From: Lars-Peter Clausen <lars@metafoo.de>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Cc: <linux-kernel@vger.kernel.org>, <alsa-devel@alsa-project.org>,
<drivers@analog.com>, <device-drivers-devel@blackfin.uclinux.org>,
Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH 6/7] ASoC: AD193X: Use snd_soc_update_bits where appropriate
Date: Mon, 28 Nov 2011 17:28:11 +0100 [thread overview]
Message-ID: <1322497692-27868-6-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1322497692-27868-1-git-send-email-lars@metafoo.de>
We can reduce the code size here a bit by using snd_soc_update_bits instead of
open-coding the read-modify-write cycle. The conversion done in this patch is
not completely straightforward and some minor code restructuring has been
incorporated to further reduce the code size.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/codecs/ad193x.c | 96 +++++++++++++++++----------------------------
sound/soc/codecs/ad193x.h | 17 ++++----
2 files changed, 45 insertions(+), 68 deletions(-)
diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c
index c19e223..7d64f20 100644
--- a/sound/soc/codecs/ad193x.c
+++ b/sound/soc/codecs/ad193x.c
@@ -123,35 +123,29 @@ static int ad193x_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
unsigned int rx_mask, int slots, int width)
{
struct snd_soc_codec *codec = dai->codec;
- int dac_reg = snd_soc_read(codec, AD193X_DAC_CTRL1);
- int adc_reg = snd_soc_read(codec, AD193X_ADC_CTRL2);
-
- dac_reg &= ~AD193X_DAC_CHAN_MASK;
- adc_reg &= ~AD193X_ADC_CHAN_MASK;
+ unsigned int channels;
switch (slots) {
case 2:
- dac_reg |= AD193X_DAC_2_CHANNELS << AD193X_DAC_CHAN_SHFT;
- adc_reg |= AD193X_ADC_2_CHANNELS << AD193X_ADC_CHAN_SHFT;
+ channels = AD193X_2_CHANNELS;
break;
case 4:
- dac_reg |= AD193X_DAC_4_CHANNELS << AD193X_DAC_CHAN_SHFT;
- adc_reg |= AD193X_ADC_4_CHANNELS << AD193X_ADC_CHAN_SHFT;
+ channels = AD193X_4_CHANNELS;
break;
case 8:
- dac_reg |= AD193X_DAC_8_CHANNELS << AD193X_DAC_CHAN_SHFT;
- adc_reg |= AD193X_ADC_8_CHANNELS << AD193X_ADC_CHAN_SHFT;
+ channels = AD193X_8_CHANNELS;
break;
case 16:
- dac_reg |= AD193X_DAC_16_CHANNELS << AD193X_DAC_CHAN_SHFT;
- adc_reg |= AD193X_ADC_16_CHANNELS << AD193X_ADC_CHAN_SHFT;
+ channels = AD193X_16_CHANNELS;
break;
default:
return -EINVAL;
}
- snd_soc_write(codec, AD193X_DAC_CTRL1, dac_reg);
- snd_soc_write(codec, AD193X_ADC_CTRL2, adc_reg);
+ snd_soc_update_bits(codec, AD193X_DAC_CTRL1, AD193X_DAC_CHAN_MASK,
+ channels << AD193X_DAC_CHAN_SHFT);
+ snd_soc_update_bits(codec, AD193X_ADC_CTRL2, AD193X_ADC_CHAN_MASK,
+ channels << AD193X_ADC_CHAN_SHFT);
return 0;
}
@@ -160,23 +154,19 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- int adc_reg1, adc_reg2, dac_reg;
-
- adc_reg1 = snd_soc_read(codec, AD193X_ADC_CTRL1);
- adc_reg2 = snd_soc_read(codec, AD193X_ADC_CTRL2);
- dac_reg = snd_soc_read(codec, AD193X_DAC_CTRL1);
+ unsigned int adc_serfmt = 0;
+ unsigned int adc_fmt = 0;
+ unsigned int dac_fmt = 0;
/* At present, the driver only support AUX ADC mode(SND_SOC_DAIFMT_I2S
* with TDM) and ADC&DAC TDM mode(SND_SOC_DAIFMT_DSP_A)
*/
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
- adc_reg1 &= ~AD193X_ADC_SERFMT_MASK;
- adc_reg1 |= AD193X_ADC_SERFMT_TDM;
+ adc_serfmt |= AD193X_ADC_SERFMT_TDM;
break;
case SND_SOC_DAIFMT_DSP_A:
- adc_reg1 &= ~AD193X_ADC_SERFMT_MASK;
- adc_reg1 |= AD193X_ADC_SERFMT_AUX;
+ adc_serfmt |= AD193X_ADC_SERFMT_AUX;
break;
default:
return -EINVAL;
@@ -184,29 +174,20 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF: /* normal bit clock + frame */
- adc_reg2 &= ~AD193X_ADC_LEFT_HIGH;
- adc_reg2 &= ~AD193X_ADC_BCLK_INV;
- dac_reg &= ~AD193X_DAC_LEFT_HIGH;
- dac_reg &= ~AD193X_DAC_BCLK_INV;
break;
case SND_SOC_DAIFMT_NB_IF: /* normal bclk + invert frm */
- adc_reg2 |= AD193X_ADC_LEFT_HIGH;
- adc_reg2 &= ~AD193X_ADC_BCLK_INV;
- dac_reg |= AD193X_DAC_LEFT_HIGH;
- dac_reg &= ~AD193X_DAC_BCLK_INV;
+ adc_fmt |= AD193X_ADC_LEFT_HIGH;
+ dac_fmt |= AD193X_DAC_LEFT_HIGH;
break;
case SND_SOC_DAIFMT_IB_NF: /* invert bclk + normal frm */
- adc_reg2 &= ~AD193X_ADC_LEFT_HIGH;
- adc_reg2 |= AD193X_ADC_BCLK_INV;
- dac_reg &= ~AD193X_DAC_LEFT_HIGH;
- dac_reg |= AD193X_DAC_BCLK_INV;
+ adc_fmt |= AD193X_ADC_BCLK_INV;
+ dac_fmt |= AD193X_DAC_BCLK_INV;
break;
-
case SND_SOC_DAIFMT_IB_IF: /* invert bclk + frm */
- adc_reg2 |= AD193X_ADC_LEFT_HIGH;
- adc_reg2 |= AD193X_ADC_BCLK_INV;
- dac_reg |= AD193X_DAC_LEFT_HIGH;
- dac_reg |= AD193X_DAC_BCLK_INV;
+ adc_fmt |= AD193X_ADC_LEFT_HIGH;
+ adc_fmt |= AD193X_ADC_BCLK_INV;
+ dac_fmt |= AD193X_DAC_LEFT_HIGH;
+ dac_fmt |= AD193X_DAC_BCLK_INV;
break;
default:
return -EINVAL;
@@ -214,36 +195,31 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM: /* codec clk & frm master */
- adc_reg2 |= AD193X_ADC_LCR_MASTER;
- adc_reg2 |= AD193X_ADC_BCLK_MASTER;
- dac_reg |= AD193X_DAC_LCR_MASTER;
- dac_reg |= AD193X_DAC_BCLK_MASTER;
+ adc_fmt |= AD193X_ADC_LCR_MASTER;
+ adc_fmt |= AD193X_ADC_BCLK_MASTER;
+ dac_fmt |= AD193X_DAC_LCR_MASTER;
+ dac_fmt |= AD193X_DAC_BCLK_MASTER;
break;
case SND_SOC_DAIFMT_CBS_CFM: /* codec clk slave & frm master */
- adc_reg2 |= AD193X_ADC_LCR_MASTER;
- adc_reg2 &= ~AD193X_ADC_BCLK_MASTER;
- dac_reg |= AD193X_DAC_LCR_MASTER;
- dac_reg &= ~AD193X_DAC_BCLK_MASTER;
+ adc_fmt |= AD193X_ADC_LCR_MASTER;
+ dac_fmt |= AD193X_DAC_LCR_MASTER;
break;
case SND_SOC_DAIFMT_CBM_CFS: /* codec clk master & frame slave */
- adc_reg2 &= ~AD193X_ADC_LCR_MASTER;
- adc_reg2 |= AD193X_ADC_BCLK_MASTER;
- dac_reg &= ~AD193X_DAC_LCR_MASTER;
- dac_reg |= AD193X_DAC_BCLK_MASTER;
+ adc_fmt |= AD193X_ADC_BCLK_MASTER;
+ dac_fmt |= AD193X_DAC_BCLK_MASTER;
break;
case SND_SOC_DAIFMT_CBS_CFS: /* codec clk & frm slave */
- adc_reg2 &= ~AD193X_ADC_LCR_MASTER;
- adc_reg2 &= ~AD193X_ADC_BCLK_MASTER;
- dac_reg &= ~AD193X_DAC_LCR_MASTER;
- dac_reg &= ~AD193X_DAC_BCLK_MASTER;
break;
default:
return -EINVAL;
}
- snd_soc_write(codec, AD193X_ADC_CTRL1, adc_reg1);
- snd_soc_write(codec, AD193X_ADC_CTRL2, adc_reg2);
- snd_soc_write(codec, AD193X_DAC_CTRL1, dac_reg);
+ snd_soc_update_bits(codec, AD193X_ADC_CTRL1, AD193X_ADC_SERFMT_MASK,
+ adc_serfmt);
+ snd_soc_update_bits(codec, AD193X_ADC_CTRL2, AD193X_ADC_FMT_MASK,
+ adc_fmt);
+ snd_soc_update_bits(codec, AD193X_DAC_CTRL1, AD193X_DAC_FMT_MASK,
+ dac_fmt);
return 0;
}
diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h
index 1507eaa..4733880 100644
--- a/sound/soc/codecs/ad193x.h
+++ b/sound/soc/codecs/ad193x.h
@@ -23,16 +23,14 @@
#define AD193X_DAC_SERFMT_STEREO (0 << 6)
#define AD193X_DAC_SERFMT_TDM (1 << 6)
#define AD193X_DAC_CTRL1 0x03
-#define AD193X_DAC_2_CHANNELS 0
-#define AD193X_DAC_4_CHANNELS 1
-#define AD193X_DAC_8_CHANNELS 2
-#define AD193X_DAC_16_CHANNELS 3
#define AD193X_DAC_CHAN_SHFT 1
#define AD193X_DAC_CHAN_MASK (3 << AD193X_DAC_CHAN_SHFT)
#define AD193X_DAC_LCR_MASTER (1 << 4)
#define AD193X_DAC_BCLK_MASTER (1 << 5)
#define AD193X_DAC_LEFT_HIGH (1 << 3)
#define AD193X_DAC_BCLK_INV (1 << 7)
+#define AD193X_DAC_FMT_MASK (AD193X_DAC_LCR_MASTER | \
+ AD193X_DAC_BCLK_MASTER | AD193X_DAC_LEFT_HIGH | AD193X_DAC_BCLK_INV)
#define AD193X_DAC_CTRL2 0x04
#define AD193X_DAC_WORD_LEN_SHFT 3
#define AD193X_DAC_WORD_LEN_MASK 0x18
@@ -68,16 +66,19 @@
#define AD193X_ADC_SERFMT_AUX (2 << 5)
#define AD193X_ADC_WORD_LEN_MASK 0x3
#define AD193X_ADC_CTRL2 0x10
-#define AD193X_ADC_2_CHANNELS 0
-#define AD193X_ADC_4_CHANNELS 1
-#define AD193X_ADC_8_CHANNELS 2
-#define AD193X_ADC_16_CHANNELS 3
#define AD193X_ADC_CHAN_SHFT 4
#define AD193X_ADC_CHAN_MASK (3 << AD193X_ADC_CHAN_SHFT)
#define AD193X_ADC_LCR_MASTER (1 << 3)
#define AD193X_ADC_BCLK_MASTER (1 << 6)
#define AD193X_ADC_LEFT_HIGH (1 << 2)
#define AD193X_ADC_BCLK_INV (1 << 1)
+#define AD193X_ADC_FMT_MASK (AD193X_ADC_LCR_MASTER | \
+ AD193X_ADC_BCLK_MASTER | AD193X_ADC_LEFT_HIGH | AD193X_ADC_BCLK_INV)
+
+#define AD193X_2_CHANNELS 0
+#define AD193X_4_CHANNELS 1
+#define AD193X_8_CHANNELS 2
+#define AD193X_16_CHANNELS 3
#define AD193X_NUM_REGS 17
--
1.7.7.3
next prev parent reply other threads:[~2011-11-28 16:27 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-28 16:28 [PATCH 1/7] ASoC: ad193X: Use table based DAPM and controls setup Lars-Peter Clausen
2011-11-28 16:28 ` [PATCH 2/7] ASoC: ad193X: Provide dB ranges for the volume controls Lars-Peter Clausen
2011-11-28 16:28 ` [PATCH 3/7] ASoC: AD193X: Make enum items const char * const Lars-Peter Clausen
2011-11-28 18:53 ` Mark Brown
2011-11-28 19:01 ` Lars-Peter Clausen
2011-11-28 19:03 ` Mark Brown
2011-11-28 16:28 ` [PATCH 4/7] ASoC: ad193X: Remove non-functional DAPM route controls Lars-Peter Clausen
2011-11-28 16:28 ` [PATCH 5/7] ASOC: AD193X: Add sysclk DAPM supply Lars-Peter Clausen
2011-11-29 5:24 ` Mike Frysinger
2011-11-29 11:34 ` Mark Brown
2011-11-30 5:42 ` Mike Frysinger
2011-11-28 16:28 ` Lars-Peter Clausen [this message]
2011-11-28 16:28 ` [PATCH 7/7] ASoC: AD193X: Convert to direct regmap API usage Lars-Peter Clausen
2011-11-28 18:57 ` [PATCH 1/7] ASoC: ad193X: Use table based DAPM and controls setup Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1322497692-27868-6-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=device-drivers-devel@blackfin.uclinux.org \
--cc=drivers@analog.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®