From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1761640Ab2CNW26 (ORCPT ); Wed, 14 Mar 2012 18:28:58 -0400 Received: from mail-gx0-f174.google.com ([209.85.161.174]:43716 "EHLO mail-gx0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753621Ab2CNW2u (ORCPT ); Wed, 14 Mar 2012 18:28:50 -0400 From: Andrew Miller To: gregkh@linuxfoundation.org Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, amiller@amilx.com Subject: [PATCH 1/3] Staging: rtl8187se: r8180_core.c: Removed trailing spaces Date: Wed, 14 Mar 2012 18:26:57 -0400 Message-Id: <1331764019-5808-2-git-send-email-amiller@amilx.com> X-Mailer: git-send-email 1.7.7.6 In-Reply-To: <1331764019-5808-1-git-send-email-amiller@amilx.com> References: <1331764019-5808-1-git-send-email-amiller@amilx.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Cleaned up some trailing spaces Signed-off-by: Andrew Miller --- drivers/staging/rtl8187se/r8180_core.c | 26 +++++++++++++------------- 1 files changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index e6e39c8..d1a3e65 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -1619,9 +1619,9 @@ void rtl8180_rx(struct net_device *dev) !bHwError && !bCRC && !bICV && eqMacAddr(priv->ieee80211->current_network.bssid, fc & IEEE80211_FCTL_TODS ? hdr->addr1 : - fc & IEEE80211_FCTL_FROMDS ? hdr->addr2 : + fc & IEEE80211_FCTL_FROMDS ? hdr->addr2 : hdr->addr3)) { - + /* Perform signal smoothing for dynamic * mechanism on demand. This is different * with PerformSignalSmoothing8185 in smoothing @@ -1658,7 +1658,7 @@ void rtl8180_rx(struct net_device *dev) } /* support for prism header has been originally added by Christian */ if (priv->prism_hdr && priv->ieee80211->iw_mode == IW_MODE_MONITOR) { - + } else { priv->rx_skb = dev_alloc_skb(len+2); if (!priv->rx_skb) @@ -1770,7 +1770,7 @@ void rtl8180_data_hard_resume(struct net_device *dev) rtl8180_set_mode(dev, EPROM_CMD_NORMAL); } -/* +/* * This function TX data frames when the ieee80211 stack requires this. * It checks also if we need to stop the ieee tx queue, eventually do it */ @@ -1814,7 +1814,7 @@ rate) { spin_unlock_irqrestore(&priv->tx_lock, flags); } -/* +/* * This is a rough attempt to TX a frame * This is called by the ieee 80211 stack to TX management frames. * If the ring is full packet are dropped (for data frame the queue @@ -1920,7 +1920,7 @@ void rtl8180_prepare_beacon(struct net_device *dev) } } -/* +/* * This function do the real dirty work: it enqueues a TX command * descriptor in the ring buffer, copyes the frame in a TX buffer * and kicks the NIC to ensure it does the DMA transfer. @@ -2188,7 +2188,7 @@ short rtl8180_tx(struct net_device *dev, u8* txbuf, int len, int priority, priv->txhpbufstail = buflist; break; case BEACON_PRIORITY: - /* + /* * The HW seems to be happy with the 1st * descriptor filled and the 2nd empty... * So always update descriptor 1 and never @@ -2308,13 +2308,13 @@ void rtl8180_hw_sleep(struct net_device *dev, u32 th, u32 tl) spin_lock_irqsave(&priv->ps_lock, flags); - /* + /* * Writing HW register with 0 equals to disable * the timer, that is not really what we want */ tl -= MSECS(4+16+7); - /* + /* * If the interval in witch we are requested to sleep is too * short then give up and remain awake */ @@ -2332,7 +2332,7 @@ void rtl8180_hw_sleep(struct net_device *dev, u32 th, u32 tl) queue_delayed_work(priv->ieee80211->wq, &priv->ieee80211->hw_wakeup_wq, tmp); /* as tl may be less than rb */ } - /* + /* * If we suspect the TimerInt is gone beyond tl * while setting it, then give up */ @@ -3172,7 +3172,7 @@ void rtl8180_adapter_start(struct net_device *dev) netif_start_queue(dev); } -/* +/* * This configures registers for beacon tx and enables it via * rtl8180_beacon_tx_enable(). rtl8180_beacon_tx_disable() might * be used to stop beacon transmission @@ -3843,7 +3843,7 @@ void rtl8180_tx_isr(struct net_device *dev, int pri, short error) return; } - /* + /* * We check all the descriptors between the head and the nic, * but not the currently pointed by the nic (the next to be txed) * and the previous of the pointed (might be in process ??) @@ -3881,7 +3881,7 @@ void rtl8180_tx_isr(struct net_device *dev, int pri, short error) head += 8; } - /* + /* * The head has been moved to the last certainly TXed * (or at least processed by the nic) packet. * The driver take forcefully owning of all these packets -- 1.7.7.6