From: Eldad Zack <eldad@fogrefinery.com>
To: "David S. Miller" <davem@davemloft.net>,
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>,
James Morris <jmorris@namei.org>,
Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Eldad Zack <eldad@fogrefinery.com>
Subject: [PATCH] net/ipv6/exthdrs.c et al: Optional strict PadN option checking
Date: Sat, 7 Apr 2012 17:16:14 +0200 [thread overview]
Message-ID: <1333811774-3219-1-git-send-email-eldad@fogrefinery.com> (raw)
In-Reply-To: <CABe5r8Kygjg0O21Y5z-F=RRQCqT7ReNya+EohAJU1jauaK536Q@mail.gmail.com>
Added strict checking of PadN. PadN can be used to increase header
size and thus push the protocol header into the 2nd fragment.
PadN is used to align the options within the Hop-by-Hop or
Destination Options header to 64-bit boundaries. The maximum valid
size is thus 7 bytes.
RFC 4942 recommends to actively check the "payload" itself and
ensure that it contains only zeroes.
See also RFC 4942 section 2.1.9.5.
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
---
Documentation/networking/ip-sysctl.txt | 7 +++++++
include/net/ipv6.h | 1 +
net/ipv6/exthdrs.c | 18 ++++++++++++++++++
net/ipv6/sysctl_net_ipv6.c | 7 +++++++
4 files changed, 33 insertions(+)
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ad3e80e..abaa1cf 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1007,6 +1007,13 @@ bindv6only - BOOLEAN
Default: FALSE (as specified in RFC3493)
+padn_strict - BOOLEAN
+ Perform strict checking of PadN.
+ TRUE: enable strict PadN checking
+ FALSE: disable strict PadN checking
+
+ Default: FALSE
+
IPv6 Fragmentation:
ip6frag_high_thresh - INTEGER
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index e4170a2..4f9af54 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -113,6 +113,7 @@ struct frag_hdr {
/* sysctls */
extern int sysctl_mld_max_msf;
+extern int sysctl_padn_strict;
extern struct ctl_path net_ipv6_ctl_path[];
#define _DEVINC(net, statname, modifier, idev, field) \
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index c486b8e..ee7a05c 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -49,6 +49,8 @@
#include <asm/uaccess.h>
+int sysctl_padn_strict;
+
int ipv6_find_tlv(struct sk_buff *skb, int offset, int type)
{
const unsigned char *nh = skb_network_header(skb);
@@ -160,6 +162,22 @@ static int ip6_parse_tlv(struct tlvtype_proc *procs, struct sk_buff *skb)
break;
case IPV6_TLV_PADN:
+ if (sysctl_padn_strict) {
+ int i;
+ /* RFC 2460 states that the purpose of PadN is
+ to align the containing header to multiples
+ of 8. 7 is therefore the highest valid value.
+ See also RFC 4942, Section 2.1.9.5.*/
+ if (optlen > 7)
+ goto bad;
+ /* RFC 4942 recommends receiving hosts to
+ actively check PadN payload to contain
+ only zeroes. */
+ for (i = 2; i < optlen; i++) {
+ if (nh[off + i] != 0)
+ goto bad;
+ }
+ }
break;
default: /* Other TLV code so scan list */
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 166a57c..c7f07f9 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -48,6 +48,13 @@ static ctl_table ipv6_table_template[] = {
.mode = 0644,
.proc_handler = proc_dointvec
},
+ {
+ .procname = "padn_strict",
+ .data = &sysctl_padn_strict,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec
+ },
{ }
};
--
1.7.9.5
next prev parent reply other threads:[~2012-04-07 15:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-07 10:44 Eldad Zack
2012-04-07 12:46 ` David Miller
[not found] ` <CABe5r8KL=c1=emU_20ODwM5OvFJS9vaKV1ux2hSmGB5tmZoJ1w@mail.gmail.com>
2012-04-07 15:13 ` Eldad Zack
2012-04-07 15:16 ` Eldad Zack [this message]
2012-04-12 20:00 ` David Miller
2012-04-12 21:31 ` Eldad Zack
2012-04-12 21:35 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1333811774-3219-1-git-send-email-eldad@fogrefinery.com \
--to=eldad@fogrefinery.com \
--cc=davem@davemloft.net \
--cc=jmorris@namei.org \
--cc=kaber@trash.net \
--cc=kuznet@ms2.inr.ac.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=yoshfuji@linux-ipv6.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®