[PATCH v2-rebased] mfd: TPS65910: Make usable even if interrupt unused

[Afzal Mohammed <afzal@ti.com>]

TPS65910 can be used even if interrupt is unused.
Hence let probe succeed in case interrupt can't be
configured and let Kernel only to complain about it

Signed-off-by: Afzal Mohammed <afzal@ti.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
Hi Samuel,

I sent this yesterday, but did not reach LKML,
so assumed you also may not have recieved it;
resending.

Regards
Afzal

 drivers/mfd/tps65910.c |    5 +----
 1 files changed, 1 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 6f5b8cf..2fa0178 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -172,15 +172,12 @@ static int tps65910_i2c_probe(struct i2c_client *i2c,
 
 	tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base);
 
-	ret = tps65910_irq_init(tps65910, init_data->irq, init_data);
-	if (ret < 0)
-		goto err;
+	tps65910_irq_init(tps65910, init_data->irq, init_data);
 
 	kfree(init_data);
 	return ret;
 
 err:
-	mfd_remove_devices(tps65910->dev);
 	kfree(tps65910);
 	kfree(init_data);
 	return ret;
-- 
1.7.1