From: Cesar Eduardo Barros <cesarb@cesarb.net>
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
"David S. Miller" <davem@davemloft.net>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
Realtek linux nic maintainers <nic_swsd@realtek.com>,
Francois Romieu <romieu@fr.zoreil.com>,
Jeff Garzik <jgarzik@pobox.com>, Donald Becker <becker@scyld.com>,
Cesar Eduardo Barros <cesarb@cesarb.net>
Subject: [PATCH] net/ethernet: sc92031 is not Realtek
Date: Tue, 25 Oct 2011 20:32:24 -0200 [thread overview]
Message-ID: <1319581944-2707-1-git-send-email-cesarb@cesarb.net> (raw)
While the SC92031 could be found on fake "Realtek" NICs, it has no
relationship to Realtek, and is actually from Silan.
Create a new subdirectory for silan and move sc92031 there.
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
---
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/realtek/Kconfig | 12 -------
drivers/net/ethernet/realtek/Makefile | 1 -
drivers/net/ethernet/silan/Kconfig | 33 +++++++++++++++++++++
drivers/net/ethernet/silan/Makefile | 5 +++
drivers/net/ethernet/{realtek => silan}/sc92031.c | 0
7 files changed, 40 insertions(+), 13 deletions(-)
create mode 100644 drivers/net/ethernet/silan/Kconfig
create mode 100644 drivers/net/ethernet/silan/Makefile
rename drivers/net/ethernet/{realtek => silan}/sc92031.c (100%)
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 6dff5a0..597f4d4 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -159,6 +159,7 @@ config S6GMAC
will be called s6gmac.
source "drivers/net/ethernet/seeq/Kconfig"
+source "drivers/net/ethernet/silan/Kconfig"
source "drivers/net/ethernet/sis/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
source "drivers/net/ethernet/sgi/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index c53ad3a..be5dde0 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_SH_ETH) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
obj-$(CONFIG_S6GMAC) += s6gmac.o
obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
+obj-$(CONFIG_NET_VENDOR_SILAN) += silan/
obj-$(CONFIG_NET_VENDOR_SIS) += sis/
obj-$(CONFIG_SFC) += sfc/
obj-$(CONFIG_NET_VENDOR_SGI) += sgi/
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 84083ec..0578859 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -115,16 +115,4 @@ config R8169
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
-config SC92031
- tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
- select CRC32
- ---help---
- This is a driver for the Fast Ethernet PCI network cards based on
- the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
- have one of these, say Y here.
-
- To compile this driver as a module, choose M here: the module
- will be called sc92031. This is recommended.
-
endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
index e48cfb6..71b1da3 100644
--- a/drivers/net/ethernet/realtek/Makefile
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -6,4 +6,3 @@ obj-$(CONFIG_8139CP) += 8139cp.o
obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_ATP) += atp.o
obj-$(CONFIG_R8169) += r8169.o
-obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/ethernet/silan/Kconfig b/drivers/net/ethernet/silan/Kconfig
new file mode 100644
index 0000000..ae1ce17
--- /dev/null
+++ b/drivers/net/ethernet/silan/Kconfig
@@ -0,0 +1,33 @@
+#
+# Silan device configuration
+#
+
+config NET_VENDOR_SILAN
+ bool "Silan devices"
+ default y
+ depends on PCI && EXPERIMENTAL
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Silan devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_SILAN
+
+config SC92031
+ tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+ have one of these, say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sc92031. This is recommended.
+
+endif # NET_VENDOR_SILAN
diff --git a/drivers/net/ethernet/silan/Makefile b/drivers/net/ethernet/silan/Makefile
new file mode 100644
index 0000000..4ad3523
--- /dev/null
+++ b/drivers/net/ethernet/silan/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Silan network device drivers.
+#
+
+obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/ethernet/realtek/sc92031.c b/drivers/net/ethernet/silan/sc92031.c
similarity index 100%
rename from drivers/net/ethernet/realtek/sc92031.c
rename to drivers/net/ethernet/silan/sc92031.c
--
1.7.6.4
next reply other threads:[~2011-10-25 22:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-25 22:32 Cesar Eduardo Barros [this message]
2011-11-01 23:33 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1319581944-2707-1-git-send-email-cesarb@cesarb.net \
--to=cesarb@cesarb.net \
--cc=becker@scyld.com \
--cc=davem@davemloft.net \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®