mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Liam Girdwood <lrg@ti.com>, Samuel Ortiz <samuel.ortiz@intel.com>,
	Dmitry Torokhov <dtor@mail.ru>
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
	alsa-devel@alsa-project.org,
	Misael Lopez Cruz <misael.lopez@ti.com>
Subject: [PATCH v3 5/5] ASoC: twl6040: Support for vibra output paths
Date: Wed, 12 Oct 2011 11:57:57 +0300	[thread overview]
Message-ID: <1318409877-21681-6-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1318409877-21681-1-git-send-email-peter.ujfalusi@ti.com>

twl6040 have two vibra output drivers.
They can be operated with audio stream coming through
the PDM interface (fifth channel).
The vibra outputs can be controlled via the input/FF
driver as well.
Selection between the two mode is implemented within
the codec driver, the input/FF driver can only operate if
the routing is set to "Input FF".
Changing from "Input FF" to "Audio PDM" mode is protected
as well: The switchin can only be done, if there is no
running effect from the input/FF.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/codecs/twl6040.c |   72 ++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 72 insertions(+), 0 deletions(-)

diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 93f8a59..8648498 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -803,6 +803,23 @@ static int twl6040_get_volsw(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int twl6040_soc_dapm_put_vibra_enum(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_dapm_widget_list *wlist = snd_kcontrol_chip(kcontrol);
+	struct snd_soc_dapm_widget *widget = wlist->widgets[0];
+	struct snd_soc_codec *codec = widget->codec;
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+	unsigned int val;
+
+	/* Do not allow changes while Input/FF efect is running */
+	val = twl6040_read_reg_volatile(codec, e->reg);
+	if (val & TWL6040_VIBENA && !(val & TWL6040_VIBSEL))
+		return -EBUSY;
+
+	return snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+}
+
 /*
  * MICATT volume control:
  * from -6 to 0 dB in 6 dB steps
@@ -874,6 +891,19 @@ static const struct soc_enum twl6040_hf_enum[] = {
 			twl6040_hf_texts),
 };
 
+static const char *twl6040_vibrapath_texts[] = {
+	"Input FF", "Audio PDM"
+};
+
+static const struct soc_enum twl6040_vibra_enum[] = {
+	SOC_ENUM_SINGLE(TWL6040_REG_VIBCTLL, 1,
+			ARRAY_SIZE(twl6040_vibrapath_texts),
+			twl6040_vibrapath_texts),
+	SOC_ENUM_SINGLE(TWL6040_REG_VIBCTLR, 1,
+			ARRAY_SIZE(twl6040_vibrapath_texts),
+			twl6040_vibrapath_texts),
+};
+
 static const struct snd_kcontrol_new amicl_control =
 	SOC_DAPM_ENUM("Route", twl6040_enum[0]);
 
@@ -903,6 +933,17 @@ static const struct snd_kcontrol_new auxl_switch_control =
 static const struct snd_kcontrol_new auxr_switch_control =
 	SOC_DAPM_SINGLE("Switch", TWL6040_REG_HFRCTL, 6, 1, 0);
 
+/* Vibra playback switches */
+static const struct snd_kcontrol_new vibral_mux_controls =
+	SOC_DAPM_ENUM_EXT("Route", twl6040_vibra_enum[0],
+		snd_soc_dapm_get_enum_double,
+		twl6040_soc_dapm_put_vibra_enum);
+
+static const struct snd_kcontrol_new vibrar_mux_controls =
+	SOC_DAPM_ENUM_EXT("Route", twl6040_vibra_enum[1],
+		snd_soc_dapm_get_enum_double,
+		twl6040_soc_dapm_put_vibra_enum);
+
 /* Headset power mode */
 static const char *twl6040_power_mode_texts[] = {
 	"Low-Power", "High-Perfomance",
@@ -1024,6 +1065,8 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("EP"),
 	SND_SOC_DAPM_OUTPUT("AUXL"),
 	SND_SOC_DAPM_OUTPUT("AUXR"),
+	SND_SOC_DAPM_OUTPUT("VIBRAL"),
+	SND_SOC_DAPM_OUTPUT("VIBRAR"),
 
 	/* Analog input muxes for the capture amplifiers */
 	SND_SOC_DAPM_MUX("Analog Left Capture Route",
@@ -1076,6 +1119,9 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 			TWL6040_REG_HFRCTL, 0, 0,
 			twl6040_power_mode_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+	/* Virtual DAC for vibra path (DL4 channel) */
+	SND_SOC_DAPM_DAC("VIBRA DAC", "Vibra Playback",
+			SND_SOC_NOPM, 0, 0),
 
 	SND_SOC_DAPM_MUX("Handsfree Left Playback",
 			SND_SOC_NOPM, 0, 0, &hfl_mux_controls),
@@ -1087,6 +1133,11 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 	SND_SOC_DAPM_MUX("Headset Right Playback",
 			SND_SOC_NOPM, 0, 0, &hsr_mux_controls),
 
+	SND_SOC_DAPM_MUX("Vibra Left Playback", SND_SOC_NOPM, 0, 0,
+			&vibral_mux_controls),
+	SND_SOC_DAPM_MUX("Vibra Right Playback", SND_SOC_NOPM, 0, 0,
+			&vibrar_mux_controls),
+
 	SND_SOC_DAPM_SWITCH("Earphone Playback", SND_SOC_NOPM, 0, 0,
 			&ep_path_enable_control),
 	SND_SOC_DAPM_SWITCH("AUXL Playback", SND_SOC_NOPM, 0, 0,
@@ -1115,6 +1166,15 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 			TWL6040_REG_EARCTL, 0, 0, NULL, 0,
 			twl6040_power_mode_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_OUT_DRV("Vibra Left Driver",
+			TWL6040_REG_VIBCTLL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_OUT_DRV("Vibra Right Driver",
+			TWL6040_REG_VIBCTLR, 0, 0, NULL, 0),
+
+	SND_SOC_DAPM_SUPPLY("Vibra Left Control", TWL6040_REG_VIBCTLL, 2, 0,
+			    NULL, 0),
+	SND_SOC_DAPM_SUPPLY("Vibra Right Control", TWL6040_REG_VIBCTLR, 2, 0,
+			    NULL, 0),
 
 	/* Analog playback PGAs */
 	SND_SOC_DAPM_PGA("HF Left PGA",
@@ -1181,6 +1241,18 @@ static const struct snd_soc_dapm_route intercon[] = {
 
 	{"AUXL", NULL, "AUXL Playback"},
 	{"AUXR", NULL, "AUXR Playback"},
+
+	/* Vibrator paths */
+	{"Vibra Left Playback", "Audio PDM", "VIBRA DAC"},
+	{"Vibra Right Playback", "Audio PDM", "VIBRA DAC"},
+
+	{"Vibra Left Driver", NULL, "Vibra Left Playback"},
+	{"Vibra Right Driver", NULL, "Vibra Right Playback"},
+	{"Vibra Left Driver", NULL, "Vibra Left Control"},
+	{"Vibra Right Driver", NULL, "Vibra Right Control"},
+
+	{"VIBRAL", NULL, "Vibra Left Driver"},
+	{"VIBRAR", NULL, "Vibra Right Driver"},
 };
 
 static int twl6040_set_bias_level(struct snd_soc_codec *codec,
-- 
1.7.7


  parent reply	other threads:[~2011-10-12  8:58 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-12  8:57 [PATCH v3 0/5] ASoC/MFD/Input: twl6040: Support for audio driven vibra Peter Ujfalusi
2011-10-12  8:57 ` [PATCH v3 1/5] Input: twl6040: Simplify vibra regsiter definitions Peter Ujfalusi
2011-10-12  8:57 ` [PATCH v3 2/5] MFD: twl6040: Cache the vibra control registers Peter Ujfalusi
2011-10-12  8:57 ` [PATCH v3 3/5] MFD: twl6040: function to query the vibra status for clients Peter Ujfalusi
2011-10-12  8:57 ` [PATCH v3 4/5] Input: twl6040-vibra: Check the selected path for vibra Peter Ujfalusi
2011-10-12  8:57 ` Peter Ujfalusi [this message]
2011-10-12 10:49 ` [PATCH v3 0/5] ASoC/MFD/Input: twl6040: Support for audio driven vibra Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1318409877-21681-6-git-send-email-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=dtor@mail.ru \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@ti.com \
    --cc=misael.lopez@ti.com \
    --cc=samuel.ortiz@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®