From: Daniel J Blueman <daniel@numascale-asia.com>
To: Jesse Barnes <jbarnes@virtuousgeek.org>,
Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>, H Peter Anvin <hpa@zytor.com>,
Steffen Persvold <sp@numascale.com>,
linux-kernel@vger.kernel.org, x86@kernel.org,
Daniel J Blueman <daniel@numascale-asia.com>
Subject: [PATCH 3/3] Add NumaChip quirk
Date: Wed, 26 Oct 2011 14:07:10 +0800 [thread overview]
Message-ID: <1319609230-18897-3-git-send-email-daniel@numascale-asia.com> (raw)
In-Reply-To: <1319609230-18897-1-git-send-email-daniel@numascale-asia.com>
From: Steffen Persvold <sp@numascale.com>
From: Steffen Persvold <sp@numascale.com>
Add quirk for Numascale's NumaChip to prevent resource conflicts.
v2:
- [Daniel] rediffed and validated against 3.1-rc10
Signed-off-by: Steffen Persvold <sp@numascale.com>
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
---
drivers/pci/quirks.c | 14 ++++++++++++++
include/linux/pci_ids.h | 4 ++++
2 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1196f61..051b793 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2679,6 +2679,20 @@ static void __devinit quirk_hotplug_bridge(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge);
+/* Clear all resources on NumaChip to avoid conflicts */
+static void __devinit numachip_resource_fixup(struct pci_dev *pdev)
+{
+ int i;
+
+ for (i = PCI_STD_RESOURCES; i <= PCI_ROM_RESOURCE; i++)
+ memset(&pdev->resource[i], 0, sizeof(pdev->resource[i]));
+
+ dev_notice(&pdev->dev, "Disabled all PCI resources for NumaChip\n");
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NUMASCALE,
+ PCI_DEVICE_ID_NUMASCALE_NUMACHIP0, numachip_resource_fixup);
+
/*
* This is a quirk for the Ricoh MMC controller found as a part of
* some mulifunction chips.
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ae96bbe..02e0959 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2400,6 +2400,10 @@
#define PCI_VENDOR_ID_AZWAVE 0x1a3b
+#define PCI_VENDOR_ID_NUMASCALE 0x1b47
+#define PCI_DEVICE_ID_NUMASCALE_NUMACHIP0 0x0601
+#define PCI_DEVICE_ID_NUMASCALE_NUMACHIP1 0x0602
+
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
--
1.7.5.4
next prev parent reply other threads:[~2011-10-26 6:08 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-26 6:07 [PATCH 1/3] Add Numachip APIC support Daniel J Blueman
2011-10-26 6:07 ` [PATCH 2/3] Add multi-node boot support Daniel J Blueman
2011-10-27 7:30 ` Ingo Molnar
2011-10-27 10:46 ` Steffen Persvold
2011-10-27 11:38 ` Ingo Molnar
2011-10-27 11:42 ` Steffen Persvold
2011-12-02 18:31 ` Daniel J Blueman
2011-12-05 8:20 ` [PATCH 1/3] Make flat_init_apic_ldr available Daniel J Blueman
2011-12-05 8:20 ` [PATCH 2/3] v2: Add x86_init platform override to fix up core numbering Daniel J Blueman
2011-12-05 17:58 ` [tip:x86/apic] x86: Add x86_init platform override to fix up NUMA " tip-bot for Daniel J Blueman
2011-12-06 6:30 ` [tip:x86/apic] x86: Fix the !CONFIG_NUMA build of the new CPU ID fixup code support tip-bot for Steffen Persvold
2011-12-05 8:20 ` [PATCH 3/3] v4: Add support for Numascale's NumaChip Daniel J Blueman
2011-12-05 9:10 ` Ingo Molnar
2011-12-05 9:49 ` Steffen Persvold
2011-12-05 16:07 ` [PATCH 3/3] v5: Add NumaChip support Daniel J Blueman
2011-12-05 17:59 ` [tip:x86/apic] x86: " tip-bot for Steffen Persvold
2011-12-05 20:31 ` Ingo Molnar
2011-12-06 0:10 ` Steffen Persvold
2011-12-06 5:50 ` Ingo Molnar
2011-12-06 6:09 ` Steffen Persvold
2011-12-08 22:35 ` Kevin Winchester
2011-12-09 1:24 ` Steffen Persvold
2011-12-09 7:22 ` Ingo Molnar
2011-12-10 1:52 ` Kevin Winchester
2011-12-10 2:28 ` Kevin Winchester
2011-12-18 9:44 ` Ingo Molnar
2011-12-19 0:12 ` [PATCH] x86: Simplify code by allowing more of struct cpuinfo_x86 for the !SMP case Kevin Winchester
2011-12-19 14:07 ` [tip:x86/apic] " tip-bot for Kevin Winchester
2011-12-19 18:47 ` Ingo Molnar
2011-12-21 0:52 ` [PATCH] " Kevin Winchester
2011-12-21 8:48 ` [tip:x86/apic] x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86' tip-bot for Kevin Winchester
2011-12-05 17:57 ` [tip:x86/apic] x86: Make flat_init_apic_ldr() available tip-bot for Daniel J Blueman
2011-10-26 6:07 ` Daniel J Blueman [this message]
2011-10-27 7:26 ` [PATCH 1/3] Add Numachip APIC support Ingo Molnar
2011-10-27 7:35 ` Ingo Molnar
2011-10-27 7:44 ` Ingo Molnar
2011-10-27 10:31 ` Steffen Persvold
-- strict thread matches above, loose matches on Subject: below --
2011-10-18 8:22 Daniel J Blueman
2011-10-18 8:22 ` [PATCH 3/3] Add NumaChip quirk Daniel J Blueman
2011-10-25 13:54 ` Thomas Gleixner
2011-10-25 14:17 ` Jesse Barnes
2011-10-26 3:12 ` Daniel J Blueman
2011-10-25 14:38 ` Bjorn Helgaas
2011-10-25 15:36 ` Steffen Persvold
2011-10-25 17:15 ` Bjorn Helgaas
2011-10-25 17:33 ` Steffen Persvold
2011-10-25 18:09 ` Arne Georg Gleditsch
2011-10-25 20:03 ` Bjorn Helgaas
2011-10-25 19:57 ` Bjorn Helgaas
2011-07-22 10:44 [PATCH 1/3] Add Numachip APIC support Daniel J Blueman
2011-07-22 10:44 ` [PATCH 3/3] Add NumaChip quirk Daniel J Blueman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1319609230-18897-3-git-send-email-daniel@numascale-asia.com \
--to=daniel@numascale-asia.com \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=sp@numascale.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®