From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933451Ab1JNV55 (ORCPT ); Fri, 14 Oct 2011 17:57:57 -0400 Received: from mail09.linbit.com ([212.69.161.110]:60869 "EHLO mail09.linbit.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751704Ab1JNV5z (ORCPT ); Fri, 14 Oct 2011 17:57:55 -0400 From: Philipp Reisner To: linux-kernel@vger.kernel.org, Jens Axboe Cc: drbd-dev@lists.linbit.com Subject: [PATCH 03/11] drbd: Changed some defaults Date: Fri, 14 Oct 2011 23:57:44 +0200 Message-Id: <1318629472-11110-4-git-send-email-philipp.reisner@linbit.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1318629472-11110-1-git-send-email-philipp.reisner@linbit.com> References: <1318629472-11110-1-git-send-email-philipp.reisner@linbit.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org * Enabled the resync controller, with a fill target of 50Kib. That gives reasonable resync speeds without tuning. A much better default than the 250KiB/s fixed. * Enable bitmap compression. It is save to use, and most people have more CPU power than network bandwidth. * ko-count of 7: Abort a connection if the peer fails to process a write request within 42 seconds. * al-extents of 1237: ~5 GiB seems to be a much more sane default these days. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- include/linux/drbd_limits.h | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-) diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h index 425010a..3fc554b 100644 --- a/include/linux/drbd_limits.h +++ b/include/linux/drbd_limits.h @@ -16,7 +16,7 @@ #define DEBUG_RANGE_CHECK 0 #define DRBD_MINOR_COUNT_MIN 1 -#define DRBD_MINOR_COUNT_MAX 256 +#define DRBD_MINOR_COUNT_MAX (1U << 20) #define DRBD_MINOR_COUNT_DEF 32 #define DRBD_VOLUME_MAX 65535 @@ -99,7 +99,7 @@ * 200 should be more than enough even for very short timeouts */ #define DRBD_KO_COUNT_MIN 0 #define DRBD_KO_COUNT_MAX 200 -#define DRBD_KO_COUNT_DEF 0 +#define DRBD_KO_COUNT_DEF 7 /* } */ /* syncer { */ @@ -117,7 +117,7 @@ * 919 * 7 = 6433 */ #define DRBD_AL_EXTENTS_MIN 7 #define DRBD_AL_EXTENTS_MAX 6433 -#define DRBD_AL_EXTENTS_DEF 127 +#define DRBD_AL_EXTENTS_DEF 1237 #define DRBD_MINOR_NUMBER_MIN -1 #define DRBD_MINOR_NUMBER_MAX (1<<30) @@ -151,7 +151,7 @@ #define DRBD_C_PLAN_AHEAD_MIN 0 #define DRBD_C_PLAN_AHEAD_MAX 300 -#define DRBD_C_PLAN_AHEAD_DEF 0 /* RS rate controller disabled by default */ +#define DRBD_C_PLAN_AHEAD_DEF 20 #define DRBD_C_DELAY_TARGET_MIN 1 #define DRBD_C_DELAY_TARGET_MAX 100 @@ -159,7 +159,7 @@ #define DRBD_C_FILL_TARGET_MIN 0 #define DRBD_C_FILL_TARGET_MAX (1<<20) /* 500MByte in sec */ -#define DRBD_C_FILL_TARGET_DEF 0 /* By default disabled -> controlled by delay_target */ +#define DRBD_C_FILL_TARGET_DEF 100 /* Try to place 50KiB in socket send buffer during resync */ #define DRBD_C_MAX_RATE_MIN 250 /* kByte/sec */ #define DRBD_C_MAX_RATE_MAX (4 << 20) @@ -167,7 +167,7 @@ #define DRBD_C_MIN_RATE_MIN 0 /* kByte/sec */ #define DRBD_C_MIN_RATE_MAX (4 << 20) -#define DRBD_C_MIN_RATE_DEF 4096 +#define DRBD_C_MIN_RATE_DEF 250 #define DRBD_CONG_FILL_MIN 0 #define DRBD_CONG_FILL_MAX (10<<21) /* 10GByte in sectors */ @@ -187,6 +187,6 @@ #define DRBD_ALLOW_TWO_PRIMARIES_DEF 0 #define DRBD_ALWAYS_ASBP_DEF 0 -#define DRBD_USE_RLE_DEF 0 +#define DRBD_USE_RLE_DEF 1 #endif -- 1.7.4.1