From: Olof Johansson <olof@lixom.net>
To: x86@kernel.org, hpa@zytor.com, mingo@elte.hu, tglx@linutronix.de
Cc: linux-kernel@vger.kernel.org, matt.fleming@intel.com,
mjg@redhat.com, Olof Johansson <olof@lixom.net>,
Joe Perches <joe@perches.com>
Subject: [PATCH 2/5] x86: efi: convert printk to pr_*()
Date: Tue, 7 Feb 2012 16:25:29 -0800 [thread overview]
Message-ID: <1328660732-27263-3-git-send-email-olof@lixom.net> (raw)
In-Reply-To: <1328660732-27263-1-git-send-email-olof@lixom.net>
Alright, I guess I'll go through and convert them, even though
there's no net gain to speak of.
v4:
* Switched to pr_fmt and removed some redundant use of "EFI" in
messages.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Joe Perches <joe@perches.com>
---
arch/x86/platform/efi/efi.c | 58 +++++++++++++++++++++---------------------
1 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index fec2b2e..777de17 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -26,6 +26,8 @@
* Skip non-WB memory and ignore empty memory ranges.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/efi.h>
@@ -47,7 +49,6 @@
#include <asm/x86_init.h>
#define EFI_DEBUG 1
-#define PFX "EFI: "
int efi_enabled;
EXPORT_SYMBOL(efi_enabled);
@@ -254,7 +255,7 @@ int efi_set_rtc_mmss(unsigned long nowtime)
status = efi.get_time(&eft, &cap);
if (status != EFI_SUCCESS) {
- printk(KERN_ERR "Oops: efitime: can't read time!\n");
+ pr_err("Oops: efitime: can't read time!\n");
return -1;
}
@@ -268,7 +269,7 @@ int efi_set_rtc_mmss(unsigned long nowtime)
status = efi.set_time(&eft);
if (status != EFI_SUCCESS) {
- printk(KERN_ERR "Oops: efitime: can't write time!\n");
+ pr_err("Oops: efitime: can't write time!\n");
return -1;
}
return 0;
@@ -282,7 +283,7 @@ unsigned long efi_get_time(void)
status = efi.get_time(&eft, &cap);
if (status != EFI_SUCCESS)
- printk(KERN_ERR "Oops: efitime: can't read time!\n");
+ pr_err("Oops: efitime: can't read time!\n");
return mktime(eft.year, eft.month, eft.day, eft.hour,
eft.minute, eft.second);
@@ -374,7 +375,7 @@ static void __init print_efi_memmap(void)
p < memmap.map_end;
p += memmap.desc_size, i++) {
md = p;
- printk(KERN_INFO PFX "mem%02u: type=%u, attr=0x%llx, "
+ pr_info("mem%02u: type=%u, attr=0x%llx, "
"range=[0x%016llx-0x%016llx) (%lluMB)\n",
i, md->type, md->attribute, md->phys_addr,
md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT),
@@ -407,7 +408,7 @@ void __init efi_reserve_boot_services(void)
memblock_is_region_reserved(start, size)) {
/* Could not reserve, skip it */
md->num_pages = 0;
- memblock_dbg(PFX "Could not reserve boot range "
+ memblock_dbg("Could not reserve boot range "
"[0x%010llx-0x%010llx]\n",
start, start+size-1);
} else
@@ -441,7 +442,7 @@ static void __init efi_systab_init(void *phys)
efi.systab = early_ioremap((unsigned long)efi_phys.systab,
sizeof(efi_system_table_t));
if (efi.systab == NULL)
- printk(KERN_ERR "Couldn't map the EFI system table!\n");
+ pr_err("Couldn't map the system table!\n");
memcpy(&efi_systab, efi.systab, sizeof(efi_system_table_t));
early_iounmap(efi.systab, sizeof(efi_system_table_t));
efi.systab = &efi_systab;
@@ -450,9 +451,9 @@ static void __init efi_systab_init(void *phys)
* Verify the EFI Table
*/
if (efi.systab->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
- printk(KERN_ERR "EFI system table signature incorrect!\n");
+ pr_err("System table signature incorrect!\n");
if ((efi.systab->hdr.revision >> 16) == 0)
- printk(KERN_ERR "Warning: EFI system table version "
+ pr_err("Warning: System table version "
"%d.%02d, expected 1.00 or greater!\n",
efi.systab->hdr.revision >> 16,
efi.systab->hdr.revision & 0xffff);
@@ -470,42 +471,42 @@ static void __init efi_config_init(u64 tables, int nr_tables)
efi.systab->tables,
efi.systab->nr_tables * sizeof(efi_config_table_t));
if (config_tables == NULL)
- printk(KERN_ERR "Could not map EFI Configuration Table!\n");
+ pr_err("Could not map Configuration table!\n");
- printk(KERN_INFO);
+ pr_info("");
for (i = 0; i < efi.systab->nr_tables; i++) {
if (!efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID)) {
efi.mps = config_tables[i].table;
- printk(" MPS=0x%lx ", config_tables[i].table);
+ pr_cont(" MPS=0x%lx ", config_tables[i].table);
} else if (!efi_guidcmp(config_tables[i].guid,
ACPI_20_TABLE_GUID)) {
efi.acpi20 = config_tables[i].table;
- printk(" ACPI 2.0=0x%lx ", config_tables[i].table);
+ pr_cont(" ACPI 2.0=0x%lx ", config_tables[i].table);
} else if (!efi_guidcmp(config_tables[i].guid,
ACPI_TABLE_GUID)) {
efi.acpi = config_tables[i].table;
- printk(" ACPI=0x%lx ", config_tables[i].table);
+ pr_cont(" ACPI=0x%lx ", config_tables[i].table);
} else if (!efi_guidcmp(config_tables[i].guid,
SMBIOS_TABLE_GUID)) {
efi.smbios = config_tables[i].table;
- printk(" SMBIOS=0x%lx ", config_tables[i].table);
+ pr_cont(" SMBIOS=0x%lx ", config_tables[i].table);
#ifdef CONFIG_X86_UV
} else if (!efi_guidcmp(config_tables[i].guid,
UV_SYSTEM_TABLE_GUID)) {
efi.uv_systab = config_tables[i].table;
- printk(" UVsystab=0x%lx ", config_tables[i].table);
+ pr_cont(" UVsystab=0x%lx ", config_tables[i].table);
#endif
} else if (!efi_guidcmp(config_tables[i].guid,
HCDP_TABLE_GUID)) {
efi.hcdp = config_tables[i].table;
- printk(" HCDP=0x%lx ", config_tables[i].table);
+ pr_cont(" HCDP=0x%lx ", config_tables[i].table);
} else if (!efi_guidcmp(config_tables[i].guid,
UGA_IO_PROTOCOL_GUID)) {
efi.uga = config_tables[i].table;
- printk(" UGA=0x%lx ", config_tables[i].table);
+ pr_cont(" UGA=0x%lx ", config_tables[i].table);
}
}
- printk("\n");
+ pr_cont("\n");
early_iounmap(config_tables,
efi.systab->nr_tables * sizeof(efi_config_table_t));
}
@@ -538,8 +539,7 @@ static void __init efi_runtime_init(void)
*/
efi.get_time = phys_efi_get_time;
} else
- printk(KERN_ERR "Could not map the EFI runtime service "
- "table!\n");
+ pr_err("Could not map the runtime service table!\n");
early_iounmap(runtime, sizeof(efi_runtime_services_t));
}
@@ -549,7 +549,7 @@ static void __init efi_memmap_init(void)
memmap.map = early_ioremap((unsigned long)memmap.phys_map,
memmap.nr_map * memmap.desc_size);
if (memmap.map == NULL)
- printk(KERN_ERR "Could not map the EFI memory map!\n");
+ pr_err("Could not map the memory map!\n");
memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size);
if (add_efi_memmap)
@@ -582,12 +582,12 @@ void __init efi_init(void)
vendor[i] = *c16++;
vendor[i] = '\0';
} else
- printk(KERN_ERR PFX "Could not map the firmware vendor!\n");
+ pr_err("Could not map the firmware vendor!\n");
early_iounmap(tmp, 2);
- printk(KERN_INFO "EFI v%u.%.02u by %s\n",
- efi.systab->hdr.revision >> 16,
- efi.systab->hdr.revision & 0xffff, vendor);
+ pr_info("EFI v%u.%.02u by %s\n",
+ efi.systab->hdr.revision >> 16,
+ efi.systab->hdr.revision & 0xffff, vendor);
efi_config_init(efi.systab->tables, efi.systab->nr_tables);
@@ -714,7 +714,7 @@ void __init efi_enter_virtual_mode(void)
md->virt_addr = (u64) (unsigned long) va;
if (!va) {
- printk(KERN_ERR PFX "ioremap of 0x%llX failed!\n",
+ pr_err("ioremap of 0x%llX failed!\n",
(unsigned long long)md->phys_addr);
continue;
}
@@ -741,8 +741,8 @@ void __init efi_enter_virtual_mode(void)
(efi_memory_desc_t *)__pa(new_memmap));
if (status != EFI_SUCCESS) {
- printk(KERN_ALERT "Unable to switch EFI into virtual mode "
- "(status=%lx)!\n", status);
+ pr_alert("Unable to switch EFI into virtual mode "
+ "(status=%lx)!\n", status);
panic("EFI call to SetVirtualAddressMap() failed!");
}
--
1.7.9.111.gf3fb0
next prev parent reply other threads:[~2012-02-08 0:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-08 0:25 [PATCH v4 0/5] [RESEND] x86: efi: cleanups and basic 32/64-bit support Olof Johansson
2012-02-08 0:25 ` [PATCH 1/5] x86: efi: refactor efi_init() a bit Olof Johansson
2012-02-08 0:25 ` Olof Johansson [this message]
2012-02-08 0:25 ` [PATCH 3/5] x86: efi: cleanup config table walking Olof Johansson
2012-02-08 0:25 ` [PATCH 4/5] x86: efi: add basic error handling Olof Johansson
2012-02-08 0:25 ` [PATCH 5/5] x86: efi: allow basic init with mixed 32/64-bit efi/kernel Olof Johansson
2012-02-08 18:31 ` Matt Fleming
2012-02-08 18:54 ` Olof Johansson
-- strict thread matches above, loose matches on Subject: below --
2012-01-03 17:11 [PATCH v3 0/5] x86: efi: cleanups and basic 32/64 bit support Olof Johansson
2012-01-03 17:11 ` [PATCH 2/5] x86: efi: convert printk to pr_*() Olof Johansson
2012-01-04 5:26 ` Joe Perches
2012-01-05 17:17 ` Olof Johansson
2012-01-05 21:02 ` [PATCH v4 0/5] x86: efi: cleanups and basic 32/64 bit support Olof Johansson
2012-01-05 21:02 ` [PATCH 2/5] x86: efi: convert printk to pr_*() Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328660732-27263-3-git-send-email-olof@lixom.net \
--to=olof@lixom.net \
--cc=hpa@zytor.com \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
--cc=matt.fleming@intel.com \
--cc=mingo@elte.hu \
--cc=mjg@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®