From: Alexander Stein <alexander.stein@systec-electronic.com>
To: Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org,
Alexander Stein <alexander.stein@systec-electronic.com>
Subject: [PATCH 2/2 RFC] rtc-pcf8563: Add RTC_VL_READ/RTC_VL_CLR ioctl feature
Date: Tue, 14 Feb 2012 17:13:45 +0100 [thread overview]
Message-ID: <1329236025-31323-2-git-send-email-alexander.stein@systec-electronic.com> (raw)
In-Reply-To: <1329236025-31323-1-git-send-email-alexander.stein@systec-electronic.com>
Changes are based on arch/cris/arch-v10/drivers/pcf8563.c
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
---
drivers/rtc/rtc-pcf8563.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 43 insertions(+), 1 deletions(-)
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index 606fdfa..0ba4ae7 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -64,6 +64,7 @@ struct pcf8563 {
* 1970...2069.
*/
int c_polarity; /* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
+ int voltage_low; /* incicates if a low_voltage was detected */
};
/*
@@ -86,9 +87,11 @@ static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm)
return -EIO;
}
- if (buf[PCF8563_REG_SC] & PCF8563_SC_LV)
+ if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) {
+ pcf8563->voltage_low = 1;
dev_info(&client->dev,
"low voltage detected, date/time is not reliable.\n");
+ }
dev_dbg(&client->dev,
"%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
@@ -173,6 +176,44 @@ static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
return 0;
}
+#ifdef CONFIG_RTC_INTF_DEV
+static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ struct pcf8563 *pcf8563 = i2c_get_clientdata(to_i2c_client(dev));
+ struct rtc_time tm;
+
+ switch (cmd) {
+ case RTC_VL_READ:
+ if (pcf8563->voltage_low)
+ dev_info(dev, "low voltage detected, date/time is not reliable.\n");
+
+ if (copy_to_user((int *) arg, &pcf8563->voltage_low,
+ sizeof(int)))
+ return -EFAULT;
+ return 0;
+ case RTC_VL_CLR:
+ /*
+ * Clear the VL bit in the seconds register in case
+ * the time has not been set already (which would
+ * have cleared it). This does not really matter
+ * because of the cached voltage_low value but do it
+ * anyway for consistency.
+ */
+ if (pcf8563_get_datetime(to_i2c_client(dev), &tm))
+ pcf8563_set_datetime(to_i2c_client(dev), &tm);
+
+ /* Clear the cached value. */
+ pcf8563->voltage_low = 0;
+
+ return 0;
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+#else
+#define pcf8563_rtc_ioctl NULL
+#endif
+
static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
return pcf8563_get_datetime(to_i2c_client(dev), tm);
@@ -184,6 +225,7 @@ static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
}
static const struct rtc_class_ops pcf8563_rtc_ops = {
+ .ioctl = pcf8563_rtc_ioctl,
.read_time = pcf8563_rtc_read_time,
.set_time = pcf8563_rtc_set_time,
};
--
1.7.3.4
next prev parent reply other threads:[~2012-02-14 16:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-14 16:13 [PATCH 1/2 RFC] rtc: Add ioctl to get/clear battery low voltage status Alexander Stein
2012-02-14 16:13 ` Alexander Stein [this message]
2012-04-04 22:27 ` [rtc-linux] [PATCH 2/2 RFC] rtc-pcf8563: Add RTC_VL_READ/RTC_VL_CLR ioctl feature Andrew Morton
2012-04-05 9:59 ` Jesper Nilsson
2012-03-20 13:16 ` [PATCH 1/2 RFC] rtc: Add ioctl to get/clear battery low voltage status Alexander Stein
2012-04-04 22:23 ` [rtc-linux] " Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1329236025-31323-2-git-send-email-alexander.stein@systec-electronic.com \
--to=alexander.stein@systec-electronic.com \
--cc=a.zummo@towertech.it \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®