From: Kelvin Cheung <keguang.zhang@gmail.com>
To: ralf@linux-mips.org, linux-mips@linux-mips.org,
linux-kernel@vger.kernel.org
Cc: zhzhl555@gmail.com, peppe.cavallaro@st.com, wuzhangjin@gmail.com,
r0bertz@gentoo.org, Kelvin Cheung <keguang.zhang@gmail.com>
Subject: [PATCH V5 0/4] MIPS: Add support for Loongson1B
Date: Fri, 16 Dec 2011 19:39:00 +0800 [thread overview]
Message-ID: <1324035544-2373-1-git-send-email-keguang.zhang@gmail.com> (raw)
These patches add support for Loongson1B.
Changelog:
V5: Add IS_ENABLED() macro for platform devices.
V4: Split the RTC patch, and merge the arch/mips parts into patch 2/4.
Use 'KSEG1ADDR' instead of 'ioremap()' in registers definitions.
V3: Add RTC device for Loongson1B.
V2: Add Ethernet device for Loongson1B.
V1: Add basic support for Loongson1B.
----------------
Kelvin Cheung (4):
MIPS: Add CPU support for Loongson1B
MIPS: Add board support for Loongson1B
MIPS: Add Makefile and Kconfig for Loongson1B
MIPS: Add defconfig for Loongson1B
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 31 ++++
arch/mips/configs/ls1b_defconfig | 90 ++++++++++++
arch/mips/include/asm/cpu.h | 3 +-
arch/mips/include/asm/mach-loongson1/irq.h | 68 +++++++++
arch/mips/include/asm/mach-loongson1/loongson1.h | 44 ++++++
arch/mips/include/asm/mach-loongson1/platform.h | 22 +++
arch/mips/include/asm/mach-loongson1/prom.h | 24 +++
arch/mips/include/asm/mach-loongson1/regs-clk.h | 33 +++++
arch/mips/include/asm/mach-loongson1/regs-wdt.h | 22 +++
arch/mips/include/asm/mach-loongson1/war.h | 25 ++++
arch/mips/include/asm/module.h | 2 +
arch/mips/kernel/cpu-probe.c | 15 ++
arch/mips/kernel/perf_event_mipsxx.c | 6 +
arch/mips/kernel/traps.c | 1 +
arch/mips/loongson1/Kconfig | 21 +++
arch/mips/loongson1/Makefile | 11 ++
arch/mips/loongson1/Platform | 7 +
arch/mips/loongson1/common/Makefile | 5 +
arch/mips/loongson1/common/clock.c | 165 ++++++++++++++++++++++
arch/mips/loongson1/common/irq.c | 146 +++++++++++++++++++
arch/mips/loongson1/common/platform.c | 102 +++++++++++++
arch/mips/loongson1/common/prom.c | 87 ++++++++++++
arch/mips/loongson1/common/reset.c | 45 ++++++
arch/mips/loongson1/common/setup.c | 29 ++++
arch/mips/loongson1/ls1b/Makefile | 5 +
arch/mips/loongson1/ls1b/board.c | 36 +++++
arch/mips/oprofile/common.c | 1 +
arch/mips/oprofile/op_model_mipsxx.c | 4 +
29 files changed, 1050 insertions(+), 1 deletions(-)
create mode 100644 arch/mips/configs/ls1b_defconfig
create mode 100644 arch/mips/include/asm/mach-loongson1/irq.h
create mode 100644 arch/mips/include/asm/mach-loongson1/loongson1.h
create mode 100644 arch/mips/include/asm/mach-loongson1/platform.h
create mode 100644 arch/mips/include/asm/mach-loongson1/prom.h
create mode 100644 arch/mips/include/asm/mach-loongson1/regs-clk.h
create mode 100644 arch/mips/include/asm/mach-loongson1/regs-wdt.h
create mode 100644 arch/mips/include/asm/mach-loongson1/war.h
create mode 100644 arch/mips/loongson1/Kconfig
create mode 100644 arch/mips/loongson1/Makefile
create mode 100644 arch/mips/loongson1/Platform
create mode 100644 arch/mips/loongson1/common/Makefile
create mode 100644 arch/mips/loongson1/common/clock.c
create mode 100644 arch/mips/loongson1/common/irq.c
create mode 100644 arch/mips/loongson1/common/platform.c
create mode 100644 arch/mips/loongson1/common/prom.c
create mode 100644 arch/mips/loongson1/common/reset.c
create mode 100644 arch/mips/loongson1/common/setup.c
create mode 100644 arch/mips/loongson1/ls1b/Makefile
create mode 100644 arch/mips/loongson1/ls1b/board.c
next reply other threads:[~2011-12-16 11:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-16 11:39 Kelvin Cheung [this message]
2011-12-16 11:39 ` [PATCH V5 1/4] MIPS: Add CPU " Kelvin Cheung
2011-12-16 11:39 ` [PATCH V5 2/4] MIPS: Add board " Kelvin Cheung
2011-12-16 11:39 ` [PATCH V5 3/4] MIPS: Add Makefile and Kconfig " Kelvin Cheung
2011-12-16 11:39 ` [PATCH V5 4/4] MIPS: Add defconfig " Kelvin Cheung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324035544-2373-1-git-send-email-keguang.zhang@gmail.com \
--to=keguang.zhang@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=peppe.cavallaro@st.com \
--cc=r0bertz@gentoo.org \
--cc=ralf@linux-mips.org \
--cc=wuzhangjin@gmail.com \
--cc=zhzhl555@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®