From: Rajendra Nayak <rnayak@ti.com>
To: <broonie@opensource.wolfsonmicro.com>,
<grant.likely@secretlab.ca>, <robherring2@gmail.com>
Cc: <devicetree-discuss@lists.ozlabs.org>,
<linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <tony@atomide.com>,
<lrg@ti.com>, <b-cousson@ti.com>, <patches@linaro.org>,
<linux-kernel@vger.kernel.org>, <shawn.guo@freescale.com>,
<linaro-dev@lists.linaro.org>, <olof@lixom.net>,
Rajendra Nayak <rnayak@ti.com>
Subject: [PATCH v5 0/4] Device tree support for regulators
Date: Fri, 18 Nov 2011 16:47:16 +0530 [thread overview]
Message-ID: <1321615040-13257-1-git-send-email-rnayak@ti.com> (raw)
v5 is based on 3.2-rc2 and has the following changes
-1- Used microvolt/microamp in bindings instead of uV/uA
-2- Added more documentation surrounding regulator-consumer
mapping in the core bindings
-3- Dropped CONFIG_OF_REGULATOR and use just CONFIG_OF
-4- Reused core regulator bindings on Fixed regulator bindings
-5- Corrected the gpio binding for Fixed regulator
The patches can be found here:
git://gitorious.org/omap-pm/linux.git for-dt/regulator
For the first 2 patches (1/4 and 2/4) I have dropped
Acks from Mark, since they have changed to some extent
from the last post and retained the Acks recieved on the
last 2 patches (3/4 and 4/4) as they remain unchanged.
regards,
Rajendra
Rajendra Nayak (4):
regulator: helper routine to extract regulator_init_data
regulator: adapt fixed regulator driver to dt
regulator: pass additional of_node to regulator_register()
regulator: map consumer regulator based on device tree
.../bindings/regulator/fixed-regulator.txt | 29 +++++++
.../devicetree/bindings/regulator/regulator.txt | 54 +++++++++++++
drivers/regulator/88pm8607.c | 2 +-
drivers/regulator/Makefile | 1 +
drivers/regulator/aat2870-regulator.c | 2 +-
drivers/regulator/ab3100.c | 2 +-
drivers/regulator/ab8500.c | 2 +-
drivers/regulator/ad5398.c | 2 +-
drivers/regulator/bq24022.c | 2 +-
drivers/regulator/core.c | 82 ++++++++++++++++---
drivers/regulator/da903x.c | 2 +-
drivers/regulator/db8500-prcmu.c | 2 +-
drivers/regulator/dummy.c | 2 +-
drivers/regulator/fixed.c | 62 +++++++++++++++-
drivers/regulator/isl6271a-regulator.c | 2 +-
drivers/regulator/lp3971.c | 2 +-
drivers/regulator/lp3972.c | 2 +-
drivers/regulator/max1586.c | 2 +-
drivers/regulator/max8649.c | 2 +-
drivers/regulator/max8660.c | 2 +-
drivers/regulator/max8925-regulator.c | 2 +-
drivers/regulator/max8952.c | 2 +-
drivers/regulator/max8997.c | 2 +-
drivers/regulator/max8998.c | 2 +-
drivers/regulator/mc13783-regulator.c | 2 +-
drivers/regulator/mc13892-regulator.c | 2 +-
drivers/regulator/of_regulator.c | 81 +++++++++++++++++++
drivers/regulator/pcap-regulator.c | 2 +-
drivers/regulator/pcf50633-regulator.c | 2 +-
drivers/regulator/tps6105x-regulator.c | 3 +-
drivers/regulator/tps65023-regulator.c | 2 +-
drivers/regulator/tps6507x-regulator.c | 2 +-
drivers/regulator/tps6524x-regulator.c | 2 +-
drivers/regulator/tps6586x-regulator.c | 2 +-
drivers/regulator/tps65910-regulator.c | 2 +-
drivers/regulator/tps65912-regulator.c | 2 +-
drivers/regulator/twl-regulator.c | 2 +-
drivers/regulator/wm831x-dcdc.c | 8 +-
drivers/regulator/wm831x-isink.c | 2 +-
drivers/regulator/wm831x-ldo.c | 6 +-
drivers/regulator/wm8350-regulator.c | 2 +-
drivers/regulator/wm8400-regulator.c | 2 +-
drivers/regulator/wm8994-regulator.c | 2 +-
include/linux/regulator/driver.h | 4 +-
include/linux/regulator/of_regulator.h | 20 +++++
sound/soc/codecs/sgtl5000.c | 2 +-
46 files changed, 362 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/fixed-regulator.txt
create mode 100644 Documentation/devicetree/bindings/regulator/regulator.txt
create mode 100644 drivers/regulator/of_regulator.c
create mode 100644 include/linux/regulator/of_regulator.h
next reply other threads:[~2011-11-18 11:18 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-18 11:17 Rajendra Nayak [this message]
2011-11-18 11:17 ` [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data Rajendra Nayak
2011-12-04 13:21 ` Thomas Abraham
2011-12-04 15:54 ` Mark Brown
2011-12-05 9:10 ` Thomas Abraham
2011-12-05 10:34 ` Mark Brown
2011-12-05 10:44 ` Thomas Abraham
2011-12-05 10:57 ` Mark Brown
2011-12-05 11:09 ` Thomas Abraham
2011-12-06 6:54 ` Rajendra Nayak
2012-05-23 17:48 ` David Brown
2011-11-18 11:17 ` [PATCH v5 2/4] regulator: adapt fixed regulator driver to dt Rajendra Nayak
2011-11-18 11:17 ` [PATCH v5 3/4] regulator: pass additional of_node to regulator_register() Rajendra Nayak
2011-12-04 9:53 ` Thomas Abraham
2011-12-05 7:19 ` Rajendra Nayak
2011-11-18 11:17 ` [PATCH v5 4/4] regulator: map consumer regulator based on device tree Rajendra Nayak
2011-11-23 18:44 ` Mark Brown
2011-11-23 19:01 ` [PATCH v5 0/4] Device tree support for regulators Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321615040-13257-1-git-send-email-rnayak@ti.com \
--to=rnayak@ti.com \
--cc=b-cousson@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linaro-dev@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=olof@lixom.net \
--cc=patches@linaro.org \
--cc=robherring2@gmail.com \
--cc=shawn.guo@freescale.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®