From: 管雪涛 <gxt@pku.edu.cn>
To: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: JBottomley@parallels.com,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Guan Xuetao <gxt@mprc.pku.edu.cn>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: 回复: [PATCH v2] [PATCH] drivers: scsi: mvsas: fix compiling issue by adding 'MVS_' for "enum pci_interrupt_cause"
Date: Wed, 21 May 2014 17:34:42 +0800 (CST) [thread overview]
Message-ID: <1315378557.42303.1400664882967.JavaMail.root@bj-mail03.pku.edu.cn> (raw)
In-Reply-To: <536C2D2B.6090501@gmail.com>
I checked these two files, and this patch looks good.
And, I'll put it into unicore32 repo.
Reviewed-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
----- Chen Gang <gang.chen.5i5j@gmail.com> 写道:
> The direct cause is IRQ_SPI is already defined as a macro in unicore32
> architecture (also, blackfin and mips architectures define it). The
> related error (unicore32 with allmodconfig)
>
> CC [M] drivers/scsi/mvsas/mv_94xx.o
> In file included from drivers/scsi/mvsas/mv_94xx.c:27:
> drivers/scsi/mvsas/mv_94xx.h:176: error: expected identifier before numeric constant
>
> And IRQ_SAS_A and IRQ_SAS_B are used as 'u32' (although "enum
> pci_interrupt_cause" is not used directly, now).
>
> All together, need add 'MVS_' for "enum pci_interrupt_cause".
>
>
> Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
> ---
> drivers/scsi/mvsas/mv_94xx.c | 10 ++++----
> drivers/scsi/mvsas/mv_94xx.h | 58 ++++++++++++++++++++++----------------------
> 2 files changed, 34 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
> index 1e4479f..9270d15 100644
> --- a/drivers/scsi/mvsas/mv_94xx.c
> +++ b/drivers/scsi/mvsas/mv_94xx.c
> @@ -564,7 +564,7 @@ static void mvs_94xx_interrupt_enable(struct mvs_info *mvi)
> u32 tmp;
>
> tmp = mr32(MVS_GBL_CTL);
> - tmp |= (IRQ_SAS_A | IRQ_SAS_B);
> + tmp |= (MVS_IRQ_SAS_A | MVS_IRQ_SAS_B);
> mw32(MVS_GBL_INT_STAT, tmp);
> writel(tmp, regs + 0x0C);
> writel(tmp, regs + 0x10);
> @@ -580,7 +580,7 @@ static void mvs_94xx_interrupt_disable(struct mvs_info *mvi)
>
> tmp = mr32(MVS_GBL_CTL);
>
> - tmp &= ~(IRQ_SAS_A | IRQ_SAS_B);
> + tmp &= ~(MVS_IRQ_SAS_A | MVS_IRQ_SAS_B);
> mw32(MVS_GBL_INT_STAT, tmp);
> writel(tmp, regs + 0x0C);
> writel(tmp, regs + 0x10);
> @@ -596,7 +596,7 @@ static u32 mvs_94xx_isr_status(struct mvs_info *mvi, int irq)
> if (!(mvi->flags & MVF_FLAG_SOC)) {
> stat = mr32(MVS_GBL_INT_STAT);
>
> - if (!(stat & (IRQ_SAS_A | IRQ_SAS_B)))
> + if (!(stat & (MVS_IRQ_SAS_A | MVS_IRQ_SAS_B)))
> return 0;
> }
> return stat;
> @@ -606,8 +606,8 @@ static irqreturn_t mvs_94xx_isr(struct mvs_info *mvi, int irq, u32 stat)
> {
> void __iomem *regs = mvi->regs;
>
> - if (((stat & IRQ_SAS_A) && mvi->id == 0) ||
> - ((stat & IRQ_SAS_B) && mvi->id == 1)) {
> + if (((stat & MVS_IRQ_SAS_A) && mvi->id == 0) ||
> + ((stat & MVS_IRQ_SAS_B) && mvi->id == 1)) {
> mw32_f(MVS_INT_STAT, CINT_DONE);
>
> spin_lock(&mvi->lock);
> diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
> index 487aa6f..14e1974 100644
> --- a/drivers/scsi/mvsas/mv_94xx.h
> +++ b/drivers/scsi/mvsas/mv_94xx.h
> @@ -150,35 +150,35 @@ enum chip_register_bits {
>
> enum pci_interrupt_cause {
> /* MAIN_IRQ_CAUSE (R10200) Bits*/
> - IRQ_COM_IN_I2O_IOP0 = (1 << 0),
> - IRQ_COM_IN_I2O_IOP1 = (1 << 1),
> - IRQ_COM_IN_I2O_IOP2 = (1 << 2),
> - IRQ_COM_IN_I2O_IOP3 = (1 << 3),
> - IRQ_COM_OUT_I2O_HOS0 = (1 << 4),
> - IRQ_COM_OUT_I2O_HOS1 = (1 << 5),
> - IRQ_COM_OUT_I2O_HOS2 = (1 << 6),
> - IRQ_COM_OUT_I2O_HOS3 = (1 << 7),
> - IRQ_PCIF_TO_CPU_DRBL0 = (1 << 8),
> - IRQ_PCIF_TO_CPU_DRBL1 = (1 << 9),
> - IRQ_PCIF_TO_CPU_DRBL2 = (1 << 10),
> - IRQ_PCIF_TO_CPU_DRBL3 = (1 << 11),
> - IRQ_PCIF_DRBL0 = (1 << 12),
> - IRQ_PCIF_DRBL1 = (1 << 13),
> - IRQ_PCIF_DRBL2 = (1 << 14),
> - IRQ_PCIF_DRBL3 = (1 << 15),
> - IRQ_XOR_A = (1 << 16),
> - IRQ_XOR_B = (1 << 17),
> - IRQ_SAS_A = (1 << 18),
> - IRQ_SAS_B = (1 << 19),
> - IRQ_CPU_CNTRL = (1 << 20),
> - IRQ_GPIO = (1 << 21),
> - IRQ_UART = (1 << 22),
> - IRQ_SPI = (1 << 23),
> - IRQ_I2C = (1 << 24),
> - IRQ_SGPIO = (1 << 25),
> - IRQ_COM_ERR = (1 << 29),
> - IRQ_I2O_ERR = (1 << 30),
> - IRQ_PCIE_ERR = (1 << 31),
> + MVS_IRQ_COM_IN_I2O_IOP0 = (1 << 0),
> + MVS_IRQ_COM_IN_I2O_IOP1 = (1 << 1),
> + MVS_IRQ_COM_IN_I2O_IOP2 = (1 << 2),
> + MVS_IRQ_COM_IN_I2O_IOP3 = (1 << 3),
> + MVS_IRQ_COM_OUT_I2O_HOS0 = (1 << 4),
> + MVS_IRQ_COM_OUT_I2O_HOS1 = (1 << 5),
> + MVS_IRQ_COM_OUT_I2O_HOS2 = (1 << 6),
> + MVS_IRQ_COM_OUT_I2O_HOS3 = (1 << 7),
> + MVS_IRQ_PCIF_TO_CPU_DRBL0 = (1 << 8),
> + MVS_IRQ_PCIF_TO_CPU_DRBL1 = (1 << 9),
> + MVS_IRQ_PCIF_TO_CPU_DRBL2 = (1 << 10),
> + MVS_IRQ_PCIF_TO_CPU_DRBL3 = (1 << 11),
> + MVS_IRQ_PCIF_DRBL0 = (1 << 12),
> + MVS_IRQ_PCIF_DRBL1 = (1 << 13),
> + MVS_IRQ_PCIF_DRBL2 = (1 << 14),
> + MVS_IRQ_PCIF_DRBL3 = (1 << 15),
> + MVS_IRQ_XOR_A = (1 << 16),
> + MVS_IRQ_XOR_B = (1 << 17),
> + MVS_IRQ_SAS_A = (1 << 18),
> + MVS_IRQ_SAS_B = (1 << 19),
> + MVS_IRQ_CPU_CNTRL = (1 << 20),
> + MVS_IRQ_GPIO = (1 << 21),
> + MVS_IRQ_UART = (1 << 22),
> + MVS_IRQ_SPI = (1 << 23),
> + MVS_IRQ_I2C = (1 << 24),
> + MVS_IRQ_SGPIO = (1 << 25),
> + MVS_IRQ_COM_ERR = (1 << 29),
> + MVS_IRQ_I2O_ERR = (1 << 30),
> + MVS_IRQ_PCIE_ERR = (1 << 31),
> };
>
> union reg_phy_cfg {
> --
> 1.9.2.459.g68773ac
prev parent reply other threads:[~2014-05-21 9:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-09 1:19 Chen Gang
2014-05-19 17:18 ` Christoph Hellwig
2014-05-20 1:28 ` Chen Gang
2014-05-21 9:34 ` 管雪涛 [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315378557.42303.1400664882967.JavaMail.root@bj-mail03.pku.edu.cn \
--to=gxt@pku.edu.cn \
--cc=JBottomley@parallels.com \
--cc=gang.chen.5i5j@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=gxt@mprc.pku.edu.cn \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®