mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Eric Dumazet <eric.dumazet@gmail.com>
To: Chris Boot <bootc@bootc.net>, David Miller <davem@davemloft.net>
Cc: lkml <linux-kernel@vger.kernel.org>,
	netdev <netdev@vger.kernel.org>,
	Steffen Klassert <steffen.klassert@secunet.com>
Subject: Re: BUG: unable to handle kernel NULL pointer dereference in ipv6_select_ident
Date: Thu, 22 Dec 2011 15:15:53 +0100	[thread overview]
Message-ID: <1324563353.2153.27.camel@edumazet-HP-Compaq-6005-Pro-SFF-PC> (raw)
In-Reply-To: <4EF300B2.3050903@bootc.net>

Le jeudi 22 décembre 2011 à 10:04 +0000, Chris Boot a écrit :

> Eric,
> 
> So far so good. I've had this running for several hours this morning 
> with more of the prodding that would normally have crashed it, both IPv4 
> and IPv6, and it's holding up well.
> 

Thanks for testing.

Here is the official patch then (the .mtu() bit belongs to a separate
patch)

[PATCH] net: introduce DST_NOPEER dst flag

Chris Boot reported crashes occurring in ipv6_select_ident().

[  461.457562] RIP: 0010:[<ffffffff812dde61>]  [<ffffffff812dde61>] 
ipv6_select_ident+0x31/0xa7

[  461.578229] Call Trace:
[  461.580742] <IRQ>
[  461.582870]  [<ffffffff812efa7f>] ? udp6_ufo_fragment+0x124/0x1a2
[  461.589054]  [<ffffffff812dbfe0>] ? ipv6_gso_segment+0xc0/0x155
[  461.595140]  [<ffffffff812700c6>] ? skb_gso_segment+0x208/0x28b
[  461.601198]  [<ffffffffa03f236b>] ? ipv6_confirm+0x146/0x15e 
[nf_conntrack_ipv6]
[  461.608786]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.614227]  [<ffffffff81271d64>] ? dev_hard_start_xmit+0x357/0x543
[  461.620659]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.626440]  [<ffffffffa0379745>] ? br_parse_ip_options+0x19a/0x19a 
[bridge]
[  461.633581]  [<ffffffff812722ff>] ? dev_queue_xmit+0x3af/0x459
[  461.639577]  [<ffffffffa03747d2>] ? br_dev_queue_push_xmit+0x72/0x76 
[bridge]
[  461.646887]  [<ffffffffa03791e3>] ? br_nf_post_routing+0x17d/0x18f 
[bridge]
[  461.653997]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.659473]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.665485]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.671234]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.677299]  [<ffffffffa0379215>] ? 
nf_bridge_update_protocol+0x20/0x20 [bridge]
[  461.684891]  [<ffffffffa03bb0e5>] ? nf_ct_zone+0xa/0x17 [nf_conntrack]
[  461.691520]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.697572]  [<ffffffffa0374812>] ? NF_HOOK.constprop.8+0x3c/0x56 
[bridge]
[  461.704616]  [<ffffffffa0379031>] ? 
nf_bridge_push_encap_header+0x1c/0x26 [bridge]
[  461.712329]  [<ffffffffa037929f>] ? br_nf_forward_finish+0x8a/0x95 
[bridge]
[  461.719490]  [<ffffffffa037900a>] ? 
nf_bridge_pull_encap_header+0x1c/0x27 [bridge]
[  461.727223]  [<ffffffffa0379974>] ? br_nf_forward_ip+0x1c0/0x1d4 [bridge]
[  461.734292]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.739758]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.746203]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.751950]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.758378]  [<ffffffffa037533a>] ? NF_HOOK.constprop.4+0x56/0x56 
[bridge]

This is caused by bridge netfilter special dst_entry (fake_rtable), a
special shared entry, where attaching an inetpeer makes no sense.

Problem is present since commit 87c48fa3b46 (ipv6: make fragment
identifications less predictable)

Introduce DST_NOPEER dst flag and make sure ipv6_select_ident() and
__ip_select_ident() fallback to the 'no peer attached' handling.

Reported-by: Chris Boot <bootc@bootc.net>
Tested-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
---
 include/net/dst.h         |    1 +
 net/bridge/br_netfilter.c |    2 +-
 net/ipv4/route.c          |    4 ++--
 net/ipv6/ip6_output.c     |    2 +-
 4 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/include/net/dst.h b/include/net/dst.h
index 6faec1a..75766b4 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -53,6 +53,7 @@ struct dst_entry {
 #define DST_NOHASH		0x0008
 #define DST_NOCACHE		0x0010
 #define DST_NOCOUNT		0x0020
+#define DST_NOPEER		0x0040
 
 	short			error;
 	short			obsolete;
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index d6ec372..5693e5f 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -141,7 +141,7 @@ void br_netfilter_rtable_init(struct net_bridge *br)
 	rt->dst.dev = br->dev;
 	rt->dst.path = &rt->dst;
 	dst_init_metrics(&rt->dst, br_dst_default_metrics, true);
-	rt->dst.flags	= DST_NOXFRM;
+	rt->dst.flags	= DST_NOXFRM | DST_NOPEER;
 	rt->dst.ops = &fake_dst_ops;
 }
 
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 252c512..a5004f1 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1366,7 +1366,7 @@ void __ip_select_ident(struct iphdr *iph, struct dst_entry *dst, int more)
 {
 	struct rtable *rt = (struct rtable *) dst;
 
-	if (rt) {
+	if (rt && !(rt->dst.flags & DST_NOPEER)) {
 		if (rt->peer == NULL)
 			rt_bind_peer(rt, rt->rt_dst, 1);
 
@@ -1377,7 +1377,7 @@ void __ip_select_ident(struct iphdr *iph, struct dst_entry *dst, int more)
 			iph->id = htons(inet_getid(rt->peer, more));
 			return;
 		}
-	} else
+	} else if (!rt)
 		printk(KERN_DEBUG "rt_bind_peer(0) @%p\n",
 		       __builtin_return_address(0));
 
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 84d0bd5..ec56271 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -603,7 +603,7 @@ void ipv6_select_ident(struct frag_hdr *fhdr, struct rt6_info *rt)
 	static atomic_t ipv6_fragmentation_id;
 	int old, new;
 
-	if (rt) {
+	if (rt && !(rt->dst.flags & DST_NOPEER)) {
 		struct inet_peer *peer;
 
 		if (!rt->rt6i_peer)



  reply	other threads:[~2011-12-22 14:16 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-21 15:52 Chris Boot
2011-12-21 16:29 ` Eric Dumazet
2011-12-21 17:03   ` Chris Boot
2011-12-21 17:36     ` Eric Dumazet
2011-12-21 18:00       ` Eric Dumazet
2011-12-21 20:05         ` Chris Boot
2011-12-21 20:28           ` Eric Dumazet
2011-12-21 20:52             ` Eric Dumazet
2011-12-21 21:58               ` Chris Boot
2011-12-21 23:12                 ` Chris Boot
2011-12-22  4:37                   ` Eric Dumazet
2011-12-22  6:00                     ` [PATCH] bridge: provide a mtu() method for fake_dst_ops Eric Dumazet
2011-12-22  7:05                       ` Steffen Klassert
2011-12-22  6:38                     ` BUG: unable to handle kernel NULL pointer dereference in ipv6_select_ident Steffen Klassert
2011-12-22  7:51                       ` Eric Dumazet
2011-12-22  7:58                         ` Steffen Klassert
2011-12-22  8:05                           ` Eric Dumazet
2011-12-22 10:01                             ` Steffen Klassert
2011-12-22 10:04                     ` Chris Boot
2011-12-22 14:15                       ` Eric Dumazet [this message]
2011-12-22 15:54                         ` Chris Boot
2011-12-22 17:41                           ` Eric Dumazet
2011-12-22 18:29                             ` David Miller
2011-12-23  3:38                         ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1324563353.2153.27.camel@edumazet-HP-Compaq-6005-Pro-SFF-PC \
    --to=eric.dumazet@gmail.com \
    --cc=bootc@bootc.net \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=steffen.klassert@secunet.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®