2011-10-16 11:16 ` Jassi Brar
2011-10-16 12:16 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313761404.18591.1.camel@vkoul-udesk3 \
--to=vinod.koul@intel.com \
--cc=dan.j.williams@intel.com \
--cc=jaswinder.singh@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=sundaram@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®