From: Przemo Firszt <przemo@firszt.eu>
To: pinglinux@gmail.com, jkosina@suse.cz
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
linuxwacom-devel@lists.sourceforge.net,
Przemo Firszt <przemo@firszt.eu>
Subject: [PATCH] HID: wacom: Add LED selector control for Wacom Intuos4 WL
Date: Mon, 7 May 2012 13:53:38 +0100 [thread overview]
Message-ID: <1336395218-6865-1-git-send-email-przemo@firszt.eu> (raw)
Add sysfs attribute to control LED selector on Wacom Intuos4. There are 4
different LEDs on the tablet and they can be turned on by something like:
echo 1 > /sys/class/bluetooth/hci0:1/(dev no here)/wacom_led/status_led0_select
The status_led0_select range is 0 to 3. The brightness of the LED selector can
be controlled as well, but this patch uses a fixed value (0x0F) and the
selector is also permanently switched on. The naming of the attribute
(wacom_led/status_led0_select) is the same is in USB driver for Intuos4 Wl.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
---
drivers/hid/hid-wacom.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index a66e1aa..c5c6ec6 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -31,6 +31,8 @@
#define PAD_DEVICE_ID 0x0F
+#define WAC_CMD_LED_CONTROL 0x20
+
struct wacom_data {
__u16 tool;
__u16 butstate;
@@ -44,6 +46,7 @@ struct wacom_data {
__u8 ps_connected;
struct power_supply battery;
struct power_supply ac;
+ __u8 led_selector;
};
/*percent of battery capacity for Graphire
@@ -64,6 +67,88 @@ static enum power_supply_property wacom_ac_props[] = {
POWER_SUPPLY_PROP_SCOPE,
};
+static void wacom_led_control(struct hid_device *hdev)
+{
+ struct wacom_data *wdata = hid_get_drvdata(hdev);
+ unsigned char *buf;
+ __u8 led = 0;
+
+ buf = kzalloc(9, GFP_KERNEL);
+ if (buf) {
+ led = wdata->led_selector | 0x4;
+
+ buf[0] = WAC_CMD_LED_CONTROL;
+ buf[1] = led;
+ buf[2] = 0x0F;
+ hdev->hid_output_raw_report(hdev, buf, 9, HID_FEATURE_REPORT);
+
+ kfree(buf);
+ }
+
+ return;
+}
+
+static ssize_t wacom_led0_select_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct wacom_data *wdata = hid_get_drvdata(hdev);
+ int new_led;
+
+ if (sscanf(buf, "%1d", &new_led) != 1)
+ return -EINVAL;
+
+ wdata->led_selector = new_led & 0x03;
+
+ wacom_led_control(hdev);
+ return strnlen(buf, PAGE_SIZE);
+}
+
+static ssize_t wacom_led0_select_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct wacom_data *wdata = hid_get_drvdata(hdev);
+
+ return snprintf(buf, 2, "%d\n", wdata->led_selector);
+}
+
+static DEVICE_ATTR(status_led0_select, S_IWUSR | S_IRUSR,
+ wacom_led0_select_show, wacom_led0_select_store);
+
+static struct attribute *intuos4_led_attrs[] = {
+ &dev_attr_status_led0_select.attr,
+ NULL
+};
+
+static struct attribute_group intuos4_led_attr_group = {
+ .name = "wacom_led",
+ .attrs = intuos4_led_attrs,
+};
+
+static int wacom_initialize_leds(struct hid_device *hdev)
+{
+ struct wacom_data *wdata = hid_get_drvdata(hdev);
+ int ret;
+
+ wdata->led_selector = 0;
+ ret = sysfs_create_group(&hdev->dev.kobj, &intuos4_led_attr_group);
+
+ if (ret) {
+ dev_err(&hdev->dev,
+ "cannot create sysfs group err: %d\n", ret);
+ return ret;
+ }
+ wacom_led_control(hdev);
+
+ return 0;
+}
+
+static void wacom_destroy_leds(struct hid_device *hdev)
+{
+ sysfs_remove_group(&hdev->dev.kobj, &intuos4_led_attr_group);
+}
+
static int wacom_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -602,6 +687,12 @@ static int wacom_probe(struct hid_device *hdev,
sprintf(hdev->name, "%s", "Wacom Intuos4 WL");
wdata->features = 0;
wacom_set_features(hdev);
+ ret = wacom_initialize_leds(hdev);
+ if (ret) {
+ hid_warn(hdev,
+ "can't create led attribute, err: %d\n", ret);
+ goto destroy_leds;
+ }
break;
}
@@ -644,6 +735,8 @@ err_ac:
err_battery:
device_remove_file(&hdev->dev, &dev_attr_speed);
hid_hw_stop(hdev);
+destroy_leds:
+ wacom_destroy_leds(hdev);
err_free:
kfree(wdata);
return ret;
--
1.7.10
next reply other threads:[~2012-05-07 12:54 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-07 12:53 Przemo Firszt [this message]
2012-05-07 13:09 ` Jiri Kosina
2012-05-07 13:18 ` Przemo Firszt
2012-05-07 19:40 Przemo Firszt
2012-05-10 10:09 ` Jiri Kosina
2012-05-10 18:21 ` Przemo Firszt
2012-05-10 18:23 Przemo Firszt
2012-05-11 12:48 ` Jiri Kosina
2012-05-20 2:11 ` David Rientjes
2012-05-21 13:28 ` Jiri Kosina
2012-05-21 14:08 ` Przemo Firszt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336395218-6865-1-git-send-email-przemo@firszt.eu \
--to=przemo@firszt.eu \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxwacom-devel@lists.sourceforge.net \
--cc=pinglinux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®