From: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
To: gregkh@suse.de, wfp5p@virginia.edu
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Ravishankar Karkala Mallikarjunayya
<ravishankar.km@greenturtles.in>
Subject: [PATCH 22/24] Staging: comedi: fix printk issue in das1800.c
Date: Wed, 19 Oct 2011 17:34:56 +0530 [thread overview]
Message-ID: <1319025898-10864-2-git-send-email-ravishankar.km@greenturtles.in> (raw)
In-Reply-To: <1319025898-10864-1-git-send-email-ravishankar.km@greenturtles.in>
This is a patch to the das1800.c file that fixes up a printk
warning found by the checkpatch.pl tool
Converted printks to dev_printk.
Removed unnecessary printk statements.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
---
drivers/staging/comedi/drivers/das1800.c | 90 +++++++++++++-----------------
1 files changed, 39 insertions(+), 51 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index a6df30b..354ddc7 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -573,22 +573,23 @@ static int das1800_init_dma(struct comedi_device *dev, unsigned int dma0,
devpriv->dma_bits |= DMA_CH7_CH5;
break;
default:
- printk(" only supports dma channels 5 through 7\n"
- " Dual dma only allows the following combinations:\n"
- " dma 5,6 / 6,7 / or 7,5\n");
+ dev_err(dev->hw_dev, " only supports dma channels 5 through 7\n"
+ " Dual dma only allows the following combinations:\n"
+ " dma 5,6 / 6,7 / or 7,5\n");
return -EINVAL;
break;
}
if (request_dma(dma0, driver_das1800.driver_name)) {
- printk(" failed to allocate dma channel %i\n", dma0);
+ dev_err(dev->hw_dev, "failed to allocate dma channel %i\n",
+ dma0);
return -EINVAL;
}
devpriv->dma0 = dma0;
devpriv->dma_current = dma0;
if (dma1) {
if (request_dma(dma1, driver_das1800.driver_name)) {
- printk(" failed to allocate dma channel %i\n",
- dma1);
+ dev_err(dev->hw_dev, "failed to allocate dma channel %i\n",
+ dma1);
return -EINVAL;
}
devpriv->dma1 = dma1;
@@ -631,35 +632,31 @@ static int das1800_attach(struct comedi_device *dev,
if (alloc_private(dev, sizeof(struct das1800_private)) < 0)
return -ENOMEM;
- printk("comedi%d: %s: io 0x%lx", dev->minor, driver_das1800.driver_name,
- iobase);
if (irq) {
- printk(", irq %u", irq);
+ dev_dbg(dev->hw_dev, "irq %u\n", irq);
if (dma0) {
- printk(", dma %u", dma0);
+ dev_dbg(dev->hw_dev, "dma %u\n", dma0);
if (dma1)
- printk(" and %u", dma1);
+ dev_dbg(dev->hw_dev, "and %u\n", dma1);
}
}
- printk("\n");
if (iobase == 0) {
- printk(" io base address required\n");
+ dev_err(dev->hw_dev, "io base address required\n");
return -EINVAL;
}
/* check if io addresses are available */
if (!request_region(iobase, DAS1800_SIZE, driver_das1800.driver_name)) {
- printk
- (" I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
- iobase, iobase + DAS1800_SIZE - 1);
+ dev_err(dev->hw_dev, "I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
+ iobase, iobase + DAS1800_SIZE - 1);
return -EIO;
}
dev->iobase = iobase;
board = das1800_probe(dev);
if (board < 0) {
- printk(" unable to determine board type\n");
+ dev_err(dev->hw_dev, "unable to determine board type\n");
return -ENODEV;
}
@@ -671,9 +668,8 @@ static int das1800_attach(struct comedi_device *dev,
iobase2 = iobase + IOBASE2;
if (!request_region(iobase2, DAS1800_SIZE,
driver_das1800.driver_name)) {
- printk
- (" I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
- iobase2, iobase2 + DAS1800_SIZE - 1);
+ dev_err(dev->hw_dev, "I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
+ iobase2, iobase2 + DAS1800_SIZE - 1);
return -EIO;
}
devpriv->iobase2 = iobase2;
@@ -683,7 +679,8 @@ static int das1800_attach(struct comedi_device *dev,
if (irq) {
if (request_irq(irq, das1800_interrupt, 0,
driver_das1800.driver_name, dev)) {
- printk(" unable to allocate irq %u\n", irq);
+ dev_err(dev->hw_dev, "unable to allocate irq %u\n",
+ irq);
return -EINVAL;
}
}
@@ -712,7 +709,7 @@ static int das1800_attach(struct comedi_device *dev,
devpriv->irq_dma_bits |= 0x38;
break;
default:
- printk(" irq out of range\n");
+ dev_err(dev->hw_dev, "irq out of range\n");
return -EINVAL;
break;
}
@@ -813,9 +810,6 @@ static int das1800_detach(struct comedi_device *dev)
kfree(devpriv->ai_buf1);
}
- printk("comedi%d: %s: remove\n", dev->minor,
- driver_das1800.driver_name);
-
return 0;
};
@@ -833,69 +827,63 @@ static int das1800_probe(struct comedi_device *dev)
case 0x3:
if (board == das1801st_da || board == das1802st_da ||
board == das1701st_da || board == das1702st_da) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk
- (" Board model (probed, not recommended): das-1800st-da series\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1800st-da series\n");
return das1801st;
break;
case 0x4:
if (board == das1802hr_da || board == das1702hr_da) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk
- (" Board model (probed, not recommended): das-1802hr-da\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1802hr-da\n");
return das1802hr;
break;
case 0x5:
if (board == das1801ao || board == das1802ao ||
board == das1701ao || board == das1702ao) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk
- (" Board model (probed, not recommended): das-1800ao series\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1800ao series\n");
return das1801ao;
break;
case 0x6:
if (board == das1802hr || board == das1702hr) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk(" Board model (probed, not recommended): das-1802hr\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1802hr\n");
return das1802hr;
break;
case 0x7:
if (board == das1801st || board == das1802st ||
board == das1701st || board == das1702st) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk
- (" Board model (probed, not recommended): das-1800st series\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1800st series\n");
return das1801st;
break;
case 0x8:
if (board == das1801hc || board == das1802hc) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk
- (" Board model (probed, not recommended): das-1800hc series\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1800hc series\n");
return das1801hc;
break;
default:
- printk
- (" Board model: probe returned 0x%x (unknown, please report)\n",
- id);
+ dev_dbg(dev->hw_dev, "Board model: probe returned 0x%x (unknown, please report)\n",
+ id);
return board;
break;
}
--
1.7.6.4
next prev parent reply other threads:[~2011-10-19 12:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-19 12:04 [PATCH 21/24] Staging: comedi: fix warning issue in cb_das16_cs.c Ravishankar Karkala Mallikarjunayya
2011-10-19 12:04 ` Ravishankar Karkala Mallikarjunayya [this message]
2011-10-19 12:04 ` [PATCH 23/24] Staging: comedi: fix printk issue in adv_pci1710.c Ravishankar Karkala Mallikarjunayya
2011-10-19 12:04 ` [PATCH 24/24] Staging: comedi: fix code cleanup in daqboard2000.c Ravishankar Karkala Mallikarjunayya
2011-10-19 20:06 ` [PATCH 21/24] Staging: comedi: fix warning issue in cb_das16_cs.c Greg KH
2011-10-20 6:18 [PATCH 01/24] Staging: comedi: fix printk issue in das6402.c Ravishankar Karkala Mallikarjunayya
2011-10-20 6:19 ` [PATCH 22/24] Staging: comedi: fix printk issue in das1800.c Ravishankar Karkala Mallikarjunayya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1319025898-10864-2-git-send-email-ravishankar.km@greenturtles.in \
--to=ravishankar.km@greenturtles.in \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=wfp5p@virginia.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®