From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754499Ab1HZBBf (ORCPT ); Thu, 25 Aug 2011 21:01:35 -0400 Received: from emcscan.emc.com.tw ([192.72.220.5]:18560 "EHLO emcscan.emc.com.tw" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754398Ab1HZBBd (ORCPT ); Thu, 25 Aug 2011 21:01:33 -0400 From: JJ Ding To: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Seth Forshee , Dmitry Torokhov , Aaron Huang , Tom Lin , =?UTF-8?q?=C3=89ric=20Piel?= , Daniel Kurtz , Chase Douglas , Henrik Rydberg , Alessandro Rubini , JJ Ding Subject: [PATCH v3 0/7] Input: elantech: add support for newer hardware Date: Fri, 26 Aug 2011 09:03:04 +0800 Message-Id: <1314320591-11551-1-git-send-email-jj_ding@emc.com.tw> X-Mailer: git-send-email 1.7.4.1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Lists, This is a series of patches to add support for newer generation of ELAN touchpad. Patches #1~#6 are essentially fixes and cleanups that pave the way for patch #7, which really adds code for v3 hardware. Any comments, suggestoins are welcome. Thank you. Changes since v1: - drop EC workaround patch. - add patch #2, make ST and MT have the same range, as Dmitry suggested. - add patch #4, remove ETP_EDGE_FUZZ_V2, as Éric suggested. - rename all packet checking functions so they are consistent. - some code cleanup, and don't report ABS_[XY] when fingers == 0, as Seth suggested. - add document for v3 debounce, and now check debounce in elantech_packet_check_v3. Changes since v2: - fix v3 hardware packet checking (reported by Seth and fix by Dmitry.) JJ Ding (7): Input: elantech - correct x, y value range for v2 hardware Input: elantech - get rid of ETP_2FT_* in elantech.h Input: elantech - use firmware provided x, y ranges Input: elantech - remove ETP_EDGE_FUZZ_V2 Input: elantech - packet checking for v2 hardware Input: elantech - clean up elantech_init Input: elantech - add v3 hardware support Documentation/input/elantech.txt | 125 +++++++++++-- drivers/input/mouse/elantech.c | 385 +++++++++++++++++++++++++++++++------- drivers/input/mouse/elantech.h | 35 ++-- 3 files changed, 442 insertions(+), 103 deletions(-) -- 1.7.4.1