From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752900Ab1IFGZi (ORCPT ); Tue, 6 Sep 2011 02:25:38 -0400 Received: from mail-wy0-f174.google.com ([74.125.82.174]:47598 "EHLO mail-wy0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752730Ab1IFGZW (ORCPT ); Tue, 6 Sep 2011 02:25:22 -0400 Subject: Re: linux-3.1-0-rc4 bus error ... MPS configured higher than maximum supported by the device. If a bus issue occurs, try running with pci=pcie_bus_safe. From: Eric Dumazet To: Jeff Chua Cc: lkml , Jordan_Hargrave@dell.com, Jon Mason , Jesse Barnes , Linus Torvalds In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Date: Tue, 06 Sep 2011 08:25:13 +0200 Message-ID: <1315290313.2565.0.camel@edumazet-laptop> Mime-Version: 1.0 X-Mailer: Evolution 2.32.2 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Le mardi 06 septembre 2011 à 14:09 +0800, Jeff Chua a écrit : > On Mon, Sep 5, 2011 at 10:55 PM, Jeff Chua wrote: > > Got the following error after upgrading from linux-2.6.36 to > > linux-3.1.0-rc4 on a Dell PowerEdge 2950 that has a PCIe fax card, and > > the system LED panel shows "Bus Fatal Error". > > > > > > Is is normal or should I try out "pci=pcie_bus_safe" or "pci=pci" as > > suggested in the dmesg? > > > > There was another error that also showed up on 2.6.36 but I'm ignoring > > that for now ( ... disabling ASPM on pre-1.1 PCIe device. You can > > enable it with 'pcie_aspm=force') > > > > pci 0000:07:00.0: Dev MPS 128 MPSS 256 MRRS 4096 > > pci 0000:07:00.0: Dev MPS 256 MPSS 256 MRRS 128 > > pci 0000:08:00.0: Dev MPS 128 MPSS 128 MRRS 128 > > pci 0000:08:00.0: MPS configured higher than maximum supported by the > > device. If a bus issue occurs, try running with pci=pcie_bus_safe. > > pci 0000:08:00.0: Dev MPS 256 MPSS 256 MRRS 128 > > Uhhuh. NMI received for unknown reason 31 on CPU 0. > > Do you have a strange power saving mode enabled? > > Dazed and confused, but trying to continue > > pci 0000:07:01.0: Dev MPS 128 MPSS 256 MRRS 4096 > > pci 0000:07:01.0: Dev MPS 256 MPSS 256 MRRS 128 > > pci 0000:00:06.0: Dev MPS 256 MPSS 256 MRRS 128 > > pci 0000:0e:00.0: Dev MPS 128 MPSS 128 MRRS 512 > > pci 0000:0e:00.0: MPS configured higher than maximum supported by the > > device. If a bus issue occurs, try running with pci=pci > > The above aspm and bus error went away after I added pcie_aspm=force > and pci=pcie_bus_safe. > > Instead of default to pcie_bus_perf that caused problems, why not > default to the formal behavior (see commit > b03e7495a862b028294f59fc87286d6d78ee7fa1). I believe a revert is in progress anyway, see my other thread (scsi: hpsa: how to destroy your files)