From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: xen-devel@lists.xensource.com, linux-kernel@vger.kernel.org,
hch@infradead.org, Jan Beulich <JBeulich@novell.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH 1/3] xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests.
Date: Mon, 10 Oct 2011 11:28:12 -0400 [thread overview]
Message-ID: <1318260494-27985-2-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1318260494-27985-1-git-send-email-konrad.wilk@oracle.com>
We emulate the barrier requests by draining the outstanding bio's
and then sending the WRITE_FLUSH command. To drain the I/Os
we use the refcnt that is used during disconnect to wait for all
the I/Os before disconnecting from the frontend. We latch on its
value and if it reaches either the threshold for disconnect or when
there are no more outstanding I/Os, then we have drained all I/Os.
Suggested-by: Christopher Hellwig <hch@infradead.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
drivers/block/xen-blkback/blkback.c | 37 +++++++++++++++++++++++++++++++++-
drivers/block/xen-blkback/common.h | 5 ++++
drivers/block/xen-blkback/xenbus.c | 18 +++++++++++++++++
3 files changed, 58 insertions(+), 2 deletions(-)
diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index e0dab61..184b133 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -452,6 +452,23 @@ static void xen_blk_discard(struct xen_blkif *blkif, struct blkif_request *req)
make_response(blkif, req->id, req->operation, status);
}
+static void xen_blk_drain_io(struct xen_blkif *blkif)
+{
+ atomic_set(&blkif->drain, 1);
+ do {
+ wait_for_completion_interruptible_timeout(
+ &blkif->drain_complete, HZ);
+
+ if (!atomic_read(&blkif->drain))
+ break;
+ /* The initial value is one, and one refcnt taken at the
+ * start of the xen_blkif_schedule thread. */
+ if (atomic_read(&blkif->refcnt) <= 2)
+ break;
+ } while (!kthread_should_stop());
+ atomic_set(&blkif->drain, 0);
+}
+
/*
* Completion callback on the bio's. Called as bh->b_end_io()
*/
@@ -464,6 +481,11 @@ static void __end_block_io_op(struct pending_req *pending_req, int error)
pr_debug(DRV_PFX "flush diskcache op failed, not supported\n");
xen_blkbk_flush_diskcache(XBT_NIL, pending_req->blkif->be, 0);
pending_req->status = BLKIF_RSP_EOPNOTSUPP;
+ } else if ((pending_req->operation == BLKIF_OP_WRITE_BARRIER) &&
+ (error == -EOPNOTSUPP)) {
+ pr_debug(DRV_PFX "write barrier op failed, not supported\n");
+ xen_blkbk_barrier(XBT_NIL, pending_req->blkif->be, 0);
+ pending_req->status = BLKIF_RSP_EOPNOTSUPP;
} else if (error) {
pr_debug(DRV_PFX "Buffer not up-to-date at end of operation,"
" error=%d\n", error);
@@ -481,6 +503,10 @@ static void __end_block_io_op(struct pending_req *pending_req, int error)
pending_req->operation, pending_req->status);
xen_blkif_put(pending_req->blkif);
free_req(pending_req);
+ if (atomic_read(&pending_req->blkif->refcnt) <= 2) {
+ if (atomic_read(&pending_req->blkif->drain))
+ complete(&pending_req->blkif->drain_complete);
+ }
}
}
@@ -574,7 +600,6 @@ do_block_io_op(struct xen_blkif *blkif)
return more_to_do;
}
-
/*
* Transmutation of the 'struct blkif_request' to a proper 'struct bio'
* and call the 'submit_bio' to pass it to the underlying storage.
@@ -591,6 +616,7 @@ static int dispatch_rw_block_io(struct xen_blkif *blkif,
int i, nbio = 0;
int operation;
struct blk_plug plug;
+ bool drain = false;
switch (req->operation) {
case BLKIF_OP_READ:
@@ -601,6 +627,8 @@ static int dispatch_rw_block_io(struct xen_blkif *blkif,
blkif->st_wr_req++;
operation = WRITE_ODIRECT;
break;
+ case BLKIF_OP_WRITE_BARRIER:
+ drain = true;
case BLKIF_OP_FLUSH_DISKCACHE:
blkif->st_f_req++;
operation = WRITE_FLUSH;
@@ -609,7 +637,6 @@ static int dispatch_rw_block_io(struct xen_blkif *blkif,
blkif->st_ds_req++;
operation = REQ_DISCARD;
break;
- case BLKIF_OP_WRITE_BARRIER:
default:
operation = 0; /* make gcc happy */
goto fail_response;
@@ -668,6 +695,12 @@ static int dispatch_rw_block_io(struct xen_blkif *blkif,
}
}
+ /* Wait on all outstanding I/O's and once that has been completed
+ * issue the WRITE_FLUSH.
+ */
+ if (drain)
+ xen_blk_drain_io(pending_req->blkif);
+
/*
* If we have failed at this point, we need to undo the M2P override,
* set gnttab_set_unmap_op on all of the grant references and perform
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 1b1bc44..e638457 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -181,6 +181,9 @@ struct xen_blkif {
atomic_t refcnt;
wait_queue_head_t wq;
+ /* for barrier (drain) requests */
+ struct completion drain_complete;
+ atomic_t drain;
/* One thread per one blkif. */
struct task_struct *xenblkd;
unsigned int waiting_reqs;
@@ -229,6 +232,8 @@ int xen_blkif_schedule(void *arg);
int xen_blkbk_flush_diskcache(struct xenbus_transaction xbt,
struct backend_info *be, int state);
+int xen_blkbk_barrier(struct xenbus_transaction xbt,
+ struct backend_info *be, int state);
struct xenbus_device *xen_blkbk_xenbus(struct backend_info *be);
static inline void blkif_get_x86_32_req(struct blkif_request *dst,
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index 1c44b32..a6d4303 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -114,6 +114,8 @@ static struct xen_blkif *xen_blkif_alloc(domid_t domid)
spin_lock_init(&blkif->blk_ring_lock);
atomic_set(&blkif->refcnt, 1);
init_waitqueue_head(&blkif->wq);
+ init_completion(&blkif->drain_complete);
+ atomic_set(&blkif->drain, 0);
blkif->st_print = jiffies;
init_waitqueue_head(&blkif->waiting_to_free);
@@ -474,6 +476,19 @@ kfree:
out:
return err;
}
+int xen_blkbk_barrier(struct xenbus_transaction xbt,
+ struct backend_info *be, int state)
+{
+ struct xenbus_device *dev = be->dev;
+ int err;
+
+ err = xenbus_printf(xbt, dev->nodename, "feature-barrier",
+ "%d", state);
+ if (err)
+ xenbus_dev_fatal(dev, err, "writing feature-barrier");
+
+ return err;
+}
/*
* Entry point to this code when a new device is created. Allocate the basic
@@ -708,6 +723,9 @@ again:
err = xen_blkbk_discard(xbt, be);
+ /* If we can't advertise it is OK. */
+ err = xen_blkbk_barrier(xbt, be, be->blkif->vbd.flush_support);
+
err = xenbus_printf(xbt, dev->nodename, "sectors", "%llu",
(unsigned long long)vbd_sz(&be->blkif->vbd));
if (err) {
--
1.7.5.4
next prev parent reply other threads:[~2011-10-10 15:28 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-10 15:28 [PATCH] Xen block fixes, secure discard, and barrier support for 3.2 (v1) Konrad Rzeszutek Wilk
2011-10-10 15:28 ` Konrad Rzeszutek Wilk [this message]
2011-10-17 11:36 ` [PATCH 1/3] xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests Jan Beulich
2011-10-17 16:50 ` Konrad Rzeszutek Wilk
2011-10-17 12:27 ` Jan Beulich
2011-10-17 16:52 ` Konrad Rzeszutek Wilk
2011-10-10 15:28 ` [PATCH 2/3] xen/blkback: Fix the inhibition to map pages when discarding sector ranges Konrad Rzeszutek Wilk
2011-10-11 7:25 ` Jan Beulich
[not found] ` <4E940B99020000780005AA12@victor.provo.novell.com>
2011-10-11 7:33 ` Li Dongyang
2011-10-11 18:39 ` [Xen-devel] " Konrad Rzeszutek Wilk
2011-10-11 20:50 ` Konrad Rzeszutek Wilk
2011-10-12 10:18 ` Jan Beulich
2011-10-12 10:30 ` Ian Campbell
2011-10-10 15:28 ` [PATCH 3/3] xen/blk[front|back]: Enhance discard support with secure erasing support Konrad Rzeszutek Wilk
2011-10-10 16:13 ` [Xen-devel] " Ian Campbell
2011-10-10 16:42 ` Konrad Rzeszutek Wilk
2011-10-10 17:53 ` Konrad Rzeszutek Wilk
2011-10-10 19:19 ` Ian Campbell
2011-10-10 19:20 ` Ian Campbell
2011-10-10 19:57 ` Konrad Rzeszutek Wilk
2011-10-11 7:36 ` Jan Beulich
2011-10-11 8:09 ` Ian Campbell
2011-10-11 15:51 ` Konrad Rzeszutek Wilk
2011-10-11 20:57 ` Konrad Rzeszutek Wilk
2011-10-12 10:54 ` Ian Campbell
2011-10-12 15:45 ` Konrad Rzeszutek Wilk
2011-10-12 16:14 ` Ian Campbell
2011-10-12 17:21 ` Konrad Rzeszutek Wilk
2011-10-17 13:23 ` Jan Beulich
2011-10-21 0:06 ` Konrad Rzeszutek Wilk
[not found] ` <4E9C4855020000780005BA73@victor.provo.novell.com>
2011-10-20 3:17 ` Li Dongyang
2011-10-20 3:46 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318260494-27985-2-git-send-email-konrad.wilk@oracle.com \
--to=konrad.wilk@oracle.com \
--cc=JBeulich@novell.com \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®