From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753168Ab1K2HSY (ORCPT ); Tue, 29 Nov 2011 02:18:24 -0500 Received: from mga09.intel.com ([134.134.136.24]:47116 "EHLO mga09.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752546Ab1K2HSR (ORCPT ); Tue, 29 Nov 2011 02:18:17 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.67,351,1309762800"; d="scan'208";a="80995208" From: Feng Tang To: ben-linux@fluff.org, khali@linux-fr.org, tomoya-linux@dsn.lapis-semi.com, linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org Cc: joel.clark@intel.com, Feng Tang Subject: [PATCH 2/2] i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number Date: Tue, 29 Nov 2011 15:19:11 +0800 Message-Id: <1322551151-28580-2-git-send-email-feng.tang@intel.com> X-Mailer: git-send-email 1.7.1 In-Reply-To: <1322551151-28580-1-git-send-email-feng.tang@intel.com> References: <1322551151-28580-1-git-send-email-feng.tang@intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org For EG20T and ML7213 IOH, the i2c controller numbers are fixed, using fixed bus number will make it much easier for platform code to use i2c_register_board_info() to register i2c devices. Signed-off-by: Feng Tang --- drivers/i2c/busses/i2c-eg20t.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 18936ac..079435b 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -918,7 +918,9 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev, pch_adap->dev.parent = &pdev->dev; pch_i2c_init(&adap_info->pch_data[i]); - ret = i2c_add_adapter(pch_adap); + + pch_adap->nr = i; + ret = i2c_add_numbered_adapter(pch_adap); if (ret) { pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i); goto err_add_adapter; -- 1.7.1