From: Marc Reilly <marc@cpdesign.com.au>
To: broonie@opensource.wolfsonmicro.com
Cc: linux-kernel@vger.kernel.org, Marc Reilly <marc@cpdesign.com.au>
Subject: [PATCH 2/2] regmap: Use pad_bits and reg_bits when determining register format.
Date: Fri, 16 Mar 2012 12:11:43 +1100 [thread overview]
Message-ID: <1331860303-9483-2-git-send-email-marc@cpdesign.com.au> (raw)
In-Reply-To: <1331860303-9483-1-git-send-email-marc@cpdesign.com.au>
This change combines any padding bits into the register address bits when
determining register format handlers to use the next byte-divisible
register size.
A reg_shift member is introduced to the regmap struct to enable fixup
of the reg format.
Format handlers now take an extra parameter specifying the number of
bits to shift the value by.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
---
drivers/base/regmap/internal.h | 7 +++++--
drivers/base/regmap/regmap.c | 27 +++++++++++++++------------
2 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index e93d7b7..7b1411d 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -26,8 +26,8 @@ struct regmap_format {
size_t val_bytes;
void (*format_write)(struct regmap *map,
unsigned int reg, unsigned int val);
- void (*format_reg)(void *buf, unsigned int reg);
- void (*format_val)(void *buf, unsigned int val);
+ void (*format_reg)(void *buf, unsigned int reg, unsigned int shift);
+ void (*format_val)(void *buf, unsigned int val, unsigned int shift);
unsigned int (*parse_val)(void *buf);
};
@@ -52,6 +52,9 @@ struct regmap {
u8 read_flag_mask;
u8 write_flag_mask;
+ /* number of bits to (left) shift the reg value when formatting*/
+ int reg_shift;
+
/* regcache specific members */
const struct regcache_ops *cache_ops;
enum regcache_type cache_type;
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 9cfe203..ca08592 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -112,34 +112,36 @@ static void regmap_format_10_14_write(struct regmap *map,
out[0] = reg >> 2;
}
-static void regmap_format_8(void *buf, unsigned int val)
+static void regmap_format_8(void *buf, unsigned int val, unsigned int shift)
{
u8 *b = buf;
- b[0] = val;
+ b[0] = val << shift;
}
-static void regmap_format_16(void *buf, unsigned int val)
+static void regmap_format_16(void *buf, unsigned int val, unsigned int shift)
{
__be16 *b = buf;
- b[0] = cpu_to_be16(val);
+ b[0] = cpu_to_be16(val << shift);
}
-static void regmap_format_24(void *buf, unsigned int val)
+static void regmap_format_24(void *buf, unsigned int val, unsigned int shift)
{
u8 *b = buf;
+ val <<= shift;
+
b[0] = val >> 16;
b[1] = val >> 8;
b[2] = val;
}
-static void regmap_format_32(void *buf, unsigned int val)
+static void regmap_format_32(void *buf, unsigned int val, unsigned int shift)
{
__be32 *b = buf;
- b[0] = cpu_to_be32(val);
+ b[0] = cpu_to_be32(val << shift);
}
static unsigned int regmap_parse_8(void *buf)
@@ -210,6 +212,7 @@ struct regmap *regmap_init(struct device *dev,
map->format.pad_bytes = config->pad_bits / 8;
map->format.val_bytes = DIV_ROUND_UP(config->val_bits, 8);
map->format.buf_size += map->format.pad_bytes;
+ map->reg_shift = config->pad_bits % 8;
map->dev = dev;
map->bus = bus;
map->max_register = config->max_register;
@@ -226,7 +229,7 @@ struct regmap *regmap_init(struct device *dev,
map->read_flag_mask = bus->read_flag_mask;
}
- switch (config->reg_bits) {
+ switch (config->reg_bits + map->reg_shift) {
case 2:
switch (config->val_bits) {
case 6:
@@ -392,7 +395,7 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg,
if (!map->writeable_reg(map->dev, reg + i))
return -EINVAL;
- map->format.format_reg(map->work_buf, reg);
+ map->format.format_reg(map->work_buf, reg, map->reg_shift);
u8[0] |= map->write_flag_mask;
@@ -467,7 +470,7 @@ int _regmap_write(struct regmap *map, unsigned int reg,
return ret;
} else {
map->format.format_val(map->work_buf + map->format.reg_bytes
- + map->format.pad_bytes, val);
+ + map->format.pad_bytes, val, 0);
return _regmap_raw_write(map, reg,
map->work_buf +
map->format.reg_bytes +
@@ -541,7 +544,7 @@ static int _regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
u8 *u8 = map->work_buf;
int ret;
- map->format.format_reg(map->work_buf, reg);
+ map->format.format_reg(map->work_buf, reg, map->reg_shift);
/*
* Some buses or devices flag reads by setting the high bits in the
@@ -649,7 +652,7 @@ int regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
if (ret != 0)
goto out;
- map->format.format_val(val + (i * val_bytes), v);
+ map->format.format_val(val + (i * val_bytes), v, 0);
}
}
--
1.7.3.4
next prev parent reply other threads:[~2012-03-16 2:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-16 1:11 [PATCH 1/2] regmap: Add support for device with 24 data bits Marc Reilly
2012-03-16 1:11 ` Marc Reilly [this message]
2012-03-17 22:06 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1331860303-9483-2-git-send-email-marc@cpdesign.com.au \
--to=marc@cpdesign.com.au \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®