From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754501Ab2BWMKp (ORCPT ); Thu, 23 Feb 2012 07:10:45 -0500 Received: from comal.ext.ti.com ([198.47.26.152]:46311 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753656Ab2BWMKl (ORCPT ); Thu, 23 Feb 2012 07:10:41 -0500 From: Tarun Kanti DebBarma To: CC: , , , , , Tarun Kanti DebBarma Subject: [PATCH 6/6] gpio/omap: fix _set_gpio_irqenable implementation Date: Thu, 23 Feb 2012 17:40:31 +0530 Message-ID: <1329999031-6914-7-git-send-email-tarun.kanti@ti.com> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: <1329999031-6914-1-git-send-email-tarun.kanti@ti.com> References: <1329999031-6914-1-git-send-email-tarun.kanti@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This function should be capable of both enabling and disabling interrupts based upon the *enable* parameter. Right now the function only enables the interrupt and *enable* is not used at all. So add the interrupt disable capability also using the parameter. Signed-off-by: Tarun Kanti DebBarma --- drivers/gpio/gpio-omap.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 67535c8..acc71a0 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -473,7 +473,10 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) { - _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio)); + if (enable) + _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio)); + else + _disable_gpio_irqbank(bank, GPIO_BIT(bank, gpio)); } /* -- 1.7.0.4