From: Philipp Reisner <philipp.reisner@linbit.com>
To: linux-kernel@vger.kernel.org, Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Subject: [PATCH 02/16] drbd: Fixed logging of old connection state
Date: Thu, 8 Sep 2011 14:45:23 +0200 [thread overview]
Message-ID: <1315485937-18989-3-git-send-email-philipp.reisner@linbit.com> (raw)
In-Reply-To: <1315485937-18989-1-git-send-email-philipp.reisner@linbit.com>
During a disconnect the oc variable in _conn_request_state()
could become outdated. Determin the common old state after
sleeping.
While at it, I implemented that for all parts of the state
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
drivers/block/drbd/drbd_state.c | 117 +++++++++++++++++++++++++++++----------
1 files changed, 87 insertions(+), 30 deletions(-)
diff --git a/drivers/block/drbd/drbd_state.c b/drivers/block/drbd/drbd_state.c
index e712da7..3c3c141 100644
--- a/drivers/block/drbd/drbd_state.c
+++ b/drivers/block/drbd/drbd_state.c
@@ -1359,42 +1359,100 @@ static void print_conn_state_change(struct drbd_tconn *tconn, enum drbd_conns oc
conn_info(tconn, "%s\n", pb);
}
-struct _is_valid_itr_params {
- enum drbd_conns oc;
- enum {
- OC_UNINITIALIZED,
- OC_CONSISTENT,
- OC_INCONSISTENT,
- } oc_state;
-};
+enum sp_state {
+ OC_UNINITIALIZED,
+ OC_CONSISTENT,
+ OC_INCONSISTENT,
+} oc_state;
+
+static void common_state_part(enum sp_state *sps, int *sp, int nsp)
+{
+ switch (*sps) {
+ case OC_UNINITIALIZED:
+ *sp = nsp;
+ *sps = OC_CONSISTENT;
+ break;
+ case OC_CONSISTENT:
+ if (*sp != nsp)
+ *sps = OC_INCONSISTENT;
+ break;
+ case OC_INCONSISTENT:
+ break;
+ }
+}
+
+void conn_old_common_state(struct drbd_tconn *tconn, union drbd_state *pcs, union drbd_state *pmask)
+{
+ union drbd_state css = {}; /* common state state */
+ union drbd_state os, cs = {}; /* old_state, common_state */
+ union drbd_state mask = {};
+ enum sp_state sps; /* state part state */
+ int sp; /* state part */
+ struct drbd_conf *mdev;
+ int vnr;
+
+ idr_for_each_entry(&tconn->volumes, mdev, vnr) {
+ os = mdev->state;
+
+ sps = css.role;
+ sp = cs.role;
+ common_state_part(&sps, &sp, os.role);
+ css.role = sps;
+ cs.role = sp;
+
+ sps = css.peer;
+ sp = cs.peer;
+ common_state_part(&sps, &sp, os.peer);
+ css.peer = sps;
+ cs.peer = sp;
+
+ sps = css.conn;
+ sp = cs.conn;
+ common_state_part(&sps, &sp, os.conn);
+ css.conn = sps;
+ cs.conn = sp;
+
+ sps = css.disk;
+ sp = cs.disk;
+ common_state_part(&sps, &sp, os.disk);
+ css.disk = sps;
+ cs.disk = sp;
+
+ sps = css.pdsk;
+ sp = cs.pdsk;
+ common_state_part(&sps, &sp, os.pdsk);
+ css.pdsk = sps;
+ cs.pdsk = sp;
+ }
+
+ if (css.role == OC_CONSISTENT)
+ mask.role = R_MASK;
+ if (css.peer == OC_CONSISTENT)
+ mask.peer = R_MASK;
+ if (css.conn == OC_CONSISTENT)
+ mask.conn = C_MASK;
+ if (css.disk == OC_CONSISTENT)
+ mask.disk = D_MASK;
+ if (css.pdsk == OC_CONSISTENT)
+ mask.pdsk = D_MASK;
+
+ *pcs = cs;
+ *pmask = mask;
+}
static enum drbd_state_rv
conn_is_valid_transition(struct drbd_tconn *tconn, union drbd_state mask, union drbd_state val,
- enum chg_state_flags flags, struct _is_valid_itr_params *params)
+ enum chg_state_flags flags)
{
enum drbd_state_rv rv = SS_SUCCESS;
union drbd_state ns, os;
struct drbd_conf *mdev;
int vnr;
- params->oc_state = OC_UNINITIALIZED;
idr_for_each_entry(&tconn->volumes, mdev, vnr) {
os = mdev->state;
ns = sanitize_state(mdev, apply_mask_val(os, mask, val), NULL);
- switch (params->oc_state) {
- case OC_UNINITIALIZED:
- params->oc = os.conn;
- params->oc_state = OC_CONSISTENT;
- break;
- case OC_CONSISTENT:
- if (params->oc != os.conn)
- params->oc_state = OC_INCONSISTENT;
- break;
- case OC_INCONSISTENT:
- break;
- }
-
if (ns.i == os.i)
continue;
@@ -1452,7 +1510,6 @@ conn_set_state(struct drbd_tconn *tconn, union drbd_state mask, union drbd_state
static enum drbd_state_rv
_conn_rq_cond(struct drbd_tconn *tconn, union drbd_state mask, union drbd_state val)
{
- struct _is_valid_itr_params params;
enum drbd_conns oc = tconn->cstate;
enum drbd_state_rv rv;
@@ -1466,7 +1523,7 @@ _conn_rq_cond(struct drbd_tconn *tconn, union drbd_state mask, union drbd_state
rv = oc != C_WF_REPORT_PARAMS ? SS_CW_NO_NEED : SS_UNKNOWN_ERROR;
if (rv == SS_UNKNOWN_ERROR)
- rv = conn_is_valid_transition(tconn, mask, val, CS_NO_CSTATE_CHG, ¶ms);
+ rv = conn_is_valid_transition(tconn, mask, val, CS_NO_CSTATE_CHG);
if (rv == SS_SUCCESS)
rv = SS_UNKNOWN_ERROR; /* cont waiting, otherwise fail. */
@@ -1506,16 +1563,15 @@ _conn_request_state(struct drbd_tconn *tconn, union drbd_state mask, union drbd_
enum chg_state_flags flags)
{
enum drbd_state_rv rv = SS_SUCCESS;
- struct _is_valid_itr_params params;
struct after_conn_state_chg_work *acscw;
enum drbd_conns oc = tconn->cstate;
- union drbd_state ms;
+ union drbd_state ms, os_val, os_mask;
rv = is_valid_conn_transition(oc, val.conn);
if (rv < SS_SUCCESS)
goto abort;
- rv = conn_is_valid_transition(tconn, mask, val, flags, ¶ms);
+ rv = conn_is_valid_transition(tconn, mask, val, flags);
if (rv < SS_SUCCESS)
goto abort;
@@ -1525,8 +1581,9 @@ _conn_request_state(struct drbd_tconn *tconn, union drbd_state mask, union drbd_
goto abort;
}
- if (params.oc_state == OC_CONSISTENT) {
- oc = params.oc;
+ conn_old_common_state(tconn, &os_val, &os_mask);
+ if (os_mask.conn == C_MASK) {
+ oc = os_val.conn;
print_conn_state_change(tconn, oc, val.conn);
flags |= CS_NO_CSTATE_CHG;
}
--
1.7.4.1
next prev parent reply other threads:[~2011-09-08 12:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-08 12:45 [RFC 00/16] drbd: part 8 of adding multiple volume support to drbd Philipp Reisner
2011-09-08 12:45 ` [PATCH 01/16] drbd: Use the idr_for_each_entry() iterator instead of idr_for_each() Philipp Reisner
2011-09-08 12:45 ` Philipp Reisner [this message]
2011-09-08 12:45 ` [PATCH 03/16] drbd: Print common state changes of all volumes as connection state changes Philipp Reisner
2011-09-08 12:45 ` [PATCH 04/16] drbd: Allow to disconnect if one volume is diskless Philipp Reisner
2011-09-08 12:45 ` [PATCH 05/16] drbd: Do not segfault if a sync dependency reaches a diskless device Philipp Reisner
2011-09-08 12:45 ` [PATCH 06/16] drbd: Pass struct packet_info down to the asender receive functions Philipp Reisner
2011-09-08 12:45 ` [PATCH 07/16] drbd: Map from (connection, volume number) to device in the asender handlers Philipp Reisner
2011-09-08 12:45 ` [PATCH 08/16] drbd: drbd_connect(): Initialize struct drbd_socket before sending anything Philipp Reisner
2011-09-08 12:45 ` [PATCH 09/16] drbd: _conn_send_cmd(), _drbd_send_cmd(): Pass a struct drbd_socket instead of a plain socket Philipp Reisner
2011-09-08 12:45 ` [PATCH 10/16] drbd: Change how the initial packets are called Philipp Reisner
2011-09-08 12:45 ` [PATCH 11/16] drbd: Change how the "handshake" " Philipp Reisner
2011-09-08 12:45 ` [PATCH 12/16] drbd: introduce the "initialized" activity log transaction type Philipp Reisner
2011-09-08 12:45 ` [PATCH 13/16] drbd: preparation commit, pass drbd_interval to drbd_al_begin/complete_io Philipp Reisner
2011-09-08 12:45 ` [PATCH 14/16] drbd: prepare to activate two activity log extents at once Philipp Reisner
2011-09-08 12:45 ` [PATCH 15/16] drbd: get rid of bio_split, allow bios of "arbitrary" size Philipp Reisner
2011-09-08 12:45 ` [PATCH 16/16] drbd: improvements to activate/deactivate multiple activity log extents Philipp Reisner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315485937-18989-3-git-send-email-philipp.reisner@linbit.com \
--to=philipp.reisner@linbit.com \
--cc=axboe@kernel.dk \
--cc=drbd-dev@lists.linbit.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®