From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Linus Walleij <linus.walleij@stericsson.com>,
Grant Likely <grant@secretlab.ca>
Cc: linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 3/4] gpio: Convert GPIO drivers to module_platform_driver
Date: Wed, 21 Dec 2011 00:20:16 +0000 [thread overview]
Message-ID: <1324426817-2196-3-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1324426817-2196-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Where appropriate factor out some boilerplate code for platform device
registration into module_platform_driver. Drivers that don't use the
standard module_init initcall haven't been converted.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/gpio/gpio-adp5520.c | 12 +-----------
drivers/gpio/gpio-cs5535.c | 13 +------------
drivers/gpio/gpio-da9052.c | 12 +-----------
drivers/gpio/gpio-generic.c | 12 +-----------
drivers/gpio/gpio-janz-ttl.c | 13 +------------
drivers/gpio/gpio-rdc321x.c | 13 +------------
drivers/gpio/gpio-sch.c | 13 +------------
drivers/gpio/gpio-timberdale.c | 13 +------------
drivers/gpio/gpio-ucb1400.c | 13 +------------
drivers/gpio/gpio-vr41xx.c | 13 +------------
drivers/gpio/gpio-vx855.c | 12 +-----------
11 files changed, 11 insertions(+), 128 deletions(-)
diff --git a/drivers/gpio/gpio-adp5520.c b/drivers/gpio/gpio-adp5520.c
index 9f27815..2f263cc 100644
--- a/drivers/gpio/gpio-adp5520.c
+++ b/drivers/gpio/gpio-adp5520.c
@@ -193,17 +193,7 @@ static struct platform_driver adp5520_gpio_driver = {
.remove = __devexit_p(adp5520_gpio_remove),
};
-static int __init adp5520_gpio_init(void)
-{
- return platform_driver_register(&adp5520_gpio_driver);
-}
-module_init(adp5520_gpio_init);
-
-static void __exit adp5520_gpio_exit(void)
-{
- platform_driver_unregister(&adp5520_gpio_driver);
-}
-module_exit(adp5520_gpio_exit);
+module_platform_driver(adp5520_gpio_driver);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("GPIO ADP5520 Driver");
diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c
index 693a81b..19eda1b 100644
--- a/drivers/gpio/gpio-cs5535.c
+++ b/drivers/gpio/gpio-cs5535.c
@@ -381,18 +381,7 @@ static struct platform_driver cs5535_gpio_driver = {
.remove = __devexit_p(cs5535_gpio_remove),
};
-static int __init cs5535_gpio_init(void)
-{
- return platform_driver_register(&cs5535_gpio_driver);
-}
-
-static void __exit cs5535_gpio_exit(void)
-{
- platform_driver_unregister(&cs5535_gpio_driver);
-}
-
-module_init(cs5535_gpio_init);
-module_exit(cs5535_gpio_exit);
+module_platform_driver(cs5535_gpio_driver);
MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c
index f8ce29e..56dd047 100644
--- a/drivers/gpio/gpio-da9052.c
+++ b/drivers/gpio/gpio-da9052.c
@@ -254,17 +254,7 @@ static struct platform_driver da9052_gpio_driver = {
},
};
-static int __init da9052_gpio_init(void)
-{
- return platform_driver_register(&da9052_gpio_driver);
-}
-module_init(da9052_gpio_init);
-
-static void __exit da9052_gpio_exit(void)
-{
- return platform_driver_unregister(&da9052_gpio_driver);
-}
-module_exit(da9052_gpio_exit);
+module_platform_driver(da9052_gpio_driver);
MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
MODULE_DESCRIPTION("DA9052 GPIO Device Driver");
diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c
index 4e24436..e38dd0c 100644
--- a/drivers/gpio/gpio-generic.c
+++ b/drivers/gpio/gpio-generic.c
@@ -524,17 +524,7 @@ static struct platform_driver bgpio_driver = {
.remove = __devexit_p(bgpio_pdev_remove),
};
-static int __init bgpio_platform_init(void)
-{
- return platform_driver_register(&bgpio_driver);
-}
-module_init(bgpio_platform_init);
-
-static void __exit bgpio_platform_exit(void)
-{
- platform_driver_unregister(&bgpio_driver);
-}
-module_exit(bgpio_platform_exit);
+module_platform_driver(bgpio_driver);
#endif /* CONFIG_GPIO_GENERIC_PLATFORM */
diff --git a/drivers/gpio/gpio-janz-ttl.c b/drivers/gpio/gpio-janz-ttl.c
index 6f7fda0..f2f000d 100644
--- a/drivers/gpio/gpio-janz-ttl.c
+++ b/drivers/gpio/gpio-janz-ttl.c
@@ -237,20 +237,9 @@ static struct platform_driver ttl_driver = {
.remove = __devexit_p(ttl_remove),
};
-static int __init ttl_init(void)
-{
- return platform_driver_register(&ttl_driver);
-}
-
-static void __exit ttl_exit(void)
-{
- platform_driver_unregister(&ttl_driver);
-}
+module_platform_driver(ttl_driver);
MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:janz-ttl");
-
-module_init(ttl_init);
-module_exit(ttl_exit);
diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c
index 2762698..e97016a 100644
--- a/drivers/gpio/gpio-rdc321x.c
+++ b/drivers/gpio/gpio-rdc321x.c
@@ -227,18 +227,7 @@ static struct platform_driver rdc321x_gpio_driver = {
.remove = __devexit_p(rdc321x_gpio_remove),
};
-static int __init rdc321x_gpio_init(void)
-{
- return platform_driver_register(&rdc321x_gpio_driver);
-}
-
-static void __exit rdc321x_gpio_exit(void)
-{
- platform_driver_unregister(&rdc321x_gpio_driver);
-}
-
-module_init(rdc321x_gpio_init);
-module_exit(rdc321x_gpio_exit);
+module_platform_driver(rdc321x_gpio_driver);
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
MODULE_DESCRIPTION("RDC321x GPIO driver");
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 1635158..8cadf4d 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -297,18 +297,7 @@ static struct platform_driver sch_gpio_driver = {
.remove = __devexit_p(sch_gpio_remove),
};
-static int __init sch_gpio_init(void)
-{
- return platform_driver_register(&sch_gpio_driver);
-}
-
-static void __exit sch_gpio_exit(void)
-{
- platform_driver_unregister(&sch_gpio_driver);
-}
-
-module_init(sch_gpio_init);
-module_exit(sch_gpio_exit);
+module_platform_driver(sch_gpio_driver);
MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c
index c593bd4..031c6ad 100644
--- a/drivers/gpio/gpio-timberdale.c
+++ b/drivers/gpio/gpio-timberdale.c
@@ -359,18 +359,7 @@ static struct platform_driver timbgpio_platform_driver = {
/*--------------------------------------------------------------------------*/
-static int __init timbgpio_init(void)
-{
- return platform_driver_register(&timbgpio_platform_driver);
-}
-
-static void __exit timbgpio_exit(void)
-{
- platform_driver_unregister(&timbgpio_platform_driver);
-}
-
-module_init(timbgpio_init);
-module_exit(timbgpio_exit);
+module_platform_driver(timbgpio_platform_driver);
MODULE_DESCRIPTION("Timberdale GPIO driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c
index 50e6bd1..26405ef 100644
--- a/drivers/gpio/gpio-ucb1400.c
+++ b/drivers/gpio/gpio-ucb1400.c
@@ -103,23 +103,12 @@ static struct platform_driver ucb1400_gpio_driver = {
},
};
-static int __init ucb1400_gpio_init(void)
-{
- return platform_driver_register(&ucb1400_gpio_driver);
-}
-
-static void __exit ucb1400_gpio_exit(void)
-{
- platform_driver_unregister(&ucb1400_gpio_driver);
-}
-
void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
{
ucbdata = data;
}
-module_init(ucb1400_gpio_init);
-module_exit(ucb1400_gpio_exit);
+module_platform_driver(ucb1400_gpio_driver);
MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-vr41xx.c b/drivers/gpio/gpio-vr41xx.c
index 98723cb..82d5c20 100644
--- a/drivers/gpio/gpio-vr41xx.c
+++ b/drivers/gpio/gpio-vr41xx.c
@@ -571,15 +571,4 @@ static struct platform_driver giu_device_driver = {
},
};
-static int __init vr41xx_giu_init(void)
-{
- return platform_driver_register(&giu_device_driver);
-}
-
-static void __exit vr41xx_giu_exit(void)
-{
- platform_driver_unregister(&giu_device_driver);
-}
-
-module_init(vr41xx_giu_init);
-module_exit(vr41xx_giu_exit);
+module_platform_driver(giu_device_driver);
diff --git a/drivers/gpio/gpio-vx855.c b/drivers/gpio/gpio-vx855.c
index ef5aabd..76ebfe5 100644
--- a/drivers/gpio/gpio-vx855.c
+++ b/drivers/gpio/gpio-vx855.c
@@ -315,17 +315,7 @@ static struct platform_driver vx855gpio_driver = {
.remove = __devexit_p(vx855gpio_remove),
};
-static int vx855gpio_init(void)
-{
- return platform_driver_register(&vx855gpio_driver);
-}
-module_init(vx855gpio_init);
-
-static void vx855gpio_exit(void)
-{
- platform_driver_unregister(&vx855gpio_driver);
-}
-module_exit(vx855gpio_exit);
+module_platform_driver(vx855gpio_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Harald Welte <HaraldWelte@viatech.com>");
--
1.7.7.3
next prev parent reply other threads:[~2011-12-21 0:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-21 0:20 [PATCH 1/4] gpio: Explicitly index samsung_gpio_cfgs Mark Brown
2011-12-21 0:20 ` [PATCH 2/4] gpio: Fix typo in comment in Samsung driver Mark Brown
2011-12-21 0:20 ` Mark Brown [this message]
2011-12-21 0:20 ` [PATCH 4/4] gpio: Add decode of WM8994 GPIO configuration Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2011-12-07 16:22 [PATCH 0/4] Random GPIO updates Mark Brown
2011-12-07 16:23 ` [PATCH 1/4] gpio: Explicitly index samsung_gpio_cfgs Mark Brown
2011-12-07 16:24 ` [PATCH 3/4] gpio: Convert GPIO drivers to module_platform_driver Mark Brown
2012-01-02 7:27 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324426817-2196-3-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=grant@secretlab.ca \
--cc=linus.walleij@stericsson.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome