From: Lars-Peter Clausen <lars@metafoo.de>
To: <linux-kernel@vger.kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
"open list:SERIAL DRIVERS" <linux-serial@vger.kernel.org>
Subject: [PATCH 02/11] TTY: Remove redundant spi driver bus initialization
Date: Thu, 24 Nov 2011 16:29:12 +0100 [thread overview]
Message-ID: <1322148561-25138-2-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1322148561-25138-1-git-send-email-lars@metafoo.de>
In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.
The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
.driver = {
- .bus = &spi_bus_type,
},
};
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Alan Cox <alan@linux.intel.com> (maintainer:SERIAL DRIVERS)
Cc: linux-serial@vger.kernel.org (open list:SERIAL DRIVERS)
---
drivers/tty/serial/ifx6x60.c | 1 -
drivers/tty/serial/max3100.c | 1 -
drivers/tty/serial/max3107-aava.c | 1 -
drivers/tty/serial/max3107.c | 1 -
drivers/tty/serial/mrst_max3110.c | 1 -
5 files changed, 0 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 426434e..7e925e2 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1334,7 +1334,6 @@ MODULE_DEVICE_TABLE(spi, ifx_id_table);
static const struct spi_driver ifx_spi_driver = {
.driver = {
.name = DRVNAME,
- .bus = &spi_bus_type,
.pm = &ifx_spi_pm,
.owner = THIS_MODULE},
.probe = ifx_spi_spi_probe,
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 8a6cc8c..b4902b9 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -901,7 +901,6 @@ static int max3100_resume(struct spi_device *spi)
static struct spi_driver max3100_driver = {
.driver = {
.name = "max3100",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c
index 90c40f2..aae772a 100644
--- a/drivers/tty/serial/max3107-aava.c
+++ b/drivers/tty/serial/max3107-aava.c
@@ -315,7 +315,6 @@ static int __devinit max3107_probe_aava(struct spi_device *spi)
static struct spi_driver max3107_driver = {
.driver = {
.name = "aava-max3107",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = max3107_probe_aava,
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index 7827000..17c7ba8 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -1181,7 +1181,6 @@ static int max3107_probe_generic(struct spi_device *spi)
static struct spi_driver max3107_driver = {
.driver = {
.name = "max3107",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = max3107_probe_generic,
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 4c309e8..df2a224 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -876,7 +876,6 @@ static int __devexit serial_m3110_remove(struct spi_device *dev)
static struct spi_driver uart_max3110_driver = {
.driver = {
.name = "spi_max3111",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = serial_m3110_probe,
--
1.7.7.1
next prev parent reply other threads:[~2011-11-24 15:30 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-24 15:29 [PATCH 01/11] RTC: " Lars-Peter Clausen
2011-11-24 15:29 ` Lars-Peter Clausen [this message]
2011-11-27 4:17 ` [PATCH 02/11] TTY: " Greg KH
2011-11-24 15:29 ` [PATCH 03/11] Input: " Lars-Peter Clausen
2011-11-24 15:29 ` [PATCH 04/11] hwmon: " Lars-Peter Clausen
2011-11-25 9:58 ` Guenter Roeck
2011-11-25 13:02 ` Jean Delvare
2011-11-25 17:29 ` Guenter Roeck
2011-11-24 15:29 ` [PATCH 05/11] mfd: " Lars-Peter Clausen
2011-11-24 15:29 ` Mark Brown
2011-12-12 14:42 ` Samuel Ortiz
2011-11-24 15:29 ` [PATCH 06/11] mtd: " Lars-Peter Clausen
2011-12-01 7:58 ` Artem Bityutskiy
2011-11-24 15:29 ` [PATCH 07/11] mmc: " Lars-Peter Clausen
2011-12-01 18:39 ` Chris Ball
2011-11-24 15:29 ` [PATCH 08/11] blacklight: " Lars-Peter Clausen
2011-11-24 15:29 ` [PATCH 09/11] video: " Lars-Peter Clausen
2011-11-29 10:19 ` Tomi Valkeinen
2011-12-04 0:36 ` Florian Tobias Schandinat
2011-11-24 15:29 ` [PATCH 10/11] wireless: " Lars-Peter Clausen
2011-11-28 7:20 ` Luciano Coelho
2011-11-24 15:29 ` [PATCH 11/11] can: " Lars-Peter Clausen
2011-11-24 15:36 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1322148561-25138-2-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®