From: Arnd Bergmann <arnd@arndb.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, arm@kernel.org,
Arnd Bergmann <arnd@arndb.de>
Subject: [GIT PULL 01/09] ARM: Non-critical bug fixes
Date: Sat, 24 Mar 2012 22:02:38 +0000 [thread overview]
Message-ID: <1332626568-17812-2-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1332626568-17812-1-git-send-email-arnd@arndb.de>
Simple bug fixes that were not considered important enough for inclusion
into 3.3. One bug fix was originally intended for 3.3 but accidentally
got missed, but is not marked stable because it should only get
backported once later fixes also make it into v3.4.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The following changes since commit "6a3c812 Merge branch
'next/fixes-non-critical' into for-next", leading up to commit " 489e7be
Merge branch 'fixes' into next/fixes-non-critical", are available in
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/fixes-non-critical
Afzal Mohammed (1):
ARM: OMAP2+: id: Add am33xx SoC type detection
Arnd Bergmann (13):
Merge branch 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into next/fixes-non-critical
Merge branch 'v3.4/fixes' of git://gitorious.org/linux-davinci/linux-davinci into next/fixes-non-critical
Merge branch 'lpc32xx/fixes-non-critical' of git://git.antcom.de/linux-2.6 into next/fixes-non-critical
ARM: ux500: U8500 depends on MMU
ARM: ux500: add board autoselection
ARM: ux500: select L2X0 cache on ux500
ARM: ux500: select CPU_FREQ_TABLE where needed
Merge branch 'fixes-non-critical' of git://git.kernel.org/.../tmlind/linux-omap into next/fixes-non-critical
Merge branch 'ux500-fixes-20120301' of git://git.kernel.org/.../linusw/linux-stericsson into next/fixes-non-critical
Merge tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6 into next/fixes-non-critical
Merge branch 'fixes' of git://gitorious.org/linux-davinci/linux-davinci into next/fixes-non-critical
Merge branch 'fixes' into next/fixes-non-critical
Merge branch 'next/fixes-non-critical' into for-next
Bernhard Walle (1):
ARM: OMAP2+: GPMC: Export gpmc_enable_hwecc and gpmc_calculate_ecc
Danny Kukawka (3):
ARM: ux500: included linux/gpio.h twice
ARM: OMAP: clock.c: included linux/debugfs.h twice
ARM: OMAP2+: included some headers twice
Fabio Estevam (3):
ARM: mach-pcm038: Fix field name of regulator_consumer_supply struct
ARM: imx_v4_v5_defconfig: Fix the selection of 32 bit flash support for iMX21ADS board
ARM: mach-imx: mx3: Fix section mismatch in imx3_init_l2x0()
Felipe Contreras (1):
ARM: OMAP: mailbox: trivial whitespace fix
Grazvydas Ignotas (1):
ARM: omap: pandora: fix usbhs platform data
Heiko Schocher (1):
ARM: davinci: map default_queue to edma channels
Ilya Yanok (1):
ARM: OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided
Jon Hunter (1):
ARM: OMAP: Remove definition cpu_is_omap4430()
Kevin Hilman (4):
ARM: OMAP: convert omap_device_build() and callers to __init
ARM: OMAP2+: PM: fix section mismatch with omap2_init_processor_devices()
ARM: OMAP2+: PM: fix wakeupgen warning when hotplug disabled
ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance
Linus Walleij (2):
ARM: ux500: delete TPS6105X selection
ARM: ux500: solve some Kconfig mess
Masanari Iida (1):
ARM: OMAP1: Fix typo in lcd_dma.c
Mehnert (1):
iomux-mx25.h slew rate adjusted for LCD __LD pins
Ohad Ben-Cohen (2):
ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register}
ARM: OMAP: don't build hwspinlock in vain
Ola Lilja (3):
ARM: ux500: Add placeholder for clk_set_parent
ARM: ux500: Add DMA-channels for MSP
ARM: ux500: Add audio-regulators
Olof Johansson (4):
Merge branch 'fixes-non-critical' of git://git.kernel.org/.../tmlind/linux-omap into next/fixes-non-critical
Merge branch 'fixes-non-critical-part2' of git://git.kernel.org/.../tmlind/linux-omap into next/fixes-non-critical
Merge branch 'fixes-non-critical-part3' of git://git.kernel.org/.../tmlind/linux-omap into next/fixes-non-critical
Merge branch 'fix-smsc911x-regulator' of git://git.kernel.org/.../tmlind/linux-omap into fixes
Paul Walmsley (1):
ARM: OMAP2+: I2C: always compile I2C reset code, even if I2C driver is not built
Peter Ujfalusi (1):
OMAP4: dma: Correct CPU version check for dma_common_ch_end
Philippe Langlais (2):
ARM: ux500: set ARCH_NR_GPIO to 355 on U8500 platforms
ARM: ux500: fix around AB8500 GPIO macro name
Roland Stigge (8):
ARM: LPC32xx: Added lpc32xx_defconfig
ARM: LPC32xx: clock.c: warning fix
ARM: LPC32xx: clock.c: Fix mutex lock issues
ARM: LPC32XX: Remove broken non-static declaration
ARM: LPC32xx: clock.c: Missing header file
ARM: LPC32xx: clock.c: jiffies wrapping
ARM: LPC32xx: clock.c: Clock registration fixes
ARM: LPC32xx: Fix missing and bad LPC32XX macros
Santosh Shilimkar (2):
ARM: OMAP: fix section mismatch warning for omap4_hotplug_cpu()
ARM: OMAP: Fix section mismatch warning for platform_cpu_die()
Tarun Kanti DebBarma (1):
ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support
Tony Lindgren (18):
ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
ARM: OMAP2+: Fix Kconfig dependencies for USB_ARCH_HAS_EHCI
ARM: OMAP2+: Fix OMAP_HDQ_BASE build error
ARM: OMAP2+: Fix board_mux section type conflict when OMAP_MUX is not set
ARM: OMAP2+: Fix zoom LCD backlight if TWL_CORE is not selected
ARM: OMAP2+: Fix devexit for smartreflex when CONFIG_HOTPLUG is not set
ARM: OMAP: Fix devexit for dma when CONFIG_HOTPLUG is not set
ARM: OMAP2+: Fix multiple randconfig errors with SOC_OMAP and SOC_OMAP_NOOP
ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init
Merge branch 'randconfig' into fixes-non-critical
Merge branch 'hsmmc' into fixes-non-critical
Revert "ARM: OMAP2+: Fix multiple randconfig errors with SOC_OMAP and SOC_OMAP_NOOP"
ARM: OMAP1: Fix section mismatch for omap1_init_early()
ARM: OMAP2+: Fix omap24xx_io_desc warning if SoC subtypes are not selected
ARM: OMAP2: Fix section warning for n8x0 when CONFIG_MMC_OMAP is not set
ARM: OMAP2+: Fix build issues with missing include of linux/bug.h
ARM: OMAP2+: Fix section warnings for hsmmc_init_one
ARM: OMAP2+: Fix build for omap4 only builds with missing include of linux/bug.h
Uwe Kleine-König (2):
ARM: davinci: cpufreq: fix compiler warning
ARM: davinci: DA850: move da850_register_pm to .init.text
Vaibhav Bedia (1):
ARM: OMAP: sram: Add am33xx SRAM support (minimal)
Wolfram Sang (1):
arm: lpc32xx: phy3250: add rtc & touch device
Yuan Jiangli (1):
ARM: OMAP3+: PM: VP: fix integer truncation error
arch/arm/Kconfig | 3 +-
arch/arm/configs/imx_v4_v5_defconfig | 1 +
arch/arm/configs/lpc32xx_defconfig | 145 +++++++++++++++++++++++++
arch/arm/mach-davinci/cpufreq.c | 2 +-
arch/arm/mach-davinci/da850.c | 2 +-
arch/arm/mach-davinci/dma.c | 6 +-
arch/arm/mach-davinci/include/mach/edma.h | 5 +
arch/arm/mach-imx/mach-pcm038.c | 2 +-
arch/arm/mach-imx/mm-imx3.c | 2 +-
arch/arm/mach-lpc32xx/clock.c | 62 ++++-------
arch/arm/mach-lpc32xx/common.h | 1 -
arch/arm/mach-lpc32xx/include/mach/platform.h | 51 +++++----
arch/arm/mach-lpc32xx/phy3250.c | 2 +
arch/arm/mach-lpc32xx/pm.c | 2 +-
arch/arm/mach-lpc32xx/timer.c | 48 ++++----
arch/arm/mach-omap1/io.c | 2 +-
arch/arm/mach-omap2/Kconfig | 4 +-
arch/arm/mach-omap2/Makefile | 9 +-
arch/arm/mach-omap2/board-2430sdp.c | 2 +-
arch/arm/mach-omap2/board-3430sdp.c | 5 +-
arch/arm/mach-omap2/board-4430sdp.c | 4 +-
arch/arm/mach-omap2/board-am3517evm.c | 2 +-
arch/arm/mach-omap2/board-cm-t35.c | 5 +-
arch/arm/mach-omap2/board-devkit8000.c | 4 +-
arch/arm/mach-omap2/board-flash.c | 2 +-
arch/arm/mach-omap2/board-igep0020.c | 6 +-
arch/arm/mach-omap2/board-ldp.c | 3 +-
arch/arm/mach-omap2/board-n8x0.c | 8 +-
arch/arm/mach-omap2/board-omap3beagle.c | 10 ++-
arch/arm/mach-omap2/board-omap3evm.c | 7 +-
arch/arm/mach-omap2/board-omap3logic.c | 2 +-
arch/arm/mach-omap2/board-omap3pandora.c | 15 ++-
arch/arm/mach-omap2/board-omap3stalker.c | 15 ++-
arch/arm/mach-omap2/board-omap3touchbook.c | 17 ++--
arch/arm/mach-omap2/board-omap4panda.c | 6 +-
arch/arm/mach-omap2/board-overo.c | 3 +-
arch/arm/mach-omap2/board-rm680.c | 2 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
arch/arm/mach-omap2/board-zoom-display.c | 4 +
arch/arm/mach-omap2/board-zoom-peripherals.c | 4 +-
arch/arm/mach-omap2/clkt_clksel.c | 1 +
arch/arm/mach-omap2/common-board-devices.c | 8 +-
arch/arm/mach-omap2/control.h | 5 +
arch/arm/mach-omap2/devices.c | 15 ++--
arch/arm/mach-omap2/display.c | 8 +-
arch/arm/mach-omap2/dma.c | 2 +-
arch/arm/mach-omap2/gpio.c | 2 +-
arch/arm/mach-omap2/gpmc-smsc911x.c | 11 ++-
arch/arm/mach-omap2/gpmc.c | 2 +
arch/arm/mach-omap2/hsmmc.c | 123 ++++++++++++++++-----
arch/arm/mach-omap2/hsmmc.h | 12 ++-
arch/arm/mach-omap2/id.c | 2 +
arch/arm/mach-omap2/io.c | 3 +-
arch/arm/mach-omap2/mcbsp.c | 2 +-
arch/arm/mach-omap2/mux.c | 16 ++--
arch/arm/mach-omap2/mux.h | 2 +-
arch/arm/mach-omap2/omap-hotplug.c | 2 +-
arch/arm/mach-omap2/omap-mpuss-lowpower.c | 2 +-
arch/arm/mach-omap2/omap-wakeupgen.c | 53 +++++-----
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 1 -
arch/arm/mach-omap2/pm.c | 4 +-
arch/arm/mach-omap2/powerdomain-common.c | 1 +
arch/arm/mach-omap2/powerdomain2xxx_3xxx.c | 1 +
arch/arm/mach-omap2/powerdomain44xx.c | 1 +
arch/arm/mach-omap2/powerdomains3xxx_data.c | 1 +
arch/arm/mach-omap2/smartreflex.c | 2 +-
arch/arm/mach-omap2/sr_device.c | 2 +-
arch/arm/mach-omap2/vc.c | 1 +
arch/arm/mach-omap2/vp.c | 4 +-
arch/arm/mach-ux500/Kconfig | 44 +++++---
arch/arm/mach-ux500/Makefile | 2 +-
arch/arm/mach-ux500/board-mop500-regulators.c | 28 +++++
arch/arm/mach-ux500/board-mop500-u8500uib.c | 1 -
arch/arm/mach-ux500/board-mop500.c | 2 +-
arch/arm/mach-ux500/board-mop500.h | 2 +-
arch/arm/mach-ux500/clock.c | 7 ++
arch/arm/mach-ux500/clock.h | 1 +
arch/arm/mach-ux500/devices-db8500.c | 6 +
arch/arm/mach-ux500/include/mach/hardware.h | 2 +
arch/arm/mach-ux500/include/mach/irqs.h | 2 +-
arch/arm/plat-mxc/include/mach/iomux-mx25.h | 42 ++++----
arch/arm/plat-omap/clock.c | 1 -
arch/arm/plat-omap/dma.c | 2 +-
arch/arm/plat-omap/dmtimer.c | 19 +++-
arch/arm/plat-omap/include/plat/cpu.h | 2 -
arch/arm/plat-omap/include/plat/omap_device.h | 7 ++
arch/arm/plat-omap/include/plat/sram.h | 1 +
arch/arm/plat-omap/mailbox.c | 2 +-
arch/arm/plat-omap/omap_device.c | 20 ++---
arch/arm/plat-omap/sram.c | 14 ++-
90 files changed, 650 insertions(+), 323 deletions(-)
next prev parent reply other threads:[~2012-03-24 22:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-24 22:02 [GIT PULL 0/9] arm-soc updates, first batch Arnd Bergmann
2012-03-24 22:02 ` Arnd Bergmann [this message]
2012-03-24 22:02 ` [GIT PULL 02/09] ARM: global cleanups Arnd Bergmann
2012-03-25 10:21 ` Arnd Bergmann
2012-03-24 22:02 ` [GIT PULL 02/09] ARM: subarch maintainer updates Arnd Bergmann
2012-03-24 22:02 ` [GIT PULL 03/09] ARM: global cleanups Arnd Bergmann
2012-03-24 22:02 ` [GIT PULL 03/09] ARM: subarch maintainer updates Arnd Bergmann
2012-03-24 22:02 ` [GIT PULL 04/09] ARM: timer cleanup work Arnd Bergmann
2012-03-24 22:02 ` [GIT PULL 05/09] ARM: SoC specific updates Arnd Bergmann
2012-03-24 22:02 ` [GIT PULL 06/09] ARM: board " Arnd Bergmann
2012-03-27 22:26 ` Olof Johansson
2012-03-24 22:02 ` [GIT PULL 07/09] remoteproc/rpmsg: new subsystem Arnd Bergmann
2012-03-24 22:02 ` [GIT PULL 08/09] ARM: driver specific updates Arnd Bergmann
2012-03-24 22:02 ` [GIT PULL 09/09] ARM: device tree work Arnd Bergmann
2012-03-25 10:50 ` [GIT PULL 0/9] arm-soc updates, first batch Russell King - ARM Linux
2012-03-25 14:55 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332626568-17812-2-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=arm@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome