From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: mingo@elte.hu, laijs@cn.fujitsu.com, dipankar@in.ibm.com,
akpm@linux-foundation.org, mathieu.desnoyers@polymtl.ca,
josh@joshtriplett.org, niv@us.ibm.com, tglx@linutronix.de,
peterz@infradead.org, rostedt@goodmis.org,
Valdis.Kletnieks@vt.edu, dhowells@redhat.com,
eric.dumazet@gmail.com, darren@dvhart.com, fweisbec@gmail.com,
patches@linaro.org, "Paul E. McKenney" <paul.mckenney@linaro.org>,
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Subject: [PATCH RFC tip/core/rcu 3/4] rcu: Make RCU_FAST_NO_HZ account for pauses out of idle
Date: Mon, 23 Apr 2012 09:16:00 -0700 [thread overview]
Message-ID: <1335197761-6577-3-git-send-email-paulmck@linux.vnet.ibm.com> (raw)
In-Reply-To: <1335197761-6577-1-git-send-email-paulmck@linux.vnet.ibm.com>
From: "Paul E. McKenney" <paul.mckenney@linaro.org>
Both Steven Rostedt's new idle-capable trace macros and the RCU_NONIDLE()
macro can cause RCU to momentarily pause out of idle without the rest
of the system being involved. This can cause rcu_prepare_for_idle()
to run through its state machine too quickly, which can in turn result
in needless scheduling-clock interrupts.
This commit therefore adds code to enable rcu_prepare_for_idle() to
distinguish between an initial entry to idle on the one hand (which needs
to advance the rcu_prepare_for_idle() state machine) and an idle reentry
due to idle-capable trace macros and RCU_NONIDLE() on the other hand
(which should avoid advancing the rcu_prepare_for_idle() state machine).
Additional state is maintained to allow the timer to be correctly reposted
when returning after a momentary pause out of idle, and even more state
is maintained to detect when new non-lazy callbacks have been enqueued
(which may require re-evaluation of the approach to idleness).
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
kernel/rcutree.c | 2 +
kernel/rcutree.h | 1 +
kernel/rcutree_plugin.h | 57 +++++++++++++++++++++++++++++++++++++++++++---
3 files changed, 56 insertions(+), 4 deletions(-)
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 1050d6d..403306b 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1829,6 +1829,8 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
rdp->qlen++;
if (lazy)
rdp->qlen_lazy++;
+ else
+ rcu_idle_count_callbacks_posted();
if (__is_kfree_rcu_offset((unsigned long)func))
trace_rcu_kfree_callback(rsp->name, head, (unsigned long)func,
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index cdd1be0..36ca28e 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -471,6 +471,7 @@ static void __cpuinit rcu_prepare_kthreads(int cpu);
static void rcu_prepare_for_idle_init(int cpu);
static void rcu_cleanup_after_idle(int cpu);
static void rcu_prepare_for_idle(int cpu);
+static void rcu_idle_count_callbacks_posted(void);
static void print_cpu_stall_info_begin(void);
static void print_cpu_stall_info(struct rcu_state *rsp, int cpu);
static void print_cpu_stall_info_end(void);
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 0f007b3..50c1797 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -1938,6 +1938,14 @@ static void rcu_prepare_for_idle(int cpu)
{
}
+/*
+ * Don't bother keeping a running count of the number of RCU callbacks
+ * posted because CONFIG_RCU_FAST_NO_HZ=n.
+ */
+static void rcu_idle_count_callbacks_posted(void)
+{
+}
+
#else /* #if !defined(CONFIG_RCU_FAST_NO_HZ) */
/*
@@ -1981,6 +1989,10 @@ static void rcu_prepare_for_idle(int cpu)
static DEFINE_PER_CPU(int, rcu_dyntick_drain);
static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff);
static DEFINE_PER_CPU(struct timer_list, rcu_idle_gp_timer);
+static DEFINE_PER_CPU(unsigned long, rcu_idle_gp_timer_expires);
+static DEFINE_PER_CPU(bool, rcu_idle_first_pass);
+static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted);
+static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted_snap);
/*
* Allow the CPU to enter dyntick-idle mode if either: (1) There are no
@@ -1993,6 +2005,8 @@ static DEFINE_PER_CPU(struct timer_list, rcu_idle_gp_timer);
*/
int rcu_needs_cpu(int cpu)
{
+ /* Flag a new idle sojourn to the idle-entry state machine. */
+ per_cpu(rcu_idle_first_pass, cpu) = 1;
/* If no callbacks, RCU doesn't need the CPU. */
if (!rcu_cpu_has_callbacks(cpu))
return 0;
@@ -2096,6 +2110,26 @@ static void rcu_cleanup_after_idle(int cpu)
static void rcu_prepare_for_idle(int cpu)
{
/*
+ * If this is an idle re-entry, for example, due to use of
+ * RCU_NONIDLE() or the new idle-loop tracing API within the idle
+ * loop, then don't take any state-machine actions, unless the
+ * momentary exit from idle queued additional non-lazy callbacks.
+ * Instead, repost the rcu_idle_gp_timer if this CPU has callbacks
+ * pending.
+ */
+ if (!per_cpu(rcu_idle_first_pass, cpu) &&
+ (per_cpu(rcu_nonlazy_posted, cpu) ==
+ per_cpu(rcu_nonlazy_posted_snap, cpu))) {
+ if (rcu_cpu_has_callbacks(cpu))
+ mod_timer(&per_cpu(rcu_idle_gp_timer, cpu),
+ per_cpu(rcu_idle_gp_timer_expires, cpu));
+ return;
+ }
+ per_cpu(rcu_idle_first_pass, cpu) = 0;
+ per_cpu(rcu_nonlazy_posted_snap, cpu) =
+ per_cpu(rcu_nonlazy_posted, cpu) - 1;
+
+ /*
* If there are no callbacks on this CPU, enter dyntick-idle mode.
* Also reset state to avoid prejudicing later attempts.
*/
@@ -2127,11 +2161,15 @@ static void rcu_prepare_for_idle(int cpu)
per_cpu(rcu_dyntick_drain, cpu) = 0;
per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
if (rcu_cpu_has_nonlazy_callbacks(cpu))
- mod_timer(&per_cpu(rcu_idle_gp_timer, cpu),
- jiffies + RCU_IDLE_GP_DELAY);
+ per_cpu(rcu_idle_gp_timer_expires, cpu) =
+ jiffies + RCU_IDLE_GP_DELAY;
else
- mod_timer(&per_cpu(rcu_idle_gp_timer, cpu),
- jiffies + RCU_IDLE_LAZY_GP_DELAY);
+ per_cpu(rcu_idle_gp_timer_expires, cpu) =
+ jiffies + RCU_IDLE_LAZY_GP_DELAY;
+ mod_timer(&per_cpu(rcu_idle_gp_timer, cpu),
+ per_cpu(rcu_idle_gp_timer_expires, cpu));
+ per_cpu(rcu_nonlazy_posted_snap, cpu) =
+ per_cpu(rcu_nonlazy_posted, cpu);
return; /* Nothing more to do immediately. */
} else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) {
/* We have hit the limit, so time to give up. */
@@ -2171,6 +2209,17 @@ static void rcu_prepare_for_idle(int cpu)
trace_rcu_prep_idle("Callbacks drained");
}
+/*
+ * Keep a running count of callbacks posted so that rcu_prepare_for_idle()
+ * can detect when something out of the idle loop posts a callback.
+ * Of course, it had better do so either from a trace event designed to
+ * be called from idle or from within RCU_NONIDLE().
+ */
+static void rcu_idle_count_callbacks_posted(void)
+{
+ __this_cpu_add(rcu_nonlazy_posted, 1);
+}
+
#endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */
#ifdef CONFIG_RCU_CPU_STALL_INFO
--
1.7.8
next prev parent reply other threads:[~2012-04-23 16:17 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-23 16:15 [PATCH RFC tip/core/rcu 0/4] Updates to RCU_FAST_NO_HZ Paul E. McKenney
2012-04-23 16:15 ` [PATCH RFC tip/core/rcu 1/4] rcu: Add RCU_FAST_NO_HZ tracing for idle exit Paul E. McKenney
2012-04-23 16:15 ` [PATCH RFC tip/core/rcu 2/4] rcu: Make RCU_FAST_NO_HZ use timer rather than hrtimer Paul E. McKenney
2012-04-23 16:16 ` Paul E. McKenney [this message]
2012-04-26 13:00 ` [PATCH RFC tip/core/rcu 3/4] rcu: Make RCU_FAST_NO_HZ account for pauses out of idle Peter Zijlstra
2012-04-26 14:49 ` Paul E. McKenney
2012-04-26 15:09 ` Peter Zijlstra
2012-04-23 16:16 ` [PATCH RFC tip/core/rcu 4/4] rcu: Ensure that RCU_FAST_NO_HZ timers expire on correct CPU Paul E. McKenney
2012-04-26 13:04 ` Peter Zijlstra
2012-04-26 15:54 ` Paul E. McKenney
2012-04-26 16:08 ` Steven Rostedt
2012-04-26 17:56 ` Paul E. McKenney
2012-04-26 18:10 ` [PATCH] timer: Fix mod_timer_pinned() header commen (was: [PATCH RFC tip/core/rcu 4/4] rcu: Ensure that RCU_FAST_NO_HZ timers expire on correct CPU) Steven Rostedt
2012-04-26 18:36 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335197761-6577-3-git-send-email-paulmck@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=Valdis.Kletnieks@vt.edu \
--cc=akpm@linux-foundation.org \
--cc=darren@dvhart.com \
--cc=dhowells@redhat.com \
--cc=dipankar@in.ibm.com \
--cc=eric.dumazet@gmail.com \
--cc=fweisbec@gmail.com \
--cc=josh@joshtriplett.org \
--cc=laijs@cn.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@polymtl.ca \
--cc=mingo@elte.hu \
--cc=niv@us.ibm.com \
--cc=patches@linaro.org \
--cc=paul.mckenney@linaro.org \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®