From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933133Ab1INUAV (ORCPT ); Wed, 14 Sep 2011 16:00:21 -0400 Received: from mail-pz0-f46.google.com ([209.85.210.46]:59646 "EHLO mail-pz0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932611Ab1INUAQ (ORCPT ); Wed, 14 Sep 2011 16:00:16 -0400 X-Greylist: delayed 417 seconds by postgrey-1.27 at vger.kernel.org; Wed, 14 Sep 2011 16:00:16 EDT From: "Justin P. Mattock" To: trivial@kernel.org Cc: linux-kernel@vger.kernel.org, "Justin P. Mattock" Subject: [PATCH 3/3]Fix typos in the kernel Date: Wed, 14 Sep 2011 12:52:48 -0700 Message-Id: <1316029968-11277-4-git-send-email-justinmattock@gmail.com> X-Mailer: git-send-email 1.7.6 In-Reply-To: <1316029968-11277-1-git-send-email-justinmattock@gmail.com> References: <1316029968-11277-1-git-send-email-justinmattock@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: "Justin P. Mattock" The below patch fixes some typos that I have found in the kernel. Note:not sure if I am able to send this, due to kernel.org being down. Signed-off-by: Justin P. Mattock --- drivers/staging/brcm80211/brcmfmac/sdio_host.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3200.c | 2 +- drivers/staging/cxt1e1/libsbew.h | 2 +- drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 4 ++-- drivers/staging/ft1000/ft1000-usb/ft1000_hw.c | 2 +- drivers/staging/iio/industrialio-trigger.c | 2 +- drivers/staging/sep/sep_driver.c | 2 +- drivers/staging/tidspbridge/Kconfig | 2 +- drivers/staging/tidspbridge/rmgr/dbdcd.c | 2 +- drivers/tty/serial/mrst_max3110.c | 2 +- drivers/usb/gadget/langwell_udc.c | 2 +- drivers/usb/host/hwa-hc.c | 2 +- drivers/usb/host/imx21-hcd.c | 2 +- drivers/usb/musb/musb_gadget.c | 2 +- drivers/usb/otg/fsl_otg.c | 2 +- drivers/uwb/i1480/dfu/usb.c | 2 +- fs/btrfs/inode.c | 2 +- fs/ext3/inode.c | 2 +- fs/ext4/inode.c | 2 +- fs/nfsd/nfs4state.c | 2 +- fs/ocfs2/file.c | 2 +- fs/xfs/xfs_file.c | 6 +++--- fs/xfs/xfs_log_cil.c | 2 +- include/drm/drmP.h | 2 +- include/linux/wanrouter.h | 2 +- include/net/mac80211.h | 2 +- net/ipv4/ip_fragment.c | 2 +- net/mac80211/work.c | 2 +- net/sctp/endpointola.c | 2 +- tools/power/cpupower/debug/i386/intel_gsic.c | 2 +- 30 files changed, 33 insertions(+), 33 deletions(-) diff --git a/drivers/staging/brcm80211/brcmfmac/sdio_host.h b/drivers/staging/brcm80211/brcmfmac/sdio_host.h index d345472..470c508 100644 --- a/drivers/staging/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/staging/brcm80211/brcmfmac/sdio_host.h @@ -103,7 +103,7 @@ struct brcmf_sdreg { struct sdioh_info { struct osl_info *osh; /* osh handler */ - bool client_intr_enabled; /* interrupt connnected flag */ + bool client_intr_enabled; /* interrupt connected flag */ bool intr_handler_valid; /* client driver interrupt handler valid */ void (*intr_handler)(void *); /* registered interrupt handler */ void *intr_handler_arg; /* argument to call interrupt handler */ diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c index c75a1a1..f9545b0 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c @@ -3598,7 +3598,7 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device *dev) n = comedi_buf_write_alloc(s->async, (7 + 12) * sizeof(unsigned int)); - /* If not enougth memory available, event is set to Comedi Buffer Errror */ + /* If not enough memory available, event is set to Comedi Buffer Error */ if (n > ((7 + 12) * sizeof(unsigned int))) { printk("\ncomedi_buf_write_alloc n = %i", n); s->async->events |= COMEDI_CB_ERROR; diff --git a/drivers/staging/cxt1e1/libsbew.h b/drivers/staging/cxt1e1/libsbew.h index 5c99646..ae8f06d 100644 --- a/drivers/staging/cxt1e1/libsbew.h +++ b/drivers/staging/cxt1e1/libsbew.h @@ -323,7 +323,7 @@ struct sbecom_port_param #define CFG_CH_DINV_TX 0x02 -/* Posssible resettable chipsets/functions */ +/* Possible resettable chipsets/functions */ #define RESET_DEV_TEMUX 1 #define RESET_DEV_TECT3 RESET_DEV_TEMUX #define RESET_DEV_PLL 2 diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c index 990b2af..8156d79 100644 --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c @@ -349,10 +349,10 @@ static void ft1000_reset_asic(struct net_device *dev) } mdelay(1); if (info->AsicID == ELECTRABUZZ_ID) { - // set watermark to -1 in order to not generate an interrrupt + // set watermark to -1 in order to not generate an interrupt ft1000_write_reg(dev, FT1000_REG_WATERMARK, 0xffff); } else { - // set watermark to -1 in order to not generate an interrrupt + // set watermark to -1 in order to not generate an interrupt ft1000_write_reg(dev, FT1000_REG_MAG_WATERMARK, 0xffff); } // clear interrupts diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c index 3f303ea..1b5e8a7 100644 --- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c +++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c @@ -601,7 +601,7 @@ static void ft1000_reset_asic(struct net_device *dev) mdelay(1); - /* set watermark to -1 in order to not generate an interrrupt */ + /* set watermark to -1 in order to not generate an interrupt */ ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK); /* clear interrupts */ diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/staging/iio/industrialio-trigger.c index 90ca2df..d4437a0 100644 --- a/drivers/staging/iio/industrialio-trigger.c +++ b/drivers/staging/iio/industrialio-trigger.c @@ -308,7 +308,7 @@ void iio_dealloc_pollfunc(struct iio_poll_func *pf) EXPORT_SYMBOL_GPL(iio_dealloc_pollfunc); /** - * iio_trigger_read_currrent() - trigger consumer sysfs query which trigger + * iio_trigger_read_current() - trigger consumer sysfs query which trigger * * For trigger consumers the current_trigger interface allows the trigger * used by the device to be queried. diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c index bf7286e..0112302 100644 --- a/drivers/staging/sep/sep_driver.c +++ b/drivers/staging/sep/sep_driver.c @@ -1235,7 +1235,7 @@ static void sep_build_lli_table(struct sep_device *sep, /* Counter of lli array entry */ u32 array_counter; - /* Init currrent table data size and lli array entry counter */ + /* Init current table data size and lli array entry counter */ curr_table_data_size = 0; array_counter = 0; *num_table_entries_ptr = 1; diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig index 93de4f2..21a559e 100644 --- a/drivers/staging/tidspbridge/Kconfig +++ b/drivers/staging/tidspbridge/Kconfig @@ -78,7 +78,7 @@ config TIDSPBRIDGE_NTFY_PWRERR bool "Notify power errors" depends on TIDSPBRIDGE help - Enable notifications to registered clients on the event of power errror + Enable notifications to registered clients on the event of power error trying to suspend bridge driver. Say Y, to signal this event as a fatal error, this will require a bridge restart to recover. diff --git a/drivers/staging/tidspbridge/rmgr/dbdcd.c b/drivers/staging/tidspbridge/rmgr/dbdcd.c index a7e407e..fda2402 100644 --- a/drivers/staging/tidspbridge/rmgr/dbdcd.c +++ b/drivers/staging/tidspbridge/rmgr/dbdcd.c @@ -285,7 +285,7 @@ int dcd_enumerate_object(s32 index, enum dsp_dcdobjtype obj_type, enum_refs = 0; /* - * TODO: Revisit, this is not an errror case but code + * TODO: Revisit, this is not an error case but code * expects non-zero value. */ status = ENODATA; diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 23bc743..492c14d 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -23,7 +23,7 @@ * 1 word. If SPI master controller doesn't support sclk frequency change, * then the char need be sent out one by one with some delay * - * 2. Currently only RX available interrrupt is used, no need for waiting TXE + * 2. Currently only RX available interrupt is used, no need for waiting TXE * interrupt for a low speed UART device */ diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index a06e2c2..ff4d40d 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -2969,7 +2969,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev) handle_port_change(dev); } - /* suspend interrrupt */ + /* suspend interrupt */ if (irq_sts & STS_SLI) { dev_vdbg(&dev->pdev->dev, "suspend interrupt\n"); handle_bus_suspend(dev); diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index 9bfac65..b5c56a9 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -481,7 +481,7 @@ static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, encryption_value = 0; } - /* Set the encryption type for commmunicating with the device */ + /* Set the encryption type for communicating with the device */ result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), USB_REQ_SET_ENCRYPTION, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index af05718..7b5de30 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -473,7 +473,7 @@ static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep) /* End handling */ /* =========================================== */ -/* Endpoint now idle - release it's ETD(s) or asssign to queued request */ +/* Endpoint now idle - release it's ETD(s) or assign to queued request */ static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv) { int i; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index e818203..fe8d14c 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) * most these gadgets, end of is signified either by a short packet, * or filling the last byte of the buffer. (Sending extra data in * that last pckate should trigger an overflow fault.) But in mode 1, - * we don't get DMA completion interrrupt for short packets. + * we don't get DMA completion interrupt for short packets. * * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1), * to get endpoint interrupt on every DMA req, but that didn't seem diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c index 0f420b2..2d9cc44 100644 --- a/drivers/usb/otg/fsl_otg.c +++ b/drivers/usb/otg/fsl_otg.c @@ -639,7 +639,7 @@ static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA) * Delayed pin detect interrupt processing. * * When the Mini-A cable is disconnected from the board, - * the pin-detect interrupt happens before the disconnnect + * the pin-detect interrupt happens before the disconnect * interrupts for the connected device(s). In order to * process the disconnect interrupt(s) prior to switching * roles, the pin-detect interrupts are delayed, and handled diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index ba86643..a315d4d 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -104,7 +104,7 @@ void i1480_usb_destroy(struct i1480_usb *i1480_usb) * * Data buffers to USB cannot be on the stack or in vmalloc'ed areas, * so we copy it to the local i1480 buffer before proceeding. In any - * case, we have a max size we can send, soooo. + * case, we have a max size we can send. */ static int i1480_usb_write(struct i1480 *i1480, u32 memory_address, diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 0ccc743..5623536 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2168,7 +2168,7 @@ enum btrfs_orphan_cleanup_state { }; /* - * This is called in transaction commmit time. If there are no orphan + * This is called in transaction commit time. If there are no orphan * files in the subvolume, it removes orphan item and frees block_rsv * structure. */ diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 04da6ac..7a00f8e 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -2490,7 +2490,7 @@ int ext3_can_truncate(struct inode *inode) * transaction, and VFS/VM ensures that ext3_truncate() cannot run * simultaneously on behalf of the same inode. * - * As we work through the truncate and commmit bits of it to the journal there + * As we work through the truncate and commit bits of it to the journal there * is one core, guiding principle: the file's tree must always be consistent on * disk. We must be able to restart the truncate after a crash. * diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c4da98a..6b1daeb 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3128,7 +3128,7 @@ int ext4_punch_hole(struct file *file, loff_t offset, loff_t length) * transaction, and VFS/VM ensures that ext4_truncate() cannot run * simultaneously on behalf of the same inode. * - * As we work through the truncate and commmit bits of it to the journal there + * As we work through the truncate and commit bits of it to the journal there * is one core, guiding principle: the file's tree must always be consistent on * disk. We must be able to restart the truncate after a crash. * diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 3787ec1..4e65380 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -554,7 +554,7 @@ static int nfsd4_sanitize_slot_size(u32 size) /* * XXX: If we run out of reserved DRC memory we could (up to a point) * re-negotiate active sessions and reduce their slot usage to make - * rooom for new connections. For now we just fail the create session. + * room for new connections. For now we just fail the create session. */ static int nfsd4_get_drc_mem(int slotsize, u32 num) { diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index de4ea1a..199c606 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2108,7 +2108,7 @@ static int ocfs2_prepare_inode_for_write(struct file *file, * remove_suid() calls ->setattr without any hint that * we may have already done our cluster locking. Since * ocfs2_setattr() *must* take cluster locks to - * proceeed, this will lead us to recursively lock the + * proceed, this will lead us to recursively lock the * inode. There's also the dinode i_size state which * can be lost via setattr during extending writes (we * set inode->i_size at the end of a write. */ diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c index 7f7b424..cf91287 100644 --- a/fs/xfs/xfs_file.c +++ b/fs/xfs/xfs_file.c @@ -183,10 +183,10 @@ xfs_file_fsync( /* * First check if the VFS inode is marked dirty. All the dirtying - * of non-transactional updates no goes through mark_inode_dirty*, - * which allows us to distinguish beteeen pure timestamp updates + * of non-transactional updates do not go through mark_inode_dirty*, + * which allows us to distinguish between pure timestamp updates * and i_size updates which need to be caught for fdatasync. - * After that also theck for the dirty state in the XFS inode, which + * After that also check for the dirty state in the XFS inode, which * might gets cleared when the inode gets written out via the AIL * or xfs_iflush_cluster. */ diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c index c7755d5..3ba29b1 100644 --- a/fs/xfs/xfs_log_cil.c +++ b/fs/xfs/xfs_log_cil.c @@ -256,7 +256,7 @@ xfs_cil_prepare_item( * Insert the log items into the CIL and calculate the difference in space * consumed by the item. Add the space to the checkpoint ticket and calculate * if the change requires additional log metadata. If it does, take that space - * as well. Remove the amount of space we addded to the checkpoint ticket from + * as well. Remove the amount of space we added to the checkpoint ticket from * the current transaction ticket so that the accounting works out correctly. */ static void diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 9b7c2bb..ab98697 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -819,7 +819,7 @@ struct drm_driver { * Specifically, the timestamp in @vblank_time should correspond as * closely as possible to the time when the first video scanline of * the video frame after the end of VBLANK will start scanning out, - * the time immmediately after end of the VBLANK interval. If the + * the time immediately after end of the VBLANK interval. If the * @crtc is currently inside VBLANK, this will be a time in the future. * If the @crtc is currently scanning out a frame, this will be the * past start time of the current scanout. This is meant to adhere diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h index e0aa396..3157cc1 100644 --- a/include/linux/wanrouter.h +++ b/include/linux/wanrouter.h @@ -309,7 +309,7 @@ typedef struct wandev_conf #define WANOPT_EVEN 2 /* CHDLC Protocol Options */ -/* DF Commmented out for now. +/* DF Commented out for now. #define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT #define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9259e97..6400ba4 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1389,7 +1389,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * DOC: Beacon filter support * * Some hardware have beacon filter support to reduce host cpu wakeups - * which will reduce system power consumption. It usuallly works so that + * which will reduce system power consumption. It usually works so that * the firmware creates a checksum of the beacon but omits all constantly * changing elements (TSF, TIM etc). Whenever the checksum changes the * beacon is forwarded to the host, otherwise it will be just dropped. That diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index 0e0ab98..b4544c6 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -392,7 +392,7 @@ static int ip_frag_queue(struct ipq *qp, struct sk_buff *skb) /* Is this the final fragment? */ if ((flags & IP_MF) == 0) { /* If we already have some bits beyond end - * or have different end, the segment is corrrupted. + * or have different end, the segment is corrupted. */ if (end < qp->q.len || ((qp->q.last_in & INET_FRAG_LAST_IN) && end != qp->q.len)) diff --git a/net/mac80211/work.c b/net/mac80211/work.c index 380b9a7..cdd7ea0 100644 --- a/net/mac80211/work.c +++ b/net/mac80211/work.c @@ -1097,7 +1097,7 @@ static void ieee80211_work_work(struct work_struct *work) local->tmp_channel = NULL; /* If tmp_channel wasn't operating channel, then * we need to go back on-channel. - * NOTE: If we can ever be here while scannning, + * NOTE: If we can ever be here while scanning, * or if the hw_config() channel config logic changes, * then we may need to do a more thorough check to see if * we still need to do a hardware config. Currently, diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c index c8cc24e..68a385d 100644 --- a/net/sctp/endpointola.c +++ b/net/sctp/endpointola.c @@ -415,7 +415,7 @@ static void sctp_endpoint_bh_rcv(struct work_struct *work) sctp_subtype_t subtype; sctp_state_t state; int error = 0; - int first_time = 1; /* is this the first time through the looop */ + int first_time = 1; /* is this the first time through the loop */ if (ep->base.dead) return; diff --git a/tools/power/cpupower/debug/i386/intel_gsic.c b/tools/power/cpupower/debug/i386/intel_gsic.c index 53f5293..95ce4a6 100644 --- a/tools/power/cpupower/debug/i386/intel_gsic.c +++ b/tools/power/cpupower/debug/i386/intel_gsic.c @@ -53,7 +53,7 @@ int main (void) "RISK.\n"); } if ((r.ebx & 0xffff) != 0xb2) { - printf("non-default command port. If speedstep-smi " + printf("non-default command port. If spedstep-smi " "doesn't work out of the box,\nyou may want to " "try out the default value by passing " "smi_port=0x82 to the module\n ON YOUR OWN " -- 1.7.6