From: Karol Lewandowski <k.lewandowsk@samsung.com>
To: myungjoo.ham@samsung.com
Cc: kyungmin.park@samsung.com, m.szyprowski@samsung.com,
devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, cbou@mail.ru,
Karol Lewandowski <k.lewandowsk@samsung.com>
Subject: [PATCH 3/3] max17042_battery: Make it possible to instantiate driver from DT
Date: Wed, 22 Feb 2012 19:06:22 +0100 [thread overview]
Message-ID: <1329933982-2529-4-git-send-email-k.lewandowsk@samsung.com> (raw)
In-Reply-To: <1329933982-2529-1-git-send-email-k.lewandowsk@samsung.com>
Allow both device tree (preferred) and platform data-based driver
instantiation.
Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
.../bindings/power_supply/max17042_battery.txt | 18 ++++++++
drivers/power/max17042_battery.c | 45 ++++++++++++++++++--
2 files changed, 59 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/max17042_battery.txt
diff --git a/Documentation/devicetree/bindings/power_supply/max17042_battery.txt b/Documentation/devicetree/bindings/power_supply/max17042_battery.txt
new file mode 100644
index 0000000..5bc9b68
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/max17042_battery.txt
@@ -0,0 +1,18 @@
+max17042_battery
+~~~~~~~~~~~~~~~~
+
+Required properties :
+ - compatible : "maxim,max17042"
+
+Optional properties :
+ - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms
+ (datasheet-recommended value is 10000).
+ Defining this property enables current-sense functionality.
+
+Example:
+
+ battery-charger@36 {
+ compatible = "maxim,max17042";
+ reg = <0x36>;
+ maxim,rsns-microohm = <10000>;
+ };
diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c
index 49c1377..aec883b 100644
--- a/drivers/power/max17042_battery.c
+++ b/drivers/power/max17042_battery.c
@@ -29,6 +29,7 @@
#include <linux/mod_devicetable.h>
#include <linux/power_supply.h>
#include <linux/power/max17042_battery.h>
+#include <linux/of.h>
struct max17042_chip {
struct i2c_client *client;
@@ -211,6 +212,31 @@ static int max17042_get_property(struct power_supply *psy,
return 0;
}
+#ifdef CONFIG_OF
+static int max17042_dt_parse(struct max17042_chip *chip, struct device_node *np)
+{
+ u32 prop;
+
+ if (!np)
+ return -EINVAL;
+
+ /* require current sense resistor value to be specified for
+ current-sense functionality to be enabled at all */
+ if (of_property_read_u32(np, "maxim,rsns-microohm", &prop) == 0) {
+ chip->r_sns = prop;
+ chip->enable_current_sense = true;
+ } else
+ chip->enable_current_sense = false;
+
+ return 0;
+}
+#else
+static int max17042_dt_parse(struct max17042_chip *chip, struct device_node *np)
+{
+ return -EINVAL;
+}
+#endif
+
static int __devinit max17042_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -237,12 +263,14 @@ static int __devinit max17042_probe(struct i2c_client *client,
chip->battery.properties = max17042_battery_props;
chip->battery.num_properties = ARRAY_SIZE(max17042_battery_props);
- if (pdata) {
+ ret = max17042_dt_parse(chip, client->dev.of_node);
+ if (ret < 0) {
+ if (!pdata) {
+ dev_warn(&client->dev, "no driver data provided\n");
+ return -ENODEV;
+ }
chip->r_sns = pdata->r_sns;
chip->enable_current_sense = pdata->enable_current_sense;
- } else {
- dev_warn(&client->dev, "no driver data provided\n");
- return -ENODEV;
}
/* When current is not measured,
@@ -281,6 +309,14 @@ static int __devexit max17042_remove(struct i2c_client *client)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id max17042_dt_match[] = {
+ { .compatible = "maxim,max17042" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, max17042_dt_match);
+#endif
+
static const struct i2c_device_id max17042_id[] = {
{ "max17042", 0 },
{ }
@@ -290,6 +326,7 @@ MODULE_DEVICE_TABLE(i2c, max17042_id);
static struct i2c_driver max17042_i2c_driver = {
.driver = {
.name = "max17042",
+ .of_match_table = of_match_ptr(max17042_dt_match),
},
.probe = max17042_probe,
.remove = __devexit_p(max17042_remove),
--
1.7.8.3
next prev parent reply other threads:[~2012-02-22 18:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-22 18:06 [PATCH 0/3] power: max17042_battery: Add DT bindings Karol Lewandowski
2012-02-22 18:06 ` [PATCH 1/3] max17042_battery: Use devm_kzalloc() where applicable Karol Lewandowski
2012-03-13 19:18 ` Anton Vorontsov
2012-02-22 18:06 ` [PATCH 2/3] max17042_battery: Preserve properties outside of platform data Karol Lewandowski
2012-03-13 19:21 ` Anton Vorontsov
2012-03-14 9:14 ` Karol Lewandowski
2012-02-22 18:06 ` Karol Lewandowski [this message]
2012-03-13 19:22 ` [PATCH 3/3] max17042_battery: Make it possible to instantiate driver from DT Anton Vorontsov
2012-03-14 12:29 ` Karol Lewandowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1329933982-2529-4-git-send-email-k.lewandowsk@samsung.com \
--to=k.lewandowsk@samsung.com \
--cc=cbou@mail.ru \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®