From: Rhyland Klein <rklein@nvidia.com>
To: Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Grant Likely <grant.likely@secretlab.ca>,
Rob Herring <rob.herring@calxeda.com>,
Samuel Ortiz <sameo@linux.intel.com>
Cc: <devicetree-discuss@lists.ozlabs.org>,
<linux-kernel@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
Rhyland Klein <rklein@nvidia.com>
Subject: [PATCH 4/4] ARM: Tegra: Add support for TPS65910 PMIC
Date: Tue, 17 Apr 2012 18:00:29 -0700 [thread overview]
Message-ID: <1334710829-22777-5-git-send-email-rklein@nvidia.com> (raw)
In-Reply-To: <1334710829-22777-1-git-send-email-rklein@nvidia.com>
Add support for the tps65910 pmic on cardhu.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
---
arch/arm/boot/dts/tegra-cardhu.dts | 92 ++++++++++++++++++++++++++++++++++++
1 files changed, 92 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts
index ab8d901..7db4fac 100644
--- a/arch/arm/boot/dts/tegra-cardhu.dts
+++ b/arch/arm/boot/dts/tegra-cardhu.dts
@@ -115,6 +115,98 @@
micdet-delay = <100>;
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
};
+
+ pmic: tps65911@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+ interrupts = < 0 118 0x04 >;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,vmbch-threshold = <0>;
+ ti,vmbch2-threshold = <0>;
+ ti,regulator-ext-sleep-control = < 0
+ 0
+ 0x4 /* input EN3 */
+ 0
+ 0x1 /* input EN1 */
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0x1 /* input EN1 */
+ 0x1>; /* input EN1 */
+ ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+
+ regulators {
+ vdd1_reg: vdd1 {
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vdd2_reg: vdd2 {
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vddctrl_reg: vddctrl {
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vio_reg: vio {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ ldo5_reg: ldo5 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo6_reg: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo8_reg: ldo8 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
};
sdhci@78000000 {
--
1.7.0.4
prev parent reply other threads:[~2012-04-18 1:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-18 1:00 [PATCH 0/4] Update TPS65910 to boot using devicetree Rhyland Klein
2012-04-18 1:00 ` [PATCH 1/4] regulator: tps65910: update type for regmap Rhyland Klein
2012-04-18 9:25 ` Mark Brown
2012-04-18 20:03 ` Rhyland Klein
2012-04-18 20:19 ` Rhyland Klein
2012-04-19 12:54 ` Mark Brown
2012-04-18 1:00 ` [PATCH 2/4] regulator: tps65910: Add device tree bindings Rhyland Klein
2012-04-18 8:35 ` Mark Brown
2012-04-18 1:00 ` [PATCH 3/4] mfd: tps65910: Add device-tree support Rhyland Klein
2012-04-18 9:01 ` Mark Brown
2012-04-18 19:35 ` Rhyland Klein
2012-04-19 12:50 ` Mark Brown
2012-04-19 15:35 ` Stephen Warren
2012-04-19 16:34 ` Mark Brown
2012-04-18 1:00 ` Rhyland Klein [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334710829-22777-5-git-send-email-rklein@nvidia.com \
--to=rklein@nvidia.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lrg@ti.com \
--cc=rob.herring@calxeda.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome