Re: [RESEND] [PATCH] [SCSI] libsas: Allow expander T-T attachments

[Luben Tuikov <ltuikov@yahoo.com>]

LOOK AT THE SOURCE CODE: drivers/scsi/libsas/sas_expander.c:

/* Here we spill over 80 columns.  It is intentional.
 */
static int sas_check_parent_topology(struct domain_device *child)
{
    struct expander_device *child_ex = &child->ex_dev;
    struct expander_device *parent_ex;
    int i;
    int res = 0;

    if (!child->parent)
        return 0;

    if (child->parent->dev_type != EDGE_DEV &&
        child->parent->dev_type != FANOUT_DEV)
        return 0;
...

ARE WE DONE?

----- Original Message -----

> From: Mark Salyzyn <mark_salyzyn@us.xyratex.com>
> To: Luben Tuikov <ltuikov@yahoo.com>; James Bottomley <jbottomley@parallels.com>
> Cc: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org
> Sent: Thursday, September 22, 2011 9:55 AM
> Subject: RE: [RESEND] [PATCH] [SCSI] libsas: Allow expander T-T attachments
> 
> Except for the fact the patch as located in the attachment is still not in 
> compliance, the patch works for me.
> 
> Sincerely -- Mark Salyzyn
> 
>>  scsi-misc-2.6/scripts/checkpatch.pl 
> 0001-SCSI-libsas-Allow-expander-T-T-attachments.patch
> WARNING: line over 80 characters
> #57: FILE: drivers/scsi/libsas/sas_expander.c:1245:
> +                               if (child_phy->routing_attr == 
> SUBTRACTIVE_ROUTING ||
> 
> WARNING: line over 80 characters
> #59: FILE: drivers/scsi/libsas/sas_expander.c:1247:
> +                                    child_ex->t2t_supp && 
> parent_ex->t2t_supp)) {
> 
> WARNING: line over 80 characters
> #62: FILE: drivers/scsi/libsas/sas_expander.c:1250:
> +                                       sas_print_parent_topology_bug(child, 
> parent_phy, child_phy);
> 
> total: 0 errors, 3 warnings, 82 lines checked
> 
> 0001-SCSI-libsas-Allow-expander-T-T-attachments.patch has style problems, please
> review.
> 
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
> 
> -----Original Message-----
> From: linux-scsi-owner@vger.kernel.org [mailto:linux-scsi-owner@vger.kernel.org] 
> On Behalf Of Luben Tuikov
> Sent: Thursday, September 22, 2011 12:42 PM
> To: James Bottomley
> Cc: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: [RESEND] [PATCH] [SCSI] libsas: Allow expander T-T attachments
> 
> Allow expander table-to-table attachments for
> expanders that support it.
> 
> Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
> ---
>  drivers/scsi/libsas/sas_expander.c |   20 ++++++++++++++------
>  include/scsi/libsas.h              |    3 +++
>  include/scsi/sas.h                 |   14 ++++++++++++--
>  3 files changed, 29 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/scsi/libsas/sas_expander.c 
> b/drivers/scsi/libsas/sas_expander.c
> index f84084b..e8d0115 100644
> --- a/drivers/scsi/libsas/sas_expander.c
> +++ b/drivers/scsi/libsas/sas_expander.c
> @@ -329,6 +329,7 @@ static void ex_assign_report_general(struct domain_device 
> *dev,
>      dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
>      dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
>      dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
> +    dev->ex_dev.t2t_supp = rg->t2t_supp;
>      dev->ex_dev.conf_route_table = rg->conf_route_table;
>      dev->ex_dev.configuring = rg->configuring;
>      memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 
> 8);
> @@ -1133,15 +1134,17 @@ static void sas_print_parent_topology_bug(struct 
> domain_device *child,
>      };
>      struct domain_device *parent = child->parent;
>  
> -    sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x 
> "
> -           "has %c:%c routing link!\n",
> +    sas_printk("%s ex %016llx (T2T supp:%d) phy 0x%x <--> %s ex 
> %016llx "
> +           "(T2T supp:%d) phy 0x%x has %c:%c routing link!\n",
>  
>             ex_type[parent->dev_type],
>             SAS_ADDR(parent->sas_addr),
> +           parent->ex_dev.t2t_supp,
>             parent_phy->phy_id,
>  
>             ex_type[child->dev_type],
>             SAS_ADDR(child->sas_addr),
> +           child->ex_dev.t2t_supp,
>             child_phy->phy_id,
>  
>             ra_char[parent_phy->routing_attr],
> @@ -1238,10 +1241,15 @@ static int sas_check_parent_topology(struct 
> domain_device *child)
>                      sas_print_parent_topology_bug(child, parent_phy, 
> child_phy);
>                      res = -ENODEV;
>                  }
> -            } else if (parent_phy->routing_attr == TABLE_ROUTING &&
> -                   child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
> -                sas_print_parent_topology_bug(child, parent_phy, child_phy);
> -                res = -ENODEV;
> +            } else if (parent_phy->routing_attr == TABLE_ROUTING) {
> +                if (child_phy->routing_attr == SUBTRACTIVE_ROUTING ||
> +                    (child_phy->routing_attr == TABLE_ROUTING &&
> +                     child_ex->t2t_supp && parent_ex->t2t_supp)) 
> {
> +                    /* All good */;
> +                } else {
> +                    sas_print_parent_topology_bug(child, parent_phy, 
> child_phy);
> +                    res = -ENODEV;
> +                }
>              }
>              break;
>          case FANOUT_DEV:
> diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
> index ee86606..793f80b 100644
> --- a/include/scsi/libsas.h
> +++ b/include/scsi/libsas.h
> @@ -142,8 +142,11 @@ struct expander_device {
>      u16    ex_change_count;
>      u16    max_route_indexes;
>      u8     num_phys;
> +
> +    u8     t2t_supp:1;
>      u8     configuring:1;
>      u8     conf_route_table:1;
> +
>      u8     enclosure_logical_id[8];
>  
>      struct ex_phy *ex_phy;
> diff --git a/include/scsi/sas.h b/include/scsi/sas.h
> index e9fd022..f59f182 100644
> --- a/include/scsi/sas.h
> +++ b/include/scsi/sas.h
> @@ -341,7 +341,12 @@ struct report_general_resp {
>  
>      u8      conf_route_table:1;
>      u8      configuring:1;
> -    u8      _r_b:6;
> +    u8    config_others:1;
> +    u8    orej_retry_supp:1;
> +    u8    stp_cont_awt:1;
> +    u8    self_config:1;
> +    u8    zone_config:1;
> +    u8    t2t_supp:1;
>  
>      u8      _r_c;
>  
> @@ -528,7 +533,12 @@ struct report_general_resp {
>      u8      _r_a;
>      u8      num_phys;
>  
> -    u8      _r_b:6;
> +    u8    t2t_supp:1;
> +    u8    zone_config:1;
> +    u8    self_config:1;
> +    u8    stp_cont_awt:1;
> +    u8    orej_retry_supp:1;
> +    u8    config_others:1;
>      u8      configuring:1;
>      u8      conf_route_table:1;
>  
> -- 
> 1.7.2.2.165.gbc382
> ______________________________________________________________________
> This email may contain privileged or confidential information, which should only 
> be used for the purpose for which it was sent by Xyratex. No further rights or 
> licenses are granted to use such information. If you are not the intended 
> recipient of this message, please notify the sender by return and delete it. You 
> may not use, copy, disclose or rely on the information contained in it.
> 
> Internet email is susceptible to data corruption, interception and unauthorised 
> amendment for which Xyratex does not accept liability. While we have taken 
> reasonable precautions to ensure that this email is free of viruses, Xyratex 
> does not accept liability for the presence of any computer viruses in this 
> email, nor for any losses caused as a result of viruses.
> 
> Xyratex Technology Limited (03134912), Registered in England & Wales, 
> Registered Office, Langstone Road, Havant, Hampshire, PO9 1SA.
> 
> The Xyratex group of companies also includes, Xyratex Ltd, registered in 
> Bermuda, Xyratex International Inc, registered in California, Xyratex (Malaysia) 
> Sdn Bhd registered in Malaysia, Xyratex Technology (Wuxi) Co Ltd registered in 
> The People's Republic of China and Xyratex Japan Limited registered in 
> Japan.
> ______________________________________________________________________
>