From: Austin Boyle <Austin.Boyle@aviatnet.com>
To: David Anders <danders.dev@gmail.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>,
<rtc-linux@googlegroups.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Joakim Tjernlund <Joakim.Tjernlund@transmode.se>,
<linux-kernel@vger.kernel.org>, <x0132446@ti.com>
Subject: Re: [PATCH v3] rtc: ds1307: generalise ram size and offset
Date: Mon, 19 Dec 2011 14:24:18 +1300 [thread overview]
Message-ID: <1324257858.3125.57.camel@pc786-ubu.gnet.global.vpn> (raw)
In-Reply-To: <CAAOQ2gvtwfwwh+YVjJNEX8GFVK3QatKB5miStiDTg4p_8myuxw@mail.gmail.com>
Hi David,
Did you ever get time to test this patch?
Thanks,
Austin.
On Thu, 2011-11-03 at 16:25 -0500, David Anders wrote:
> Austin,
>
> On Thu, Nov 3, 2011 at 4:07 PM, Austin Boyle <Austin.Boyle@aviatnet.com> wrote:
> > From: Austin Boyle <Austin.Boyle@aviatnet.com>
> >
> > This patch generalises NVRAM to support RAM with other size and offset, such
> > as the 64 bytes of SRAM on the mcp7941x. Register offsets are added to chip
> > description instead of being hard-coded into probe function.
> >
> > Cc: Wolfram Sang <w.sang@pengutronix.de>
> > Cc: David Anderson <danders.dev@gmail.com>
>
> please correct my name: David Anders
>
> > Cc: Alessandro Zummo <a.zummo@towertech.it>
> > Cc: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
> > Signed-off-by: Austin Boyle <Austin.Boyle@aviatnet.com>
>
> i'll apply and test for MCP7941x parts
>
> > ---
> > this patch is based on Wolfram Sang's tree:
> > git://git.pengutronix.de/git/wsa/linux-2.6.git ds1307
> >
> > patch depends on:
> > rtc: ds1307: comment and format cleanup 21af5f7bd6
> > rtc: ds1307: simplify irq setup code 8c63e03627
> > rtc: ds1307: refactor chip_desc table e246db081d
> > rtc: add initial support for mcp7941x parts e69bba2d3a
> >
> > --- a/drivers/rtc/rtc-ds1307.c 2011-10-10 11:22:22.674690998 +1300
> > +++ b/drivers/rtc/rtc-ds1307.c 2011-11-04 10:02:27.859155009 +1300
> > @@ -104,6 +104,8 @@ enum ds_type {
> >
> > struct ds1307 {
> > u8 offset; /* register's offset */
> > + u16 nvram_offset;
> > + u16 nvram_size;
> > u8 regs[11];
> > enum ds_type type;
> > unsigned long flags;
> > @@ -119,26 +121,37 @@ struct ds1307 {
> > };
> >
> > struct chip_desc {
> > - unsigned nvram56:1;
> > unsigned alarm:1;
> > + u8 offset;
> > + u16 nvram_offset;
> > + u16 nvram_size;
> > };
> >
> > static const struct chip_desc chips[last_ds_type] = {
> > [ds_1307] = {
> > - .nvram56 = 1,
> > + .nvram_offset = 8,
> > + .nvram_size = 56, /* 56 bytes NVRAM */
> > },
> > [ds_1337] = {
> > .alarm = 1,
> > },
> > [ds_1338] = {
> > - .nvram56 = 1,
> > + .nvram_offset = 8,
> > + .nvram_size = 56, /* 56 bytes NVRAM */
> > },
> > [ds_1339] = {
> > .alarm = 1,
> > },
> > + [ds_1388] = {
> > + .offset = 1, /* seconds starts at 1 */
> > + },
> > [ds_3231] = {
> > .alarm = 1,
> > },
> > + [mcp7941x] = {
> > + .nvram_offset = 0x20,
> > + .nvram_size = 64, /* 64 bytes SRAM */
> > + },
> > };
> >
> > static const struct i2c_device_id ds1307_id[] = {
> > @@ -543,8 +556,6 @@ static const struct rtc_class_ops ds13xx
> >
> > /*----------------------------------------------------------------------*/
> >
> > -#define NVRAM_SIZE 56
> > -
> > static ssize_t
> > ds1307_nvram_read(struct file *filp, struct kobject *kobj,
> > struct bin_attribute *attr,
> > @@ -557,14 +568,15 @@ ds1307_nvram_read(struct file *filp, str
> > client = kobj_to_i2c_client(kobj);
> > ds1307 = i2c_get_clientdata(client);
> >
> > - if (unlikely(off >= NVRAM_SIZE))
> > + if (unlikely(off >= ds1307->nvram_size))
> > return 0;
> > - if ((off + count) > NVRAM_SIZE)
> > - count = NVRAM_SIZE - off;
> > + if ((off + count) > ds1307->nvram_size)
> > + count = ds1307->nvram_size - off;
> > if (unlikely(!count))
> > return count;
> >
> > - result = ds1307->read_block_data(client, 8 + off, count, buf);
> > + result = ds1307->read_block_data(client, ds1307->nvram_offset + off,
> > + count, buf);
> > if (result < 0)
> > dev_err(&client->dev, "%s error %d\n", "nvram read", result);
> > return result;
> > @@ -582,14 +594,15 @@ ds1307_nvram_write(struct file *filp, st
> > client = kobj_to_i2c_client(kobj);
> > ds1307 = i2c_get_clientdata(client);
> >
> > - if (unlikely(off >= NVRAM_SIZE))
> > + if (unlikely(off >= ds1307->nvram_size))
> > return -EFBIG;
> > - if ((off + count) > NVRAM_SIZE)
> > - count = NVRAM_SIZE - off;
> > + if ((off + count) > ds1307->nvram_size)
> > + count = ds1307->nvram_size - off;
> > if (unlikely(!count))
> > return count;
> >
> > - result = ds1307->write_block_data(client, 8 + off, count, buf);
> > + result = ds1307->write_block_data(client, ds1307->nvram_offset + off,
> > + count, buf);
> > if (result < 0) {
> > dev_err(&client->dev, "%s error %d\n", "nvram write", result);
> > return result;
> > @@ -605,7 +618,6 @@ static struct bin_attribute nvram = {
> >
> > .read = ds1307_nvram_read,
> > .write = ds1307_nvram_write,
> > - .size = NVRAM_SIZE,
> > };
> >
> > /*----------------------------------------------------------------------*/
> > @@ -638,7 +650,19 @@ static int __devinit ds1307_probe(struct
> >
> > ds1307->client = client;
> > ds1307->type = id->driver_data;
> > - ds1307->offset = 0;
> > +
> > + if (chip && chip->offset)
> > + ds1307->offset = chip->offset;
> > + else
> > + ds1307->offset = 0;
> > + if (chip && chip->nvram_size)
> > + ds1307->nvram_size = chip->nvram_size;
> > + else
> > + ds1307->nvram_size = 0;
> > + if (chip && chip->nvram_offset)
> > + ds1307->nvram_offset = chip->nvram_offset;
> > + else
> > + ds1307->nvram_offset = 0;
> >
> > buf = ds1307->regs;
> > if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
> > @@ -756,9 +780,6 @@ static int __devinit ds1307_probe(struct
> > hour);
> > }
> > break;
> > - case ds_1388:
> > - ds1307->offset = 1; /* Seconds starts at 1 */
> > - break;
> > default:
> > break;
> > }
> > @@ -893,11 +914,12 @@ read_rtc:
> > dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
> > }
> >
> > - if (chip && chip->nvram56) {
> > + if (chip && chip->nvram_size) {
> > + nvram.size = ds1307->nvram_size;
> > err = sysfs_create_bin_file(&client->dev.kobj, &nvram);
> > if (err == 0) {
> > set_bit(HAS_NVRAM, &ds1307->flags);
> > - dev_info(&client->dev, "56 bytes nvram\n");
> > + dev_info(&client->dev, "%zd bytes nvram\n", nvram.size);
> > }
> > }
> >
> >
> >
> >
>
> Dave
next prev parent reply other threads:[~2011-12-19 1:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-03 21:07 Austin Boyle
2011-11-03 21:25 ` David Anders
2011-12-19 1:24 ` Austin Boyle [this message]
2012-01-09 21:21 Austin Boyle
2012-01-09 22:17 ` Wolfram Sang
2012-01-10 0:33 ` Austin Boyle
2012-01-11 11:06 ` Wolfram Sang
2012-01-11 22:21 ` Austin Boyle
2012-01-18 21:41 ` Wolfram Sang
2012-01-19 19:45 ` Wolfram Sang
2012-02-02 0:37 ` Austin Boyle
2012-02-02 22:28 ` Austin Boyle
2012-02-07 14:56 ` Wolfram Sang
2012-02-07 21:45 ` Austin Boyle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324257858.3125.57.camel@pc786-ubu.gnet.global.vpn \
--to=austin.boyle@aviatnet.com \
--cc=Joakim.Tjernlund@transmode.se \
--cc=a.zummo@towertech.it \
--cc=danders.dev@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=w.sang@pengutronix.de \
--cc=x0132446@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®