mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: grant.likely@secretlab.ca, linus.walleij@stericsson.com,
	Mika Westerberg <mika.westerberg@linux.intel.com>
Subject: [PATCH 1/3] gpio: langwell: use devm_* helpers to simplify probe
Date: Thu,  5 Apr 2012 12:15:15 +0300	[thread overview]
Message-ID: <1333617317-28437-1-git-send-email-mika.westerberg@linux.intel.com> (raw)

Use devm_* helper functions where possible to make the error handling in
the probe function simpler.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpio-langwell.c |   18 +++++++-----------
 1 files changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c
index 00692e8..0bea41b 100644
--- a/drivers/gpio/gpio-langwell.c
+++ b/drivers/gpio/gpio-langwell.c
@@ -309,7 +309,7 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 
 	retval = pci_enable_device(pdev);
 	if (retval)
-		goto done;
+		return retval;
 
 	retval = pci_request_regions(pdev, "langwell_gpio");
 	if (retval) {
@@ -331,18 +331,18 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 	/* get the register base from bar0 */
 	start = pci_resource_start(pdev, 0);
 	len = pci_resource_len(pdev, 0);
-	base = ioremap_nocache(start, len);
+	base = devm_ioremap_nocache(&pdev->dev, start, len);
 	if (!base) {
 		dev_err(&pdev->dev, "error mapping bar0\n");
 		retval = -EFAULT;
 		goto err3;
 	}
 
-	lnw = kzalloc(sizeof(struct lnw_gpio), GFP_KERNEL);
+	lnw = devm_kzalloc(&pdev->dev, sizeof(struct lnw_gpio), GFP_KERNEL);
 	if (!lnw) {
 		dev_err(&pdev->dev, "can't allocate langwell_gpio chip data\n");
 		retval = -ENOMEM;
-		goto err4;
+		goto err3;
 	}
 	lnw->reg_base = base;
 	lnw->irq_base = irq_base;
@@ -361,7 +361,7 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 	retval = gpiochip_add(&lnw->chip);
 	if (retval) {
 		dev_err(&pdev->dev, "langwell gpiochip_add error %d\n", retval);
-		goto err5;
+		goto err3;
 	}
 	irq_set_handler_data(pdev->irq, lnw);
 	irq_set_chained_handler(pdev->irq, lnw_irq_handler);
@@ -376,16 +376,12 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_allow(&pdev->dev);
 
-	goto done;
-err5:
-	kfree(lnw);
-err4:
-	iounmap(base);
+	return 0;
+
 err3:
 	pci_release_regions(pdev);
 err2:
 	pci_disable_device(pdev);
-done:
 	return retval;
 }
 
-- 
1.7.9.1


             reply	other threads:[~2012-04-05  9:14 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-05  9:15 Mika Westerberg [this message]
2012-04-05  9:15 ` [PATCH 2/3] gpio: langwell: allocate IRQ descriptors dynamically for SPARSE_IRQ Mika Westerberg
2012-04-06  4:34   ` Grant Likely
2012-04-10  7:18     ` Mika Westerberg
2012-04-24 10:13     ` Mika Westerberg
2012-04-05  9:15 ` [PATCH 3/3] gpio: langwell: clear IRQ edge detect registers at init Mika Westerberg
2012-04-06  4:39   ` Grant Likely
2012-04-06  4:26 ` [PATCH 1/3] gpio: langwell: use devm_* helpers to simplify probe Grant Likely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1333617317-28437-1-git-send-email-mika.westerberg@linux.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=grant.likely@secretlab.ca \
    --cc=linus.walleij@stericsson.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome