From: zhaoy <zhaoy@marvell.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, nicolas.pitre@linaro.org,
linux@arm.linux.org.uk, hzhuang1@marvell.com, cxie4@marvell.com,
leoy@marvell.com
Cc: zhaoy <zhaoy@marvell.com>
Subject: [PATCH 06/13] mmp3:register dma devices for mmp3 platform
Date: Tue, 28 Feb 2012 15:27:38 +0800 [thread overview]
Message-ID: <1330414065-2949-7-git-send-email-zhaoy@marvell.com> (raw)
In-Reply-To: <Y>
1.register dma device for mmp3 platform
Change-Id: I93675ca4df66c17e08d6d64e3352d5bccf8afa9c
Signed-off-by: zhaoy <zhaoy@marvell.com>
---
arch/arm/mach-mmp/mmp3.c | 78 ++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 76 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mmp/mmp3.c b/arch/arm/mach-mmp/mmp3.c
index 8ae7d1f..a98c611 100644
--- a/arch/arm/mach-mmp/mmp3.c
+++ b/arch/arm/mach-mmp/mmp3.c
@@ -249,6 +249,80 @@ struct platform_device mmp3_device_asoc_hdmi = {
.id = -1,
};
+static struct resource mmp3_adma_resource[] = {
+ [0] = {
+ .name = "reg_phys",
+ .start = 0xc0ffd800,
+ .end = 0xc0ffd800 + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "adma_irq",
+ .start = IRQ_MMP3_DMA_SECONDARY(18),
+ .end = IRQ_MMP3_DMA_SECONDARY(21),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct mmp_tdma_chan_info amda_chan_info[] = {
+ [0] = {
+ .type = ADMA1_CH0,
+ .reg_base = 0xc0ffd800,
+ },
+ [1] = {
+ .type = ADMA1_CH1,
+ .reg_base = 0xc0ffd804,
+ },
+ [2] = {
+ .type = ADMA2_CH0,
+ .reg_base = 0xc0ffd900,
+ },
+ [3] = {
+ .type = ADMA2_CH1,
+ .reg_base = 0xc0ffd904,
+ },
+};
+
+struct mmp_tdma_platform_data amda_platform_data = {
+ .nr_ch = 4,
+ .info = amda_chan_info,
+};
+
+static struct platform_device mmp3_device_adma = {
+ .name = "mmp-adma",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mmp3_adma_resource),
+ .resource = mmp3_adma_resource,
+ .dev = {
+ .platform_data = &amda_platform_data,
+ },
+};
+
+static struct resource mmp3_dmac_resource[] = {
+ [0] = {
+ .name = "reg_phys",
+ .start = 0xd4000000,
+ .end = 0xd4000000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct pxa_dmac_platform_data dmac_platform_data = {
+ .irq_base = IRQ_MMP3_DMA_BASE,
+ .nr_ch = 16,
+};
+
+static struct platform_device mmp3_device_dmac = {
+ .name = "pxa-dmac",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mmp3_dmac_resource),
+ .resource = mmp3_dmac_resource,
+ .dev = {
+ .platform_data = &dmac_platform_data,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ },
+};
+
static int __init mmp3_init(void)
{
/*
@@ -263,8 +337,8 @@ static int __init mmp3_init(void)
mmp3_init_gpio();
- pxa_init_dma(IRQ_MMP3_DMA_RIQ, 16);
- mmp_init_dma(IRQ_MMP3_DMA_RIQ);
+ platform_device_register(&mmp3_device_dmac);
+ platform_device_register(&mmp3_device_adma);
platform_device_register(&mmp3_device_asoc_sspa1);
platform_device_register(&mmp3_device_asoc_platform);
--
1.7.0.4
next prev parent reply other threads:[~2012-02-28 7:30 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Y>
2012-02-28 7:27 ` [PATCH 00/13] Enable DMA engine for mmp2 and mmp3 zhaoy
2012-02-28 8:41 ` Haojian Zhuang
2012-02-28 8:49 ` Zhao Ye
2012-02-28 7:27 ` [PATCH 01/13] DMA:define second level irq definition zhaoy
2012-02-28 7:27 ` [PATCH 02/13] dmaengine:open dmac and tdma support zhaoy
2012-02-28 7:27 ` [PATCH 03/13] dmaengine: mmp: add two-channel dma driver zhaoy
2012-02-28 7:27 ` [PATCH 04/13] dmaengine:mmp add peripheral " zhaoy
2012-02-28 7:27 ` [PATCH 05/13] mmp2:register dma devices for mmp2 platform zhaoy
2012-02-28 7:27 ` zhaoy [this message]
2012-02-28 7:27 ` [PATCH 07/13] DMA:mmp:remove redundant dma drivers zhaoy
2012-02-28 12:30 ` Sergei Shtylyov
2012-02-28 7:27 ` [PATCH 08/13] DMAC:tty serial pxa use generic dma engine APIs zhaoy
2012-02-28 7:27 ` [PATCH 09/13] DMA:remove unnecessary dma configurations zhaoy
2012-02-28 7:27 ` [PATCH 10/13] dmaengine:audio:mmp audio use generic dma engine APIs zhaoy
2012-02-28 7:27 ` [PATCH 11/13] DMA:update defconfig for mmp3 zhaoy
2012-02-28 7:27 ` [PATCH 12/13] mdma:dmaengine:update mdma for tdma zhaoy
2012-02-28 7:27 ` [PATCH 13/13] DMA:update defconfig for mmp2 zhaoy
2012-02-28 7:42 ` Zhao Ye
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330414065-2949-7-git-send-email-zhaoy@marvell.com \
--to=zhaoy@marvell.com \
--cc=cxie4@marvell.com \
--cc=hzhuang1@marvell.com \
--cc=leoy@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=nicolas.pitre@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®